sPOD SourceLT Wireless | App-Controlled 6-Circuit Power | Jeep Wrangler JL / Gladiator JT | SKU 870119
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD SourceLT Wireless Switch Controller (SKU 870119) is the vehicle-specific 6-circuit solid-state power management system for the 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT. All 6 circuits are controlled entirely through the sPOD app on your phone or tablet — no physical switch panel required in the cabin. The SourceLT module mounts under the hood via the included Jeep-specific bracket. No wires cut, no factory circuits tapped, no cab penetration required. Operates on 12V DC. Entry tier in the JL/JT sPOD wireless lineup.
This system does NOT fit the Jeep Wrangler 392 V8. For the 392, order the 392-specific sPOD wireless SKU. This system is not expandable beyond 6 circuits. If your build requires 8 circuits now or in the future, order the BantamX Wireless (870118) instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870119 |
| Brand | sPOD |
| Product Line | SourceLT Wireless Switch Controller |
| Control Interface | Wireless — sPOD app (iOS and Android) — no physical panel |
| Platform | 2018–2026 Jeep Wrangler JL / 2020–2026 Jeep Gladiator JT — non-392, non-diesel (see lockouts) |
| Number of Circuits | 6 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Max Circuit Load Range | 1.5A – 30A per circuit (self-healing) |
| System Protection Fuse | 100A in-line fuse |
| Operating Voltage | 12V DC only — does NOT operate on 24V |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Override | Optional override available |
| Expandability | Not expandable — closed 6-circuit system |
| Terminal Block | 12-position terminal block |
| Bluetooth | Built-in; controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Battery Cable Length | 84 inches |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Mounting | Jeep-specific under-hood bracket included |
| Finish | Powdercoat black |
| Dimensions | 12.0 x 10.0 x 10.0 inches |
| Shipping Weight | 6.5 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Each |
JL/JT sPOD Wireless System Selector
| SKU | System | Circuits | Voltage | Expandable | Price vs 870119 |
|---|---|---|---|---|---|
| 870119 (this listing) | SourceLT Wireless | 6 | 12V DC only | No | — |
| 870118 | BantamX Wireless | 8 | 12V or 24V DC | Yes — to 32 | +$110 |
| 870122 | BantamX Wireless 392 V8 | 8 | 12V or 24V DC | Yes — to 32 | +$205 |
Choose 870119 if your build is running 6 or fewer accessories and you have no plans to expand. Choose 870118 if you need 8 circuits, plan to expand, or want 24V compatibility. The SourceLT is a closed system — it cannot be upgraded to 8 circuits later without replacing the module entirely.
Kit Contents
- sPOD SourceLT solid-state module (6-circuit)
- Jeep-specific under-hood mounting bracket
- 84-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- All required installation hardware
Critical Compatibility — Does NOT Fit
FITMENT GATE: Standard JL/JT platform only. Does not fit the 392 V8. Confirm your engine before ordering. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| Jeep Wrangler 392 V8 — all years | Does NOT fit. Different engine bay layout. Order the 392-specific sPOD wireless SKU. |
| Jeep Wrangler JL — 4xe Plug-In Hybrid | Requires a special bracket not included in this kit. Text (469) 407-7538 before ordering. |
| Jeep Wrangler JL / Gladiator JT — diesel engine | Requires a special bracket not included in this kit. Text (469) 407-7538 before ordering. |
| Jeep Wrangler JK — 2007–2018 | Different platform. Order a JK-specific sPOD SourceLT kit. |
| 2019 or earlier Jeep Gladiator JT | Gladiator JT launched in 2020. No 2019 JT exists. |
| Jeep Wrangler TJ, LJ, YJ, CJ — all years | Not compatible with this SKU. |
| Builds requiring more than 6 circuits | The SourceLT is a closed 6-circuit system with no expansion path. Order 870118 (BantamX Wireless) for 8 expandable circuits. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Common Questions
What is the difference between the SourceLT Wireless and the BantamX Wireless for the same JL/JT platform? Three meaningful differences. First, circuits: SourceLT gives you 6, BantamX gives you 8. Second, expandability: SourceLT is a closed system — it cannot grow beyond 6 circuits. BantamX is expandable to 32 channels. Third, voltage: SourceLT operates on 12V DC only. BantamX operates on 12V or 24V DC. If your current build is at 6 accessories and you have no plans to expand, the SourceLT is the right call at a lower price. If there is any chance you add accessories later, the BantamX is the better foundation.
This system does not fit the 392 V8 — how do I confirm my engine? Check your window sticker, door jamb label, or VIN decoder. If it shows 2.0L, 3.6L, or 4xe, this kit fits your platform. If it shows 392 or 6.4L HEMI, order the 392-specific sPOD wireless SKU instead. Text (469) 407-7538 if you need help confirming before ordering.
Does installation require cutting factory wires or tapping into the JL harness? No. The SourceLT module connects directly to the battery via the included 84-inch cable set and mounts under the hood via the Jeep-specific bracket. No factory circuits are tapped, no wires are cut, no cab penetration required.
Can I upgrade to 8 circuits later without replacing the module? No. The SourceLT is a closed 6-circuit system with no expansion ports. If you need 8 circuits now or plan to add accessories, order the BantamX Wireless (870118) instead. Upgrading later means replacing the entire module.
What does installation actually take — time, tools, and skill level? Intermediate DIY level. No wire cutting, drilling, or crimping required. The Jeep-specific bracket eliminates guesswork on under-hood placement. Plan for 1.5–2 hours. Basic hand tools handle the battery terminal connections. If you are not comfortable working at the battery terminals, have a qualified automotive electrician complete that step. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The SourceLT Wireless (870119) is for the JL or JT owner running 6 accessories or fewer who wants app-controlled power management without a switch panel, without cab wiring, and without paying for capacity they will never use. It is the cleanest, simplest entry point in the JL/JT sPOD wireless lineup.
The one decision to make honestly before ordering is whether 6 circuits is actually your ceiling. If you are already at 5 accessories and have a winch, compressor, or light bar still on the wish list, order the BantamX (870118) now. The SourceLT has no upgrade path — replacing it later costs more than buying up front.
Six circuits. App control. Nothing in the cab. If that is all you need, this is all you need.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.