Zone Offroad 6-Inch Lift Kit — Ford F-150 (2WD) SKU: ZONF122N

This kit lifts the 2021–2026 Ford F-150 RWD 6 inches up front and 3 inches in the rear using high-strength crossmembers, redesigned steering knuckles, and strut spacers paired with a rear block kit and Zone Nitro Series rear shocks — engineered to correct suspension, steering, and driveline geometry while maintaining ESC system compliance and Blue Cruise compatibility.

Before ordering: Fits 2021–2026 Ford F-150, RWD (2WD) only. Does not fit diesel models. Does not fit Tremor models. Does not fit 4WD configurations. Installation requires frame bracket modification. Trucks with a 2-piece rear driveshaft require carrier bearing shim kit D5406, sold separately. Confirm your model year's supported trim before ordering — trim availability narrows significantly for 2024 and later years.

Required separately: Carrier bearing shim kit D5406 (required for 2-piece rear driveshaft models). ADAS sensor recalibration by a dealership or ADAS service center is required after installation — all associated costs are the vehicle owner's responsibility.

Verified Fitment

Diesel exclusion: Does not fit diesel models in any year.

Tremor exclusion: Does not fit Tremor models.

4WD exclusion: This kit is for RWD (2WD) F-150 configurations only.

2024 trim note: King Ranch, Lariat, Limited, and Platinum trims are not listed in Zone's fitment data for the 2024 model year. Supported 2024 trims are SSV, STX, XL, and XLT only.

2025 trim note: Supported 2025 trims are STX, XL, and XLT only.

Ford Recall 21S25: Zone Offroad recommends completing Ford Safety Recall 21S25 (rear driveshaft) prior to installing this kit on affected trucks.

Component Specifications

What Is and Is NOT Included

Included:

• High-strength crossmembers (lower control arm positioning correction)
• Redesigned application-specific steering knuckles (geometry and ESC compatibility correction)
• Strut spacers (6" front lift)
• Rear lift blocks and extended u-bolts (3" rear lift — this configuration)
• Zone Nitro Series rear shocks
• All required installation hardware

Not included:

• Carrier bearing shim kit D5406 (required for 2-piece rear driveshaft models, sold separately)
• 4-Inch Block Kit rear lift option (separate configuration, not this SKU/configuration)
• ADAS recalibration (required post-installation, performed by dealership or ADAS service center)

Critical Compatibility

• Diesel exclusion: Does not fit diesel models. Gas and flex fuel only.
• Tremor exclusion: Does not fit Tremor models.
• 4WD exclusion: RWD (2WD) F-150 only. Does not fit 4WD configurations.
• Trim availability by year: King Ranch, Lariat, Limited, and Platinum trims are supported for 2021–2023 only. For 2024, 2025, and 2026, only SSV, STX, XL, and XLT are listed in Zone's verified fitment data.
• Frame bracket modification required: Installation requires modification of the frame bracket. This is not optional.
• 2-piece rear driveshaft: Models with a 2-piece rear driveshaft require carrier bearing shim kit D5406 (not included, sold separately). Confirm driveshaft configuration before ordering.
• Ford Recall 21S25: If your truck is subject to Ford Safety Recall 21S25 (rear driveshaft), complete that recall procedure before installing this kit.
• Rear block: This configuration uses the 3-inch block kit, which provides a tail-low to level stance. The 4-inch block kit (level to tail-high stance) is a separate configuration. Block kits replace the factory 1-1/4" block — the stock block will not be reinstalled.
• Crash bars: Crash bars may require modification depending on wheel and tire choice. It is the end user's responsibility to ensure all modifications are non-detrimental to vehicle safety.
• ADAS recalibration: After installation, cameras, radar, LiDAR, and other ADAS sensors — including lane keeping, blind-spot detection, adaptive cruise control, and parking assistance — require recalibration by a dealership or certified ADAS service center. All recalibration costs are the vehicle owner's responsibility.
• Tire fitment: 35" tires are confirmed. Up to 37x12.50 tires may be achievable depending on wheel and tire configuration; trimming may be required. Wheel backspacing specifications for 37" tire configurations were not supplied in the source documentation — confirm with Zone Offroad before selecting a 37" tire and wheel combination.

