sPOD Mini6 SourceLT Kit | 6-Circuit Power Management | 2025-2026 Toyota 4Runner 6th Gen | SKU 87-0043
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD Mini6 SourceLT Kit (SKU 87-0043) is the vehicle-specific 6-circuit solid-state power management system engineered for the 2025–2026 Toyota 4Runner (6th Generation). It integrates the sPOD Mini6 physical switch panel directly into the 4Runner's interior architecture for accessible, in-cab accessory control — through current-sensing MOSFET technology with no fuses, no relays, and a single CAT-6 cable between the module and panel. Operates on 12V DC. Entry tier in the sPOD 4Runner lineup at $270 less than the BantamX systems.
This kit does NOT fit the 5th Generation 4Runner (2010–2024). Confirm your model year before ordering. This system is not expandable beyond 6 circuits. If your build requires 8 circuits now or in the future, order the BantamX Touchscreen (87-0042) or HD BantamX (87-0041) instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 87-0043 |
| Brand | sPOD |
| Product Line | Mini6 SourceLT Kit |
| Platform | 2025–2026 Toyota 4Runner — 6th Generation only |
| Number of Circuits | 6 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC only — does NOT operate on 24V |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Override | Optional override available |
| Expandability | Not expandable — closed 6-circuit system |
| Terminal Block | 12-position terminal block |
| Controller Cable | 10 ft CAT-6 Ethernet (Mini6 panel to SourceLT module) |
| CAT-6 Max Run | Up to 25 ft from SourceLT to Mini6 panel |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Battery Cable Length | 36 inches — vehicle-specific for 6th-gen 4Runner engine bay |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Mounting | Vehicle-specific hardware included — integrates with 6th-gen 4Runner interior |
| Dimensions | 12.0 x 10.0 x 10.0 inches |
| Shipping Weight | 6.5 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Mini6 Switch Panel Features
| Feature | Detail |
|---|---|
| Switch Count | 6 silicone-button switches |
| Programmable Modes | Momentary / Latch (per switch) |
| Backlight | Adjustable brightness level |
| Circuit ON Indicator | Individual visual feedback light per switch |
| Legend Sheet | 72 standard legends included |
| Deep Sleep Mode | Auto-deactivates after 6 hours of inactivity |
| Panel Dimensions | 2.062" W x 3.260" L x 0.375" D |
| App-Controlled Functions | Dimming, Strobe, Flash, Momentary, Switch Linking, On-Road / Off-Road modes |
| CAT-6 Connection | Up to 25 ft from SourceLT module |
Kit Contents
- sPOD SourceLT solid-state module (6-circuit)
- Mini6 switch panel
- 36-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- 10-ft CAT-6 Ethernet controller cable
- Vehicle-specific mounting bracket
- All required installation hardware
sPOD 6th Gen 4Runner Power Management Lineup
| SKU | System | Circuits | Interface | Voltage | Expandable | Price |
|---|---|---|---|---|---|---|
| 87-0043 (this listing) | Mini6 SourceLT | 6 | Physical Mini6 panel | 12V DC only | No | — |
| 87-0042 | BantamX Touchscreen | 8 | In-cab touchscreen | 12V or 24V | Yes — to 32 | +$270 |
| 87-0041 | HD BantamX | 8 | Physical HD panel — RGB | 12V or 24V | Yes — to 32 | +$295 |
Choose the Mini6 SourceLT if your build is at 6 accessories or fewer with no plans to expand. Choose a BantamX system if you need 8 circuits, plan to grow, or want 24V compatibility. The SourceLT is a closed system — there is no upgrade path to 8 circuits without replacing the module entirely.
Critical Compatibility — Does NOT Fit
FITMENT: Built for the 2025–2026 Toyota 4Runner 6th Generation only. The 6th gen launched in 2025 — do not order for a 2024 or earlier 4Runner. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2010–2024 Toyota 4Runner (5th Gen) | Different platform, interior architecture, and mounting geometry. This kit does not fit. |
| 2024 Toyota 4Runner | The 6th gen launched in 2025. A 2024 4Runner is a 5th gen — this kit does not fit. |
| Toyota Tacoma — all generations | Different platform. Not compatible with this SKU. |
| Toyota Tundra — all generations | Different platform. Not compatible with this SKU. |
| Toyota Land Cruiser, Sequoia, or other Toyota platforms | Not confirmed. Verify before ordering. |
| Builds requiring more than 6 circuits | Mini6 SourceLT is a closed 6-circuit system. Order BantamX Touchscreen (87-0042) or HD BantamX (87-0041) for 8 expandable circuits. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Common Questions
How do I confirm I have a 6th gen 4Runner and not a 5th gen? The 6th generation 4Runner launched for the 2025 model year. If your 4Runner is a 2024 or earlier, it is a 5th gen and this kit does not fit. Confirm your model year on your window sticker, door jamb, or title before ordering.
Why is the battery cable only 36 inches when BantamX kits use 84 inches? The 36-inch cable set is vehicle-specific for the 6th gen 4Runner's engine bay layout — the SourceLT module mounts close to the battery in this application, making the shorter cable the correct fit. Do not substitute a longer universal cable set without confirming routing clearance in your specific install.
What is the real difference between this and the BantamX systems for the same platform? Three meaningful differences. Circuits: Mini6 SourceLT gives you 6, BantamX gives you 8. Expandability: Mini6 SourceLT is a closed system with no expansion path. BantamX is expandable to 32 channels. Voltage: Mini6 SourceLT operates on 12V DC only. BantamX operates on 12V or 24V DC. The Mini6 SourceLT saves $270–$295 versus the BantamX systems. If 6 circuits is genuinely your ceiling, that savings is real. If there is any chance you add accessories later, the BantamX is the better foundation.
Does installation require cutting factory wires or tapping into the 4Runner harness? No. The SourceLT module connects directly to the battery via the included 36-inch cable set. A single CAT-6 cable runs from the module to the Mini6 panel in the cab. No factory circuits are tapped, no wires are cut.
What does installation actually take — time, tools, and skill level? Intermediate DIY level. The vehicle-specific mounting hardware eliminates custom fabrication. Plan for 2–3 hours for a clean finished install. Basic hand tools handle battery terminal connections. Interior panel removal for Mini6 panel mounting may require trim tools and varies by trim level. If you are not comfortable with interior panel work or battery terminal connections, have a qualified automotive electrician complete the installation. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The Mini6 SourceLT (87-0043) is for the 6th gen 4Runner owner who wants clean, vehicle-specific accessory power management for up to 6 accessories — physical switch panel in the cab, no fuses, no relay bank, factory-style integration — without paying for BantamX capacity they will never use.
The one question to answer before ordering is whether 6 circuits is actually your ceiling. Map your accessories before you commit. If you are already at 5 and have a compressor, light bar, or locker controller still on the list, spend the extra $270 and order the BantamX now. The Mini6 SourceLT has no upgrade path — replacing it later costs more than buying up front.
Six circuits. One cable into the cab. Vehicle-specific fit. $270 less than the BantamX. If that covers your build, this is all you need.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.