sPOD Mini6 SourceLT Kit | 6-Circuit Power Management | 2021-2026 Ford F-150 & F-150 Raptor | SKU 870088
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD Mini6 SourceLT Kit (SKU 870088) is the vehicle-specific 6-circuit solid-state power management system engineered for the 2021–2026 Ford F-150 and F-150 Raptor (14th Generation). The Mini6 switch panel integrates directly into the F-150's in-cab sunglass holder via a vehicle-specific mounting plate — no universal pod brackets, no exposed wiring. The SourceLT module mounts in the engine bay. A single CAT-6 cable connects both. No wires cut, no factory circuits tapped. Operates on 12V DC. Entry tier in the F-150 sPOD lineup.
This kit does NOT fit the 2020 or earlier F-150 (13th Gen or prior). Confirm your model year before ordering. This system is not expandable beyond 6 circuits. If your build requires 8 circuits, order the BantamX HD or BantamX Touchscreen kit for the F-150 platform instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870088 |
| Brand | sPOD |
| Product Line | Mini6 SourceLT Kit |
| Platform | 2021–2026 Ford F-150 and F-150 Raptor — 14th Generation |
| Number of Circuits | 6 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| Operating Voltage | 12V DC only — does NOT operate on 24V |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Override | Optional override available |
| Expandability | Not expandable — closed 6-circuit system |
| Terminal Block | 12-position terminal block |
| Controller Cable | 10 ft CAT-6 Ethernet (Mini6 panel to SourceLT module) |
| CAT-6 Max Run | Up to 25 ft from SourceLT to Mini6 panel |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Mini6 Panel Mount Location | In-cab sunglass holder — vehicle-specific plate at optimized access angle |
| Mini6 Panel Dimensions | 2.0652" W x 3.0260" L x 0.375" D |
| Legend Sheet | 72 standard legends included |
| Deep Sleep Mode | Auto-deactivates after 6 hours of inactivity |
| Mounting | Vehicle-specific plate — replaces sunglass holder; no drilling, no modifications |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Mini6 Switch Panel Features
| Feature | Detail |
|---|---|
| Switch Count | 6 silicone-button switches |
| Switch Type | Soft silicone buttons with positive tactile feedback |
| Backlight | Adjustable brightness level |
| Circuit ON Indicator | Individual visual feedback light per switch |
| Programmable Modes | Momentary / Latch (per switch) |
| App-Controlled Functions | Dimming, Strobe, Flash, Momentary, Switch Linking, On-Road / Off-Road modes |
| Mount Position | Sunglass holder — vehicle-specific mounting plate at optimized angle |
Kit Contents
- sPOD SourceLT solid-state module (6-circuit)
- Mini6 switch panel
- 10-ft CAT-6 Ethernet controller cable
- Vehicle-specific sunglass holder mounting plate
- Battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- Legend sheet (72 standard legends)
- All required installation hardware
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Ford F-150 (14th Gen) — all trims | 2021–2026 | ✓ |
| Ford F-150 Raptor | 2021–2026 | ✓ |
| Ford F-150 Raptor 37 | 2024–2026 | ✓ |
| Ford F-150 Raptor R | 2024–2026 | ✓ |
| Ford F-150 (13th Gen) | 2018–2020 | ✗ Different platform — does not fit |
| Ford F-150 (12th Gen or earlier) | 2020 and earlier | ✗ Does not fit |
F-150 sPOD System Selector
| System | Circuits | Interface | Voltage | Expandable | vs. 870088 |
|---|---|---|---|---|---|
| Mini6 SourceLT — 870088 (this listing) | 6 | Physical Mini6 panel — sunglass holder | 12V DC only | No | — |
| BantamX HD | 8 | Physical HD panel — RGB | 12V or 24V | Yes — to 32 | Higher |
| BantamX Touchscreen | 8 | In-cab touchscreen | 12V or 24V | Yes — to 32 | Higher |
Choose the Mini6 SourceLT if your build is at 6 accessories or fewer with no plans to expand. Choose a BantamX system if you need 8 circuits, plan to grow, or want 24V compatibility. The Mini6 SourceLT has no upgrade path — replacing the module later costs more than stepping up now.
Critical Compatibility — Does NOT Fit
FITMENT: 14th gen F-150 only. 2020 and earlier does not fit. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2020 and earlier Ford F-150 (13th Gen or prior) | Different platform architecture. This kit does not fit. |
| Ford F-250 / F-350 Super Duty | Different platform. Order the Super Duty-specific sPOD kit instead. |
| Ford Ranger — all generations | Different platform. Not compatible with this SKU. |
| Ford Maverick — all generations | Different platform. Not compatible with this SKU. |
| Builds requiring more than 6 circuits | Mini6 SourceLT is a closed 6-circuit system. Order the BantamX HD or BantamX Touchscreen kit for the F-150 platform. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Common Questions
How do I confirm I have a 14th gen F-150 and not a 13th gen? The 14th generation F-150 launched for the 2021 model year with a redesigned front end and interior, including an available PowerBoost hybrid and Max Recline seats. If your F-150 is a 2020 or earlier, it is a 13th gen and this kit does not fit. Confirm your model year on your window sticker, door jamb, or title before ordering.
Where exactly does the Mini6 panel mount in the F-150? The vehicle-specific mounting plate replaces the in-cab sunglass holder in the overhead console — same position used across sPOD's F-150, Tundra, and Tacoma kits. The plate is designed at the optimal angle for switch access from the driver or passenger position. No drilling, no modifications to the interior required.
Does installation require cutting factory wires or tapping into the F-150 harness? No. The SourceLT module connects directly to the battery via the included cable set. A single CAT-6 cable runs from the engine bay module to the sunglass holder Mini6 panel. No factory circuits are tapped, no wires are cut.
Can I upgrade to 8 circuits later without replacing the module? No. The Mini6 SourceLT is a closed 6-circuit system with no expansion path. If there is any chance you need more circuits, order the BantamX HD or BantamX Touchscreen for the F-150 platform now. Replacing the module later costs more than the price difference today.
Does this fit the F-150 Raptor R (supercharged V8)? Yes. The Raptor R uses the same 14th gen F-150 platform with the same sunglass holder interior architecture. This kit fits all F-150 Raptor variants including the Raptor 37 and Raptor R.
What does installation actually take — time, tools, and skill level? Intermediate DIY level. Vehicle-specific mounting hardware eliminates custom fabrication. Plan for 2–3 hours. Sunglass holder removal requires basic trim tools. Battery terminal connections require basic hand tools. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The Mini6 SourceLT (870088) is for the 2021–2026 F-150 or Raptor owner who wants 6 circuits of clean, fuse-free accessory power behind a compact sunglass holder panel that looks like it came from the factory — entry tier, lowest price point in the F-150 sPOD lineup, no relay box, one cable into the cab.
The only question to answer honestly before ordering is whether 6 circuits is your ceiling. Map your full accessory list — ditch lights, chase bar, compressor, winch controller, auxiliary lighting. If you are already at 5 accessories or close to it, step up to the BantamX now. The Mini6 SourceLT has no upgrade path.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.