Installation Notes

Professional installation is strongly recommended for this kit, which is rated Difficult with an estimated 8–10-hour install time. A professional alignment must be completed after installation. ADAS sensor recalibration by a dealership or ADAS service center is also required after installation.

Required tools: 204-592 Ball Joint Separator (recommended), Tie Rod End Separator (recommended), torque wrench, reciprocating saw, socket wrench.

Before beginning installation: Confirm driveshaft configuration. If the truck has a 2-piece rear driveshaft, carrier bearing shim kit D5406 must be on hand. If the truck is subject to Ford Recall 21S25, complete that recall procedure first.

Frame modification: This installation requires frame bracket modification. Follow the Zone Offroad installation instructions for the approved procedure.

Refer to the current Zone Offroad installation instructions supplied with this kit for complete procedures, torque specifications, and all safety requirements.

The Obsidian Take

The ZONF122N gives the 2021–2026 Ford F-150 RWD a 6-inch front and 3-inch rear lift — this configuration is the 3-inch block kit (tail-low to level stance) with Zone Nitro Series rear shocks and strut spacers up front retaining the OE strut. The redesigned steering knuckles are application-specific to the 2021–2025 F-150 and maintain ESC compliance and Blue Cruise functionality. Five conditions to confirm before ordering: RWD only (no 4WD); gas and flex fuel only (no diesel); no Tremor models; frame bracket modification is required; and 2-piece driveshaft trucks need carrier bearing shim kit D5406 (not included). For 2024 and later, only SSV, STX, XL, and XLT are in Zone's supported trim list — King Ranch, Lariat, Limited, and Platinum buyers on a 2024 or newer truck should verify fitment with Zone directly before ordering.

This Product Is For You If

• You own a 2021–2026 Ford F-150 RWD, gas or flex fuel, in a supported trim for your model year.
• You want a 6" front / 3" rear lift (tail-low to level stance) with geometry-corrected steering knuckles.
• You want Zone Nitro Series rear shocks included.
• You are prepared for a Difficult-rated, 8–10-hour installation requiring a reciprocating saw, frame bracket modification, and pitman arm puller.
• You have confirmed your driveshaft configuration and sourced D5406 if your truck has a 2-piece rear driveshaft.
• You are prepared to complete ADAS recalibration at a dealership or ADAS service center after installation.

This Product Is Not For You If

• Your F-150 is a diesel model.
• Your F-150 is a Tremor model.
• Your F-150 is a 4WD configuration.
• Your 2024, 2025, or 2026 F-150 is a King Ranch, Lariat, Limited, or Platinum trim — those trims are not in Zone's verified fitment for those years.
• You have a 2-piece rear driveshaft and are not prepared to obtain carrier bearing shim kit D5406 before installation.
• You want the tail-high to level stance — that requires the separate 4-inch block kit configuration.
• You are not prepared for frame bracket modification during installation.
• You are not prepared to complete ADAS recalibration after installation.

Common Questions

Does this kit fit diesel F-150 trucks?
No. Gas and flex fuel models only.

Does this fit the F-150 Tremor?
No. Tremor models are explicitly excluded.

Does this fit 4WD F-150 trucks?
No. This kit is for RWD (2WD) configurations only.

I have a 2024 F-150 Lariat — does this fit?
The Lariat trim is not listed in Zone's verified fitment data for the 2024 model year. Contact Zone Offroad directly to confirm before ordering.

My F-150 has a 2-piece rear driveshaft — what do I need?
Carrier bearing shim kit D5406 is required. It is not included with this kit. Confirm your driveshaft configuration and source the shim kit before ordering.

