sPOD BantamX Touchscreen Power Management Kit — Ford F-250/F-350 Super Duty SKU: 870140

This vehicle-specific power management kit integrates the sPOD 3.5-inch digital touchscreen into the factory sunglass holder location of the 2023–2026 Ford F-250/F-350 Super Duty upper console, providing 8 circuits of 30-amp power per channel with Bluetooth app control, programmable output modes, and built-in low-voltage cutoff protection — connected by a single ethernet cable with no relays, wiring looms, or circuit fuses required.

Before ordering: This is a Built to Order product. Call for availability and lead time before placing your order. Fits 2023–2026 Ford F-250 Super Duty and F-350 Super Duty. Confirm your cab and console configuration matches this kit before ordering.

Required separately: Accessory devices and add-on circuits beyond the included 8-channel BantamX system. Additional BantamX modules required for uLINK expansion beyond 8 channels (up to 32 channels total, sold separately).

Verified Fitment

Component Specifications

What Is and Is NOT Included

Critical Compatibility

• Fits 2023–2026 Ford F-250 Super Duty and F-350 Super Duty only.
• Touchscreen is designed to replace the factory sunglass holder in the upper console. Confirm your truck's upper console includes this factory sunglass holder location before ordering.
• This is a Built to Order product — contact OFAS before ordering to confirm availability and lead time.
• Use only the included sPOD battery cables on the positive and negative terminal studs of the BantamX board. Attaching any other cable to these terminals voids the warranty.
• Connecting battery cables with reversed polarity voids the warranty.
• Do not connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post used by the BantamX system. Per manufacturer documentation, this causes irreversible damage and voids all warranties.
• Do not cut, splice, or otherwise modify the supplied wiring, connectors, or switches. Any such modification voids the warranty.
• uLINK scalability to 32 channels requires additional BantamX modules (sold separately).

Installation Notes

Professional installation is strongly recommended. A single ethernet cable connects the BantamX unit to the touchscreen in the cab — no relays, wiring looms, or circuit fuses are required. The touchscreen replaces the factory sunglass holder panel. The BantamX power control module connects to the vehicle's battery using the included cable set.

Refer to the current sPOD/Baja Designs installation instructions for this SKU (FGXX_870140-INS_001) for complete procedures, torque specifications, and all safety requirements.

The Obsidian Take

The 870140 is sPOD's touchscreen power management solution for the 2023–2026 F-250/F-350 Super Duty — 8 circuits at 30 amps each, a 3.5-inch touchscreen that drops into the factory sunglass holder location for a factory-finish appearance, and a single ethernet cable connecting it all with no relay or fuse panel required. The BantamX platform's uLINK system allows expansion to 32 total channels if the build grows, and the 2-controller-port design supports a second controller option on the same module. Built to Order means it does not ship off a shelf — call ahead to confirm availability before placing the order.

This Product Is For You If

• You own a 2023–2026 Ford F-250 or F-350 Super Duty with the factory sunglass holder in the upper console.
• You want a factory-integrated touchscreen accessory controller rather than a traditional switch panel.
• You need 8 independently controlled, 30-amp circuits with Bluetooth app programming.
• You want built-in low-voltage cutoff protection and deep sleep mode.
• You want the ability to expand to up to 32 channels through uLINK as your build grows.

This Product Is Not For You If

• Your vehicle is not a 2023–2026 Ford F-250 or F-350 Super Duty.
• Your truck's upper console does not have a factory sunglass holder in the location this kit replaces.
• You need more than 8 circuits immediately without adding additional BantamX modules.
• You plan to connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the BantamX.
• You plan to cut, splice, or modify the supplied wiring.

Common Questions

Is this product in stock?
This is a Built to Order product. Contact Obsidian Forged Auto Supply before ordering to confirm availability and lead time. Call or text 469-407-7538.

Where does the touchscreen mount?
The 3.5-inch digital touchscreen replaces the factory sunglass holder in the upper console of the 2023–2026 F-250/F-350 Super Duty. Confirm your truck has this factory location before ordering.

How many accessories can this kit control?
The BantamX provides 8 circuits, each rated at 30 amps at 12.5 VDC, for 100A total. With uLINK, the system can expand to 32 total channels by linking additional BantamX modules (sold separately).

Can I control the system from my phone?
Yes. The BantamX has built-in sPODConnect Bluetooth. The system is programmable via the sPOD app on iOS and Android devices.

What programming options are available?
Output dimming, strobing, flashing, master-slave functions, memory, auto power-up, momentary settings, switch linking, and input control automation via factory wiring integration.

Does installation require relays, fuses, or a wiring loom?
No. A single ethernet cable connects the BantamX unit to the touchscreen. No relays, wiring looms, or circuit fuses are required.

What voltage systems does this support?
The BantamX operates on 12 VDC or 24 VDC.

Can I run two controllers on the same BantamX?
Yes. The BantamX has 2 built-in controller ports, supporting 2 different controller options per system.

What is the warranty?
sPOD provides a 5-year manufacturer warranty on this product.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and installation data for this kit are sourced from sPOD/Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.

Required Legal, Warning, Fitment, and Return Notices

California Proposition 65 Warning: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.

Return Policy: Returns are accepted within 30 days of receipt. Merchandise must be returned unused, in original condition, with all printed materials and accessories enclosed. Products showing signs of installation or not in original condition may incur additional charges or may not be accepted. All returns require a Return Merchandise Authorization (RMA) number and proof of original purchase. To request an RMA, email Return@bajadesigns.com with your full name, invoice number, and part number. A 15% restocking fee applies after 30 days. Return shipping is the buyer's responsibility. Original shipping fees are non-refundable. Obsidian Forged Auto Supply strongly recommends insuring all return packages. We are not responsible for items lost or stolen in transit; liability is assumed once the return reaches the facility. Failure to follow the return process may result in delays or refusal of the returned package. These policies are subject to change without prior notice.