sPOD HD BantamX Kit | 8-Circuit Physical Switch Panel | 2025-2026 Toyota 4Runner 6th Gen | SKU 87-0041

The sPOD HD BantamX Kit (SKU 87-0041) is the vehicle-specific 8-circuit solid-state power management system engineered for the 2025–2026 Toyota 4Runner (6th Generation). It integrates an HD physical switch panel directly into the 4Runner's interior architecture for tactile, eyes-free accessory control — through current-sensing MOSFET technology with no fuses, no relays, and a single Ethernet cable between the module and panel. Adjustable RGB backlight matches your cab's aesthetic. Expandable to 32 channels. Operates on 12V or 24V DC.

This kit does NOT fit the 5th Generation 4Runner (2010–2024). Confirm your model year before ordering.

Component Specifications

HD Switch Panel Features

Kit Contents

• sPOD BantamX solid-state module (8-circuit, expandable)
• HD switch panel with adjustable RGB backlight
• 84-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
• Single Ethernet cable (module to HD panel)
• Vehicle-specific mounting hardware
• All required installation hardware

sPOD 6th Gen 4Runner Power Management Lineup

HD BantamX vs. BantamX Touchscreen: same 8-circuit BantamX module, same expandability, $25 price difference. The HD panel gives you tactile physical switches operable by feel in low-light and off-road conditions. The Touchscreen gives you an in-cab screen interface. Choose based on how you operate the vehicle — physical switches for serious trail use, touchscreen for a daily driver that occasionally sees dirt.

Critical Compatibility — Does NOT Fit

FITMENT: This SKU is built for the 2025–2026 Toyota 4Runner 6th Generation only. The 6th gen launched in 2025 — do not order for a 2024 or earlier 4Runner. Questions? Text (469) 407-7538.

Common Questions

How do I confirm I have a 6th gen 4Runner and not a 5th gen? The 6th generation 4Runner launched for the 2025 model year. If your 4Runner is a 2024 or earlier, it is a 5th gen and this kit does not fit. Confirm your model year on your window sticker, door jamb, or title before ordering.

HD panel vs. touchscreen — which is right for my build? Both run the same 8-circuit BantamX module at nearly identical price points. The HD panel gives you tactile physical switches you can hit by feel in the dark without taking eyes off the trail. The touchscreen gives you a clean in-cab screen interface that works well for daily driving and occasional off-road use. If your 4Runner is a dedicated trail build, the HD panel is the right call. If it is primarily a daily driver, the touchscreen at $25 less is a reasonable choice.

Does installation require cutting factory wires or tapping into the 4Runner harness? No. The BantamX module connects directly to the battery via the included 84-inch cable set. A single Ethernet cable runs from the module to the HD switch panel. No factory circuits are tapped, no wires are cut.

Can I expand beyond 8 circuits later? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels via the sPOD BantamX add-on system.

Does switch panel mounting vary by trim? Potentially. The 6th gen 4Runner interior panel configurations may vary between SR5, TRD Sport, TRD Off-Road, TRD Pro, Trailhunter, Limited, and Platinum trims. Verify your specific trim's interior panel configuration before installation. Text (469) 407-7538 with pre-install questions.

What does installation actually take — time, tools, and skill level? Intermediate to advanced DIY level. The vehicle-specific mounting hardware eliminates custom fabrication. Plan for 2–3 hours for a clean finished install. Battery terminal connections require basic hand tools. Interior panel removal for switch panel mounting may require trim tools and varies by trim level. If you are not comfortable with interior panel work or battery terminal connections, have a qualified automotive electrician complete the installation. Text (469) 407-7538 with pre-install questions.

The Obsidian Take

The HD BantamX (87-0041) is for the 6th gen 4Runner owner who wants 8 circuits of clean, fuse-free accessory power controlled from physical switches they can operate by feel — no screen, no app, no looking away from the trail. The RGB backlight matches the cab aesthetic. The vehicle-specific hardware means no fabrication. The BantamX module grows with the build to 32 channels.

If touchscreen control is more useful than tactile switches for how you actually use the 4Runner, save $25 and order the BantamX Touchscreen (87-0042) — same module, same capacity. If 6 circuits covers your build, the Mini6 SourceLT (87-0043) saves $295.

Physical switches you can hit without looking. Eight circuits. One cable into the cab. That is what this kit is.

Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.

Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your vehicle's window sticker, door jamb label, or VIN decoder before ordering. Manufacturer specifications are subject to change without notice.