sPOD Mini6 SourceLT Kit | 6-Circuit Power Management | 2024-2026 Toyota Tacoma 4th Gen | SKU 870038
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD Mini6 SourceLT Kit (SKU 870038) is the vehicle-specific 6-circuit solid-state power management system engineered for the 2024–2026 Toyota Tacoma (4th Generation). It integrates the sPOD Mini6 physical switch panel directly into the Tacoma's interior architecture for accessible, in-cab accessory control — through current-sensing MOSFET technology with no fuses, no relays, and a single CAT-6 cable between the module and panel. Operates on 12V DC. Entry tier in the sPOD 4th gen Tacoma lineup.
This kit does NOT fit the 3rd Generation Tacoma (2016–2023). Confirm your model year before ordering. This system is not expandable beyond 6 circuits. If your build requires 8 circuits, order the HD BantamX or BantamX Touchscreen kit for the 4th gen Tacoma instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870038 |
| Brand | sPOD |
| Product Line | Mini6 SourceLT Kit |
| Platform | 2024–2026 Toyota Tacoma — 4th Generation only — all trims |
| Number of Circuits | 6 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC only — does NOT operate on 24V |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Override | Optional override available |
| Expandability | Not expandable — closed 6-circuit system |
| Terminal Block | 12-position terminal block |
| Controller Cable | 10 ft CAT-6 Ethernet (Mini6 panel to SourceLT module) |
| CAT-6 Max Run | Up to 25 ft from SourceLT to Mini6 panel |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid — vehicle-specific length |
| Mounting | Vehicle-specific hardware included — all Tacoma 4th gen trims |
| Dimensions | 12.0 x 10.0 x 10.0 inches |
| Shipping Weight | 6.5 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Mini6 Switch Panel Features
| Feature | Detail |
|---|---|
| Switch Count | 6 silicone-button switches |
| Programmable Modes | Momentary / Latch (per switch) |
| Backlight | Adjustable brightness level |
| Circuit ON Indicator | Individual visual feedback light per switch |
| Legend Sheet | 72 standard legends included |
| Deep Sleep Mode | Auto-deactivates after 6 hours of inactivity |
| Panel Dimensions | 2.062" W x 3.260" L x 0.375" D |
| App-Controlled Functions | Dimming, Strobe, Flash, Momentary, Switch Linking, On-Road / Off-Road modes |
| CAT-6 Connection | Up to 25 ft from SourceLT module |
Kit Contents
- sPOD SourceLT solid-state module (6-circuit)
- Mini6 switch panel
- Vehicle-specific battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- 10-ft CAT-6 Ethernet controller cable
- Vehicle-specific mounting bracket
- All required installation hardware
sPOD 4th Gen Tacoma Power Management Lineup
| System | Circuits | Interface | Voltage | Expandable | vs. This Kit |
|---|---|---|---|---|---|
| Mini6 SourceLT (870038 — this listing) | 6 | Physical Mini6 panel | 12V DC only | No | — |
| BantamX Touchscreen | 8 | In-cab touchscreen | 12V or 24V | Yes — to 32 | Higher |
| HD BantamX | 8 | Physical HD panel — RGB | 12V or 24V | Yes — to 32 | Higher |
Choose the Mini6 SourceLT if your build is at 6 accessories or fewer with no plans to expand. Choose the BantamX Touchscreen if you want an in-cab screen that matches the Tacoma's LCD display aesthetic. Choose the HD BantamX if you want tactile physical switches operable by feel on trail. Both BantamX systems are expandable to 32 channels — the Mini6 SourceLT is not.
Critical Compatibility — Does NOT Fit
FITMENT: Built for the 2024–2026 Toyota Tacoma 4th Generation only. The 4th gen Tacoma launched in 2024 — do not order for a 2023 or earlier Tacoma. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2016–2023 Toyota Tacoma (3rd Gen) | Different platform, interior architecture, and mounting geometry. This kit does not fit. |
| 2023 Toyota Tacoma | The 4th gen launched in 2024. A 2023 Tacoma is a 3rd gen — this kit does not fit. |
| 2005–2015 Toyota Tacoma (2nd Gen) | Different platform. This kit does not fit. |
| Toyota 4Runner — all generations | Different platform. Not compatible with this SKU. |
| Toyota Tundra — all generations | Different platform. Not compatible with this SKU. |
| Builds requiring more than 6 circuits | Mini6 SourceLT is a closed 6-circuit system. Order the HD BantamX or BantamX Touchscreen kit for the 4th gen Tacoma instead. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Common Questions
How do I confirm I have a 4th gen Tacoma and not a 3rd gen? The 4th generation Tacoma launched for the 2024 model year. If your Tacoma is a 2023 or earlier, it is a 3rd gen and this kit does not fit. Confirm your model year on your window sticker, door jamb, or title before ordering.
Does the Mini6 panel integrate with the Tacoma's factory switch bank? The kit includes vehicle-specific mounting hardware that integrates with the 4th gen Tacoma's interior architecture across all trim levels. Factory switch bank layout may vary by trim — SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Limited, and Trailhunter each have different factory switch configurations. Verify your trim's interior panel layout before installation. Text (469) 407-7538 with pre-install questions.
What is the difference between this and the BantamX systems for the same platform? Three differences. Circuits: Mini6 SourceLT gives you 6, BantamX gives you 8. Expandability: Mini6 SourceLT is a closed system. BantamX is expandable to 32 channels. Voltage: Mini6 SourceLT runs 12V DC only. BantamX runs 12V or 24V DC. If 6 circuits is genuinely your ceiling, the Mini6 SourceLT is the right call. If there is any chance you add accessories, the BantamX is the better foundation. The BantamX Touchscreen is specifically noted to match the Tacoma's in-cabin LCD display aesthetic — relevant if cab integration matters to you.
Does installation require cutting factory wires or tapping into the Tacoma harness? No. The SourceLT module connects directly to the battery via the included vehicle-specific cable set. A single CAT-6 cable runs from the module to the Mini6 panel in the cab. No factory circuits are tapped, no wires are cut.
Can I upgrade to 8 circuits later without replacing the module? No. The Mini6 SourceLT is a closed 6-circuit system with no expansion ports. If there is any chance you need 8 circuits, order a BantamX kit now. Upgrading later means replacing the entire module.
What does installation actually take — time, tools, and skill level? Intermediate DIY level. The vehicle-specific mounting hardware eliminates custom fabrication. Plan for 2–3 hours for a clean finished install. Basic hand tools handle battery terminal connections. Interior panel removal for Mini6 panel mounting may require trim tools and varies by trim level. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The Mini6 SourceLT (870038) is for the 4th gen Tacoma owner who wants clean, vehicle-specific accessory power management for up to 6 accessories without paying for BantamX capacity they will never use. Physical Mini6 panel in the cab. No fuses to pull. No relay bank under the hood. Factory-style integration across all 4th gen trims.
The only question to answer honestly before ordering is whether 6 circuits is actually your ceiling. Map every accessory you are running and every one you plan to add. If you are already close to that number, order a BantamX kit now. The Mini6 SourceLT has no upgrade path — replacing it later costs more than buying up front.
Six circuits. One cable into the cab. Vehicle-specific fit. If that covers your build, this is all you need.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Battery cable length for this vehicle-specific kit should be verified against sPOD's current product documentation before installation. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.