What is the difference between the 3-inch and 4-inch rear block options?
The 3-inch block kit (this configuration) provides a tail-low to level stance. The 4-inch block kit provides a level to tail-high stance. Both replace the factory 1-1/4" block — the stock block is not reinstalled.

Will 37" tires fit?
35" tires are confirmed for this kit. Up to 37x12.50 tires may fit depending on wheel and tire configuration, but trimming may be required and specific backspacing specifications for 37" combinations were not provided in the source documentation. Confirm with Zone Offroad before selecting a 37" tire and wheel setup.

Does this kit maintain Blue Cruise and ESC compatibility?
Yes. The application-specific redesigned steering knuckles are engineered to maintain ESC system compliance, and the kit is confirmed to function with Ford Blue Cruise.

Is ADAS recalibration required?
Yes. After installation, all ADAS systems including lane keeping, blind-spot detection, adaptive cruise control, and parking assistance require recalibration by a dealership or certified ADAS service center. All recalibration costs are the vehicle owner's responsibility.

What does this kit's warranty cover?
This kit is backed by Factory Protection Plus: a 5-year/60,000-mile drivetrain warranty plus Zone Offroad's Limited Lifetime Warranty. See the full warranty summary below.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and installation data for this kit are sourced from Zone Offroad manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.

Required Legal, Warning, Fitment, and Return Notices

Installation Warning: Zone Offroad strongly recommends installation by a certified mechanic. If installed by a non-certified person, the installer must read, understand, and follow all instructions and warnings before beginning.

ADAS Notice: Recalibration of your vehicle's Advanced Driver Assistance System cameras, radars, LiDAR, and other sensors may be required by your dealership or ADAS service center after installation. All charges and expenses related to recalibration are the sole responsibility of the vehicle owner.

California Residents: Confirm California compliance for modified-height vehicles before purchase.

Warranty Summary: This kit is backed by Factory Protection Plus, which provides a 5-year/60,000-mile drivetrain warranty combined with Zone Offroad's Limited Lifetime Warranty for the original retail purchaser. Zone Offroad also provides a 3-year/36,000-mile Worry-Free Warranty on all hard parts and wearable items (ball joints, tie rod ends, and bushings) to the original retail purchaser, based on whichever limit is reached first. After the 3-year/36,000-mile period, the Limited Lifetime Warranty applies, covering defects in materials and workmanship for as long as the original purchaser owns the vehicle on which the product was installed. Warranty coverage does not extend to consumer opinions regarding ride comfort, fitment, or design.

Finish Warranty: Product finish may be considered for warranty within 12 months of purchase. Damage caused by tools, road debris, trail use, general maintenance, or salty and corrosive environments is excluded.

Zone Offroad Nitro Series Shocks: Shock oil seal wear is not covered under warranty. Leaking shock seals that occur within 2 years of purchase, free from contamination, damage, or abnormal wear resulting from misuse, may be considered for warranty review.

Commercial vehicles: Warranty is limited to 1 year for commercial application vehicles.

Warranty exclusions: This warranty does not cover damage or failure resulting from abuse, neglect, accident, fire, improper installation or adjustment, or corrosion; modifications beyond Zone Offroad specifications; use in an application other than those specified in current Zone Offroad documentation; competition or racing use; or products that wear out due to the use of larger-than-specified wheels or tires.

Not covered under any warranty term: Labor for removal or reinstallation, expedited freight charges, damage to related vehicle components, vehicle downtime costs, lost profits, and incidental or consequential damages.

To file a claim: Contact Zone Offroad directly at Tech-Zone@ridefox.com or 888-998-9663. Only Zone Offroad can approve or deny a warranty request. Proof of purchase is required, including customer name, purchase date, vehicle mileage, product number, and price paid. Product photos are also required. If the claim is approved, Zone Offroad will replace or repair the product and cover ground shipping at no cost. If the defective part must be returned, a prepaid return shipping label will be provided.