sPOD BantamX Touchscreen Kit | 8-Circuit In-Cab Touchscreen | 2018-2026 Jeep Wrangler JL / 2020-2026 Gladiator JT | SKU 870040
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD BantamX Touchscreen Kit (SKU 870040) is the vehicle-specific 8-circuit solid-state power management system for the 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT with a 3.5-inch TFT LCD touchscreen interface. Customizable circuit labels, real-time monitoring, dimming, strobe, and momentary programming from the touchscreen or the sPOD app. BantamX module mounts in the engine bay. Single CAT-6 cable into the cab. No wires cut, no factory circuits tapped. Expandable to 32 channels. Operates on 12V or 24V DC.
This kit does NOT fit the Jeep Wrangler Rubicon 392 V8. Diesel and 4xe variants require a special bracket — confirm before ordering. The touchscreen becomes inoperable below 20°F — allow the cab to warm before use.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870040 |
| Brand | sPOD |
| Product Line | BantamX Touchscreen Vehicle Kit |
| Platform | 2018–2026 Jeep Wrangler JL / JLU, 2020–2026 Jeep Gladiator JT — standard engines |
| Number of Circuits | 8 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Expandability | 2 controller ports (RJ45) — expandable to 32 channels via BantamX add-on |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Ignition Control | Optional ignition control and safety lockout for circuits 1 and 2 |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Controller Cable | 10 ft CAT-6 Ethernet (touchscreen to BantamX module) — extendable to 25 ft |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Touchscreen Display | 3.5-inch LED backlit TFT LCD |
| Touchscreen Resolution | 320 x 240 |
| Touchscreen Colors | 16.7 million |
| Touchscreen Viewing Angle | 180 degrees |
| Touch Technology | Resistive — pressure-activated |
| Touchscreen Weatherproof | No — interior protected mounting only |
| Cold Temperature Limit | Inoperable below 20°F — allow cab to warm before use |
| Module Housing | Powder-coated steel base with silicone gasket, aluminum lid |
| Mounting | Vehicle-specific JL/JT hardware included |
| Touchscreen Additional Mount | RAM-201U double socket arm required — sold separately |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Touchscreen Interface Features
| Feature | Detail |
|---|---|
| Screen Type | TFT LCD — resistive touchscreen (pressure-activated) |
| Circuit Control | Individual on/off per circuit via touchscreen |
| Circuit Monitoring | Real-time circuit status display |
| Circuit Naming | Customizable labels per circuit |
| Programmable Functions | Dimming, Strobe, Flash, Momentary, Memory, Switch Linking, Auto Power-Up |
| App Integration | Full sPOD app programmability via Bluetooth in parallel |
| Cold Temperature | Inoperable below 20°F — allow cab to warm before use |
| Weatherproof | No — interior protected location only |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- 3.5-inch TFT LCD touchscreen controller
- 10-ft CAT-6 Ethernet cable (touchscreen to module)
- Vehicle-specific JL/JT mounting hardware
- Battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- All required installation hardware
RAM mounting hardware sold separately: RAM-201U Double Socket Arm (required), RAM-238U Base with 1-inch RAM Ball, or RAM-224-1U Suction Cup Base.
