sPOD SourceLT Kit | Red LED | 6-Circuit | 2007-2008 Jeep Wrangler JK Early | SKU 873185
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD SourceLT Kit (SKU 873185) is the vehicle-specific 6-circuit solid-state power management system for the 2007–2008 Jeep Wrangler JK (early JK platform) with a Red LED switch panel. Battery harness and mounting hardware engineered specifically for the early JK's PDC layout and engine bay architecture — not interchangeable with the 2009–2018 late JK kit. Single CAT-6 cable into the cab. No wires cut, no factory circuits tapped. Operates on 12V DC. Red LED — maximum night vision preservation for dedicated trail and off-road builds.
If your JK is 2009 or later, this kit does NOT fit. Confirm your model year via VIN: 10th character 7 = 2007, 8 = 2008.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 873185 |
| Brand | sPOD |
| Product Line | SourceLT Kit — Early JK Platform |
| LED Switch Panel Color | Red |
| Platform | 2007–2008 Jeep Wrangler JK and JK Unlimited only |
| Number of Circuits | 6 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC only — does NOT operate on 24V |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Override | Optional override available |
| Expandability | Not expandable — closed 6-circuit system |
| Terminal Block | 12-position terminal block |
| Controller Cable | 10 ft CAT-6 Ethernet (switch panel to SourceLT module) |
| CAT-6 Max Run | Up to 25 ft from SourceLT to switch panel |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid — early JK specific harness |
| Wiring Sleeves | High-temp abrasion-resistant nylon braided sleeving on all wires |
| Housing — Base | Powder-coated steel with integrated hardware |
| Housing — Lid | Aluminum; thumb-screw fastening; silkscreened legend outlines |
| Programmable Modes | On/off (latch), Momentary, Strobe, Dimming |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Early JK vs. Late JK — Critical Platform Split
| Platform | Years | SKU |
|---|---|---|
| Early JK — Red LED SourceLT | 2007–2008 | 873185 (this listing) |
| Late JK — Red LED SourceLT (non-Genesis) | 2009–2018 | Confirm late JK Red SKU |
Not interchangeable. Confirm via VIN 10th character: 7 = 2007, 8 = 2008, 9 = 2009.
Early JK SourceLT Panel Color Options
| SKU | LED Color | Best For |
|---|---|---|
| 873100 | Amber | Night vision-friendly, warm spectrum — trail and mixed-use builds |
| 873110 | Blue | High-contrast visibility — daily drivers and mixed-use builds |
| 873160 | Green | All-around visibility — best readability across all lighting conditions |
| 873185 (this listing) | Red | Maximum night vision preservation — dedicated dark trail builds |
All four kits are identical in circuit count, amp rating, features, and early JK platform harness. Color refers to LED switch illumination only.
JK SourceLT vs. JK BantamX — 6 Circuits or 8
| System | Circuits | Platform Split | Expandable | Interface |
|---|---|---|---|---|
| SourceLT LED kits (this listing) | 6 | Separate early/late JK SKUs | No | Carling LED panel |
| BantamX LED kits (870050–870080) | 8 | Separate early/late JK SKUs | Yes — to 32 | Carling LED panel |
| BantamX HD — 870020 | 8 | Single SKU — full 2007–2018 | Yes — to 32 | HD silicone-button panel |
If 6 circuits covers the build and Red LED is the right color, this is the correct kit. If there is any chance of needing more circuits, order the BantamX Red LED for the early JK (870080) instead.
Kit Contents
- sPOD SourceLT solid-state module (6-circuit)
- Red LED switch panel
- Early JK-specific battery harness (hi-strand crosslinked copper, silicone jacket, nylon braid)
- 10-ft CAT-6 Ethernet controller cable
- Vehicle-specific mounting hardware
- All required installation hardware
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Jeep Wrangler JK (2-door) — Sport, Sahara, Rubicon, X | 2007–2008 | ✓ |
| Jeep Wrangler JK Unlimited (4-door) — all trims | 2007–2008 | ✓ |
| Jeep Wrangler JK / JKU (late) | 2009–2018 | ✗ Different harness — order late JK Red SourceLT |
| Jeep Wrangler JL / JLU | 2018–2026 | ✗ Does not fit |
| Jeep Gladiator JT | 2020–2026 | ✗ Does not fit |
| Jeep Wrangler TJ / LJ | All years | ✗ Does not fit |
Critical Compatibility — Does NOT Fit
FITMENT: 2007–2008 early JK only. Confirm VIN before ordering. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2009–2018 Jeep Wrangler JK (Late JK) | Different PDC layout and harness. Order the late JK Red SourceLT instead. |
| Jeep Wrangler JL / JLU | Different platform. Does not fit. |
| Jeep Gladiator JT | Different platform. Does not fit. |
| Builds requiring more than 6 circuits | SourceLT is a closed 6-circuit system. Order the early JK BantamX Red LED (870080) for 8 expandable circuits. |
| Winches and high-draw recovery motors | 30A max per circuit. Wire winches direct to battery through a dedicated relay. |
Common Questions
How do I confirm my JK is 2007 or 2008 and not 2009+? Check the 10th character of your VIN: 7 = 2007, 8 = 2008, 9 = 2009. Confirm on your window sticker or door jamb. Installing the wrong year kit results in a harness mismatch that requires a return.
Why Red LED for an early JK trail build? Red sits at the far end of the visible spectrum and causes the least pupil contraction — your eyes stay dark-adapted when you look away from the panel. For a 2007–2008 JK running dark canyon roads, backcountry routes, or extended night trail sessions, Red provides the maximum night vision preservation of any LED color in the lineup. For a JK that sees regular street use, Amber (873100) is more versatile.
SourceLT vs. BantamX for the early JK — which is right? Circuit count. If your early JK build runs 6 accessories or fewer with no expansion plans, the SourceLT is the correct and lower-cost choice. If there is any chance the build grows past 6 circuits, order the BantamX Red LED (870080) for 8 expandable circuits at the same early JK platform fitment.
Does installation require cutting factory wires? No. The SourceLT module connects directly to the battery via the included early JK-specific harness. A single CAT-6 cable runs from the module to the switch panel. No factory circuits are tapped, no wires are cut.
The Obsidian Take
The SourceLT Kit (873185) is for the 2007–2008 JK owner who wants 6 circuits of clean, fuse-free accessory power with a Red LED panel — maximum night vision preservation, early JK platform harness, and a closed 6-circuit system at the entry price point for this platform.
VIN check before ordering — 10th character must be 7 or 8. If the build has any chance of growing past 6 circuits, order the BantamX Red LED (870080) instead. If 6 circuits is genuinely the ceiling, this is your kit.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your VIN, window sticker, or door jamb label before ordering. Manufacturer specifications are subject to change without notice.