sPOD Ethernet Control Cable | 30-Foot | BantamX SourceLT Mini6 Mini4 | SKU 910020

SKU: 910020
In stock
Available to order — same-day processing before 12 PM CST
Regular price $60.95
Confirm Fitment With Confidence

Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.

Shipping & Delivery

Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.

Fitment, Shipping & Product Support

The sPOD Ethernet Control Cable (SKU 910020) is the 30-foot maximum-reach cable in the sPOD lineup — for builds where 25 feet falls short. Compatible with BantamX, SourceLT, Mini6, and Mini4 systems. Use for trailer runs, full-length van builds, cab-to-bed-to-cargo routing, or any custom electrical layout where the module and switch interface are separated by more than 25 feet. Cable only — power module and switch panel not included.

Before ordering: sPOD documents a 25-foot system maximum in most technical resources. This 30-foot cable is a listed sPOD catalog product — confirm your specific system and firmware version support a 30-foot run before ordering. Text (469) 407-7538 if you need help confirming.


Specifications

Spec Detail
SKU / Part Number 910020
Brand sPOD
Type Ethernet control cable
Cable Length 30 feet — maximum-reach option in sPOD cable lineup
Cable Type Standard CAT-6 Ethernet — RJ45 connectors
Compatible Systems BantamX, SourceLT, Mini6, Mini4
System Run Note sPOD documents 25-ft system maximum — confirm 30-ft compatibility before ordering
Weather Resistance Weather-resistant construction
Weight 1.0 lb
Warranty 5-year manufacturer warranty
Sold As Each — cable only

What Is and Is NOT Included

Item Included
30-foot Ethernet control cable ✓
Switch panel (HD, Mini6, Mini4, or touchscreen) ✗ NOT included
Power module (BantamX or SourceLT) ✗ NOT included

sPOD Ethernet Cable Lineup — Choose Your Length

SKU Length Best For Price
910010 1 foot Co-located module and switch interface within 1 foot $7.00
910000 10 feet Standard in-cab routing — most under-dash and firewall-to-dash paths $29.00
910005 15 feet Extended routing — complex firewall runs, rear control interfaces $35.00
910015 25 feet Long-distance routing — full-size trucks, vans, overland rigs $45.00
910020 (this listing) 30 feet Maximum-reach routing — trailers, full-length van builds, extreme layouts $59.95

Order the shortest cable that covers your routing path. Excess cable at 30 feet in a high-vibration environment requires deliberate management — do not order this cable if a shorter option covers your path.


When You Need This Cable

Situation Notes
Trailer build — module at tongue, switch interface at rear Full trailer length often exceeds 25 feet
Full-length van or Sprinter build with front module and rear control panel Extended routing through ceiling channels or floor runs
Cab-to-bed-to-cargo routing on full-size truck Multi-section routing through B-pillar, behind seat, and into bed or cargo area
Custom build where module placement cannot reduce run below 25 feet Last resort — reconsider placement before ordering
Existing 30-foot cable is damaged Direct replacement

Critical Compatibility

Configuration Notes
sPOD BantamX — all variants Compatible — confirm 30-ft run with sPOD before ordering
sPOD SourceLT — all variants Compatible — confirm 30-ft run with sPOD before ordering
sPOD Mini6 interface Compatible
sPOD Mini4 interface Compatible
sPOD HD switch panel Compatible
sPOD touchscreen Compatible
Non-sPOD power management systems Not confirmed — designed for sPOD RJ45 CAT-6 controller interface
Routing path under 25 feet Order a shorter cable — excess at this length creates unnecessary management complexity

Common Questions

sPOD's documentation says 25-foot system maximum. Why does a 30-foot cable exist? sPOD lists the 30-foot cable as a catalog product. The documented maximum in most sPOD technical resources is 25 feet. Before ordering, confirm with sPOD that your specific system and firmware version support a 30-foot run without signal degradation or system faults. Text (469) 407-7538 to confirm before you commit.

Do I need to do anything special to route 30 feet of cable? Yes. Secure the cable at 12–18 inch intervals along the entire run. Protect all chassis crossing points with split loom or conduit. Route away from heat sources, sharp edges, and moving components. Plan the full path before pulling the cable — rerouting after installation is significantly more difficult.

Can I use a standard 30-foot CAT-6 patch cable? The RJ45 CAT-6 spec is standard but the sPOD cable uses reinforced weather-resistant construction rated for vibration, temperature swing, and moisture in off-road environments. A commercial patch cable will fail prematurely under those conditions.


The Obsidian Take

The 910020 is for serious builds — trailers, full-length van conversions, cab-to-bed-to-cargo layouts — where 25 feet genuinely does not cover the routing path. Confirm system compatibility before ordering, plan your cable management from end to end, and secure every foot of the run. At this length an unsecured cable is a future failure point on trail.

If 25 feet covers your path, order the 910015 and save $15.


Manufacturer Data Disclaimer: Specifications sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. The sPOD system's documented maximum cable run is 25 feet — verify 30-foot compatibility with sPOD for your specific system before ordering. Manufacturer specifications are subject to change without notice.