JL/JT BantamX System Selector
| SKU | System | Interface | Expandable | Notes |
|---|---|---|---|---|
| 870025 | BantamX HD | Physical HD panel — RGB silicone buttons | Yes — to 32 | No cold weather limitation; operable by feel |
| 870040 (this listing) | BantamX Touchscreen | 3.5-inch TFT LCD | Yes — to 32 | Customizable labels; inoperable below 20°F |
| 870118 / 870119 | BantamX / SourceLT Wireless | App only | Yes | No physical panel |
| JL/JT Mini6 SourceLT | SourceLT Mini6 | Mini6 silicone buttons | No | 6-circuit ceiling |
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Jeep Wrangler JL (2-door) — standard engines | 2018–2026 | ✓ |
| Jeep Wrangler JL Unlimited (4-door) — standard engines | 2018–2026 | ✓ |
| Jeep Gladiator JT — standard engines | 2020–2026 | ✓ |
| Jeep Wrangler JL Rubicon 392 V8 | 2021–2026 | ✗ Does NOT fit |
| Jeep Wrangler JL 4xe (PHEV) | All years | ⚠️ Special bracket required — confirm before ordering |
| Jeep Wrangler JL Diesel / Gladiator JT Diesel | All years | ⚠️ Special bracket required — confirm before ordering |
| Jeep Wrangler JK / JKU | 2007–2018 | ✗ Order 870035 for JK |
| Jeep Wrangler TJ / LJ | All years | ✗ Does not fit |
Critical Compatibility — Does NOT Fit
FITMENT: JL/JT standard engines only. 392 V8 does not fit. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| Jeep Wrangler Rubicon 392 V8 | Does NOT fit — different engine bay layout. Order the 392-specific BantamX kit. |
| Jeep Wrangler JL 4xe (PHEV) | Special bracket required — text (469) 407-7538 before ordering. |
| Jeep Wrangler JL Diesel / Gladiator JT Diesel | Special bracket required — text (469) 407-7538 before ordering. |
| Jeep Wrangler JK / JKU | Different platform. Order 870035 for the JK touchscreen kit. |
| Exterior or exposed touchscreen mounting | NOT weatherproof. Water or liquid exposure voids warranty. |
| Cold climate use below 20°F without warmup | Touchscreen becomes inoperable below 20°F. Allow cab to warm before use. |
| Winches and high-draw recovery motors | 30A max per circuit. Wire winches direct to battery through a dedicated relay. |
Common Questions
Does this fit the Wrangler Rubicon 392? No. The Rubicon 392 V8 has a different engine bay layout and this kit will not install correctly. A dedicated sPOD BantamX kit exists specifically for the 392.
I have a 4xe or diesel — does this kit fit? With a special bracket. The standard 870040 hardware does not accommodate the 4xe or diesel engine bay without an additional bracket. Contact us before ordering. Text (469) 407-7538.
The touchscreen is inoperable below 20°F — how significant is that for trail use? In a heated cab at operating temperature, this is not a practical limitation for most trail use. The touchscreen responds once the display warms up. For extreme cold operations — doors-off desert winter camping, high-altitude snow runs, or sustained sub-zero temperatures — the HD panel (870025) has no cold weather limitation and may be the better choice for those conditions.
Touchscreen vs. HD panel for a JL or JT build? Same BantamX module, same 8 circuits, same expandability. The touchscreen gives you a customizable labeled interface with real-time circuit monitoring — best for builds that evolve and for owners who want visual system status. The HD panel gives you tactile silicone buttons operable by feel in the dark without looking, and with no cold weather limitation. Choose based on how you operate the vehicle.
What RAM hardware do I need to mount the touchscreen? The RAM-201U double socket arm is required to mount the touchscreen to its vehicle-specific bracket or a RAM ball — sold separately. The RAM-238U base and RAM-224-1U suction cup base are optional additional mounting options.
Can I expand beyond 8 circuits? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels via BantamX add-on modules.
The Obsidian Take
The BantamX Touchscreen Kit (870040) is for the 2018–2026 JL or 2020–2026 JT owner who wants 8 circuits of clean, fuse-free accessory power behind a customizable touchscreen — labeled circuits, real-time monitoring, Bluetooth in parallel, expandable to 32 channels. Modern interface, vehicle-specific hardware, OEM-aligned installation.
Three things to confirm before ordering. First — confirm your Wrangler is not a Rubicon 392 V8. Second — if you have a 4xe or diesel, confirm the special bracket requirement. Third — if the Wrangler frequently operates in temperatures below 20°F, evaluate the HD panel (870025) instead. Outside those three, this kit delivers exactly what it promises.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your VIN, window sticker, or door jamb label before ordering. Manufacturer specifications are subject to change without notice.