Can-Am Maverick R Mini6 SourceLT Center Console Kit SKU: 870139

Verified Fitment

This vehicle-specific center console kit is listed for the 2024–2026 Can-Am Maverick R.

Component Specifications

What Is and Is NOT Included

Critical Compatibility

• Designed for the 2024–2026 Can-Am Maverick R.
• Use only the included sPOD battery cables on the positive and negative terminal studs of the SourceLT board. Attaching any other cable to these terminals voids the warranty.
• Connecting the battery cables with reversed polarity voids the warranty.
• Do not connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post used by the SourceLT system. Per manufacturer documentation, this will cause irreversible damage to the system and voids all warranties.
• Do not cut, splice, or otherwise modify the supplied wiring, connectors, or switches, and do not remove actuators without the manufacturer's specific actuator removal tool. Any of these actions voids the warranty.

Installation Notes

• Required tools: 7/16" socket, No. 2 Phillips screwdriver, 10mm socket.
• No cutting, wire-fishing, or tapping into the vehicle's factory electrical system is required.
• Park the vehicle on level ground with the parking brake engaged before beginning installation.
• The SourceLT PCM mounts to the included console bracket and connects to the vehicle's stock battery posts using the supplied battery cable set.
• The included ethernet cable routes from the PCM to the Mini6 switch panel, which installs into the vehicle's factory accessory switch opening.
• Route and secure all wiring away from sharp, hot, or rotating components.
• Re-torque all fasteners after the first 100 miles of use.
• Full manufacturer installation instructions for this application are available from sPOD/Baja Designs.

The Obsidian Take

The SourceLT Mini6 kit gives Maverick R (2024–2026) owners six independently switched, 30-amp circuits with integrated low-voltage cutoff protection and built-in Bluetooth control, installed using the vehicle's factory battery posts rather than cutting or splicing into the stock wiring. It suits owners adding multiple aftermarket electrical accessories who want a single, vehicle-specific control point instead of wiring individual switches and relays for each add-on.

This Product Is For You If

• You own a 2024–2026 Can-Am Maverick R.
• You are adding aftermarket electrical accessories and need up to 6 independently switched, 30-amp circuits.
• You want to operate accessories from the included Mini6 panel or via Bluetooth rather than factory switches.
• You want a no-cut, no-splice installation using the vehicle's existing battery posts.
• You want integrated low-voltage cutoff protection on your accessory circuits.

This Product Is Not For You If

• Your vehicle is not a 2024–2026 Can-Am Maverick R.
• You need more than 6 independently switched circuits.
• You plan to attach an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the SourceLT.
• You intend to cut, splice, or otherwise modify the supplied wiring, switches, or connectors.
• Connecting the battery cables with reversed polarity voids the warranty.

Common Questions

Does installation require cutting or splicing into the Maverick R's wiring?
No. The kit connects to the vehicle's factory battery posts using the included battery cables; no cutting, wire-fishing, or tapping into the factory electrical system is required.

How many accessories can this kit control?
The SourceLT Mini6 provides 6 circuits, each rated at 30 amps at 12.5 VDC.

Can I control the system remotely?
Yes. The SourceLT has built-in Bluetooth for remote control.

What voltage systems does this support?
The SourceLT operates on 12 VDC or 24 VDC.

What tools do I need to install this kit?
A 7/16" socket, a No. 2 Phillips screwdriver, and a 10mm socket.

What is the warranty on this kit?
sPOD provides a 5-year limited warranty on electronic parts and components against manufacturer defects, subject to the exclusions listed below.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and installation data for this kit are sourced from sPOD/Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.

Required Legal, Warning, Fitment, and Return Notices

California Proposition 65 Warning: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.

Warranty Summary: sPOD provides a non-transferable 5-year limited warranty on electronic parts and components against manufacturer defects, effective on products purchased after April 1, 2023. sPOD will repair or replace qualifying items. This warranty excludes damage or failure resulting from: installation errors; abuse, misuse, or crash damage; reverse battery cable polarity; cutting or splicing sPOD connectors or wiring; attaching non-sPOD cables to the positive/negative terminal studs; modifying the supplied switches; removing the actuator without the specific actuator removal tool; and water, liquid, or chemical damage. Attaching an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the SourceLT causes irreversible damage and voids all warranties. Normal wear and tear is not covered. A copy of the original invoice or completed product registration is required to file a warranty claim.