sPOD BantamX Upfitter Kit | Factory Switch Integration + 5 Extra Channels | 2024-2026 Toyota Tacoma 4th Gen | SKU 910008
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD BantamX Upfitter Kit (SKU 910008) is the vehicle-specific power management system for the 2024–2026 Toyota Tacoma (4th Generation) equipped with factory upfitter switches. It connects directly to the Tacoma's factory upfitter switch bank, upgrades the OEM switch amp rating to a consistent 30A per channel, and adds 5 additional channels beyond the factory switch count — for 8 total circuits at 30A each. No controller cable runs through the firewall. No separate switch panel required. Bluetooth control via the sPOD app in parallel with the factory switches.
This kit requires factory upfitter switches. If your Tacoma does not have the factory upfitter switch bank, order a standalone sPOD system instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 910008 |
| Brand | sPOD |
| Product Line | BantamX Upfitter Vehicle Kit |
| Platform | 2024–2026 Toyota Tacoma — 4th Generation — trims with factory upfitter switch bank |
| Integration | Factory upfitter switch bank — OEM switches trigger BantamX circuits |
| Number of Circuits | 8 total — 3 OEM upfitter channels upgraded + 5 additional sPOD channels |
| Single Circuit Capacity | 30A at 12.5V DC — upgraded from OEM amp rating |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Expandability | 2 controller ports (RJ45) — expandable to 32 channels via BantamX add-on |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Firewall Cable Run | Not required — factory switches eliminate cab wiring run |
| Battery Cable Length | 84 inches |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Mounting | Vehicle-specific bracket included |
| Dimensions | 12.0 x 10.0 x 10.0 inches |
| Shipping Weight | 6.5 lbs |
| Country of Origin | USA |
| Warranty | Limited lifetime warranty |
| Sold As | Complete kit |
How the Upfitter Integration Works
The 4th gen Tacoma includes a factory upfitter switch bank on select trims — typically 3 OEM switches. Those switches are designed for accessory control but are limited to low amperage in the factory configuration.
The BantamX Upfitter Kit connects the factory switches to the BantamX power module in the engine bay. Each OEM switch now triggers a BantamX MOSFET circuit rated at 30A — a significant upgrade from the factory amp rating. The kit also adds 5 additional Bluetooth-controlled channels on top of the 3 OEM channels, giving you 8 total independently switched circuits.
Because the factory switches serve as the control interface, no controller cable runs through the firewall and no separate switch panel is mounted in the cab.
| Function | Factory OEM Only | With BantamX Upfitter |
|---|---|---|
| Switch count | 3 OEM switches | 3 OEM switches + 5 app-controlled channels = 8 total |
| Amp rating per switch | Low — OEM factory rating | 30A per channel |
| Bluetooth control | None | All 8 circuits via sPOD app |
| Firewall cable run | N/A | Not required |
| Expandability | None | Up to 32 channels |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- 84-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- Vehicle-specific mounting bracket
- All required installation hardware
4th Gen Tacoma sPOD System Selector
| SKU | System | Circuits | Upfitter Required | Interface | Price |
|---|---|---|---|---|---|
| 910008 (this listing) | BantamX Upfitter | 8 | Yes — required | Factory switches + Bluetooth app | Lowest |
| 870038 | Mini6 SourceLT | 6 | No | Physical Mini6 panel | Higher |
| 870037 | BantamX Touchscreen | 8 | No | In-cab touchscreen | Higher |
| 870036 | HD BantamX | 8 | No | Physical HD panel — RGB | Higher |
The 910008 is the lowest price option in the 4th gen Tacoma sPOD lineup because it uses the factory upfitter switches as the control interface — no separate switch panel is needed. If your Tacoma does not have factory upfitter switches, order one of the standalone systems above.
