sPOD HD BantamX Kit | 8-Circuit Physical Switch Panel | 2021-2026 Ford F-150 & F-150 Raptor | SKU 870087
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD HD BantamX Kit (SKU 870087) is the vehicle-specific 8-circuit solid-state power management system for the 2021–2026 Ford F-150 and F-150 Raptor (14th Generation). The HD switch panel integrates directly into the F-150's in-cab sunglass holder via a vehicle-specific mounting plate — physical tactile switches with adjustable RGB backlight, operable by feel in the dark without visual reference. The BantamX module mounts in the engine bay. A single CAT-6 Ethernet cable connects both. No wires cut, no factory circuits tapped. Expandable to 32 channels. Operates on 12V or 24V DC.
This kit does NOT fit the 2020 or earlier F-150. Confirm your model year before ordering.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870087 |
| Brand | sPOD |
| Product Line | HD BantamX Vehicle Kit |
| Platform | 2021–2026 Ford F-150 and F-150 Raptor — 14th Generation |
| Number of Circuits | 8 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Expandability | 2 controller ports (RJ45) — expandable to 32 channels via BantamX add-on |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Controller Cable | 10 ft CAT-6 Ethernet (HD panel to BantamX module) — extendable to 25 ft |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| HD Panel Backlight | Adjustable RGB — customizable color to match F-150 interior dash lighting |
| Panel Lock-Out | Panel lock-out feature available |
| HD Panel Mount Location | In-cab sunglass holder — vehicle-specific plate at optimized access angle |
| HD Panel Dimensions | 2-7/8" W x 4-7/8" L x 1/2" thick |
| Mounting | Vehicle-specific plate — replaces sunglass holder; no drilling, no modifications |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
HD Switch Panel Features
| Feature | Detail |
|---|---|
| Switch Count | 8 silicone-button switches |
| Switch Type | Tactile — positive touch feedback, operable by feel without visual reference |
| Backlight | Adjustable RGB — any color, any intensity to match dash lighting |
| Backlight Auto-Off | Adjustable timer — reactivates on any switch touch |
| Backlight Quick Off | Hold 2 designated buttons to instantly turn backlight off |
| Circuit ON Indicator | Individual backlit feedback per switch |
| Programmable Modes | Dimming, Strobe, Flash, Momentary, Switch Linking, Memory, Auto Power-Up |
| Panel Lock-Out | Yes — prevents accidental circuit activation |
| App Integration | Full sPOD app programmability via Bluetooth in parallel |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- HD switch panel with adjustable RGB backlight
- 10-ft CAT-6 Ethernet controller cable
- Vehicle-specific sunglass holder mounting plate
- Battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- All required installation hardware
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Ford F-150 (14th Gen) — all trims | 2021–2026 | ✓ |
| Ford F-150 Raptor | 2021–2026 | ✓ |
| Ford F-150 Raptor 37 | 2024–2026 | ✓ |
| Ford F-150 Raptor R | 2024–2026 | ✓ |
| Ford F-150 (13th Gen) | 2018–2020 | ✗ Different platform — does not fit |
| Ford F-150 (12th Gen or earlier) | 2020 and earlier | ✗ Does not fit |
F-150 sPOD System Selector
| SKU | System | Circuits | Interface | Voltage | Expandable | Price |
|---|---|---|---|---|---|---|
| 870088 | Mini6 SourceLT | 6 | Physical Mini6 panel — sunglass holder | 12V DC only | No | Less |
| 870087 (this listing) | HD BantamX | 8 | Physical HD panel — RGB — sunglass holder | 12V or 24V | Yes — to 32 | — |
| 870086 | BantamX Touchscreen | 8 | In-cab touchscreen — sunglass holder | 12V or 24V | Yes — to 32 | Confirm |
All three kits mount in the same sunglass holder position. HD panel vs. touchscreen: same BantamX module, same 8 circuits, same expandability. The HD panel gives you tactile switches operable by feel in the dark — right for a dedicated off-road or work build. The touchscreen gives you customizable labeled circuit names and real-time monitoring — right for a daily driver or evolving build. Mini6 SourceLT saves money with 6 circuits and no expansion path.
Critical Compatibility — Does NOT Fit
FITMENT: 14th gen F-150 only. 2020 and earlier does not fit. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2020 and earlier Ford F-150 (13th Gen or prior) | Different platform architecture. This kit does not fit. |
| Ford F-250 / F-350 Super Duty | Different platform. Order the Super Duty-specific sPOD kit. |
| Ford Ranger — all generations | Different platform. Not compatible with this SKU. |
| Ford Maverick — all generations | Different platform. Not compatible with this SKU. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Common Questions
How do I confirm I have a 14th gen F-150? The 14th generation F-150 launched for the 2021 model year. If your F-150 is a 2020 or earlier, it is a 13th gen and this kit does not fit. Confirm your model year on your window sticker, door jamb, or title before ordering.
Where exactly does the HD panel mount in the F-150? The vehicle-specific mounting plate replaces the in-cab sunglass holder in the overhead console — same position as the Mini6 and Touchscreen kits. The plate is designed at the optimal angle for switch access from the driver or passenger position. No drilling, no modifications to the interior required.
HD panel vs. touchscreen — which is right for my F-150 build? Same BantamX module, same 8 circuits, same sunglass holder position. The HD panel gives you tactile switches you can hit by feel at night without looking at the panel — better for a dedicated trail rig, race truck, or work build. The touchscreen gives you customizable labeled circuit names and real-time monitoring — better when your accessory list changes or you want visual system status. Choose based on how you actually operate the truck.
Can the RGB backlight match my F-150's interior lighting? Yes. The HD panel backlight is fully adjustable in color and intensity — dial it in to match your F-150's ambient interior dash lighting or set it to any color preference.
Does installation require cutting factory wires or tapping into the F-150 harness? No. The BantamX module connects directly to the battery via the included cable set. A single CAT-6 cable runs from the engine bay module to the sunglass holder HD panel. No factory circuits are tapped, no wires are cut.
Can I expand beyond 8 circuits later? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels via the sPOD BantamX add-on system.
Does this fit the Raptor R? Yes. The Raptor R uses the same 14th gen F-150 platform with the same sunglass holder interior architecture.
What does installation actually take — time, tools, and skill level? Intermediate to advanced DIY level. Vehicle-specific mounting hardware eliminates custom fabrication. Plan for 2–3 hours. Sunglass holder removal requires basic trim tools. Battery terminal connections require basic hand tools. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The HD BantamX Kit (870087) is for the 2021–2026 F-150 or Raptor owner who wants 8 circuits of clean, fuse-free accessory power behind physical switches they can operate by feel — no touchscreen, no app required in the moment, no looking away from the trail. The RGB backlight matches the cab. The sunglass holder integration looks factory. The BantamX module grows with the build to 32 channels.
If a configurable labeled touchscreen matters more than tactile switch access, look at the Touchscreen BantamX (870086) for the same platform. If 6 circuits covers the build, the Mini6 SourceLT (870088) saves money. If this F-150 is a serious build — ditch lights, chase bar, compressor, winch controller — the HD panel is the right call.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.