Critical Compatibility — Does NOT Fit / Does NOT Work
FITMENT: Requires factory upfitter switch bank. Confirm your trim before ordering. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| 2024–2026 Tacoma trims WITHOUT factory upfitter switches | This kit requires the factory upfitter switch bank to function. Without it, the integration has no trigger source. Order 870038, 870037, or 870036 instead. |
| 2016–2023 Toyota Tacoma (3rd Gen) | Different platform and interior architecture. This kit does not fit. |
| 2005–2015 Toyota Tacoma (2nd Gen) | Different platform. This kit does not fit. |
| Toyota 4Runner — all generations | Different platform. Not compatible with this SKU. |
| Toyota Tundra — all generations | Different platform. Not compatible with this SKU. |
| Winches and high-draw recovery motors | 30A max per circuit. Winches draw 250–400A under load. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
Which 4th Gen Tacoma Trims Have Factory Upfitter Switches?
Factory upfitter switch availability on the 4th gen Tacoma varies by trim. Confirmed trims with factory upfitter switches include TRD Pro and Trailhunter. SR, SR5, TRD Sport, and TRD Off-Road availability varies by package and configuration. Limited trim availability should be verified against your specific build sheet.
Confirm your trim's upfitter switch bank on your window sticker, build sheet, or Toyota dealer portal before ordering. Do not assume — if your Tacoma does not have factory upfitter switches, order a standalone sPOD system.
Common Questions
What exactly does "upfitter switch integration" mean — what does the BantamX actually do to the factory switches? The factory upfitter switches are low-current trigger switches — they signal accessories to activate but are not rated to carry high accessory amperage directly. The BantamX Upfitter Kit uses those factory switches as triggers for the BantamX MOSFET circuits. When you flip a factory switch, it signals the BantamX module to activate that circuit at up to 30A. The accessory power comes from the battery through the BantamX — not through the factory switch. The factory switch just tells the BantamX when to turn on.
My Tacoma has 3 factory upfitter switches. Does this kit only give me 3 circuits? No. The kit integrates with the 3 OEM switches and adds 5 additional Bluetooth-controlled channels for 8 total circuits. The 5 extra channels are controlled via the sPOD app — no additional physical switches required.
Why is this kit less expensive than the other 4th gen Tacoma sPOD systems? The factory upfitter switches serve as the control interface — no separate switch panel or touchscreen is included in the kit. You are paying for the BantamX module, cable, and bracket only. The switch panel is already in your Tacoma.
Do I need to run a cable through the firewall? No. The factory upfitter switches are already wired into the vehicle's electrical system. The BantamX module connects to that wiring in the engine bay — no controller cable needs to pass through the firewall into the cab.
Does installation require cutting factory wires? No. The BantamX Upfitter Kit is a Connect and Go system — it integrates with the factory upfitter switch wiring without cutting or splicing. Confirm with your installer that the specific harness routing for your trim is correct before beginning.
What does installation actually take — time, tools, and skill level? Intermediate to advanced DIY level. Electrical integration with the factory upfitter switch wiring requires understanding of the 4th gen Tacoma's accessory switch architecture. Plan for 2–3 hours. Professional installation is recommended for the upfitter switch integration step. Text (469) 407-7538 with pre-install questions.
The Obsidian Take
The BantamX Upfitter Kit (910008) is for the 4th gen Tacoma owner who already has factory upfitter switches and wants to turn those low-current OEM triggers into 30A MOSFET-controlled circuits — plus add 5 more Bluetooth-controlled channels on top — without mounting a separate switch panel anywhere in the cab. It is the lowest price sPOD option for the 4th gen Tacoma because the factory switch panel is already there.
The one non-negotiable before ordering is confirming your trim has the factory upfitter switch bank. If it does not, order a standalone system. If it does, this kit turns three factory switches into the trigger interface for a full 8-circuit BantamX power management system without running a single wire through the firewall.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify factory upfitter switch availability for your specific trim and build configuration before ordering. Manufacturer specifications are subject to change without notice.