sPOD BantamX Modular | Green LED | 8-Circuit | Carling Panel | 36-Inch Cables | Universal | SKU BXMOD36G
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD BantamX Modular (SKU BXMOD36G) is the universal 8-circuit solid-state power management system with a Green LED Carling Contura switch panel and 36-inch battery cables — for trucks, SUVs, UTVs, overland rigs, and custom builds where the module mounts close to the battery and no vehicle-specific BantamX kit exists for the platform. Aluminum formed and welded panel housing with IP66/68-rated Carling Contura switches, dual-lit per switch, pilot push button, daisy-chainable. Single CAT-6 cable between module and panel. No wires cut, no factory circuits tapped. Operates on 12V or 24V DC. Expandable to 32 circuits. Green LED — all-around high-visibility, best switch-state readability across daylight and low-light conditions.
If your module will mount more than 3 feet from the battery, order BXMOD84G (84-inch cables) instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | BXMOD36G |
| Brand | sPOD |
| Product Line | BantamX Modular — Universal |
| LED Switch Panel Color | Green |
| Switch Panel Type | Carling Contura — aluminum formed and welded panel |
| Switch Rating | Carling Technologies Contura — IP66/68 certified (marine/harsh environment) |
| Switch Illumination | Dual-lit per switch — ON indicator + pilot light |
| Pilot Light | Controlled lower pilot light — independent push button |
| Panel Auto-Shutdown | Auto safe shutdown when panel is unplugged |
| Panel Daisy-Chain | Yes — daisy-chain panels for remote operation |
| Platform | Universal — Truck, SUV, UTV, overland, custom builds |
| Number of Circuits | 8 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Expandability | 2 controller ports (RJ45) — expandable to 32 channels; up to 4 BantamX units daisy-chainable |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Ignition Control | Optional ignition control and safety lockout for circuits 1 and 2 |
| Switch Strobe/Flash | Yes — each switch programmable for strobe or flash via On/Off/On sequence |
| Bluetooth | Built-in sPODConnect — free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Controller Cable | 10 ft CAT-6 Ethernet — extendable to 25 ft |
| Battery Cable Length | 36 inches |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Wiring Sleeves | High-temp abrasion-resistant nylon braided sleeving on all wires |
| Housing — Module | Powder-coated steel base, aluminum lid with thumb-screw fastening |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
36-Inch vs. 84-Inch — Choose Before Ordering
| Cable Length | SKU | Best For |
|---|---|---|
| 36 inches — BXMOD36G (this listing) | Module mounting within 3 feet of battery — UTV engine bays, compact setups, near-battery positions | |
| 84 inches — BXMOD84G | Module mounting more than 3 feet from battery — full-size trucks, van builds, overland rigs |
Measure your routing path from the battery to the planned module location before ordering. If it exceeds 3 feet, order BXMOD84G.
BantamX Modular Color Options — 36-Inch Cable
| SKU | LED Color | Best For |
|---|---|---|
| BXMOD36G (this listing) | Green | All-around visibility — best switch-state readability across all lighting conditions |
| BXMOD36R | Red | Maximum night vision preservation — dedicated dark trail builds |
| BXMOD36B | Blue | High-contrast visibility — daily drivers and mixed-use builds |
| BXMOD36A | Amber | Night vision-friendly, warm spectrum — trail and mixed-use builds |
BantamX Modular vs. BantamX HD Kit — Choose Your Panel Format
| Kit | Panel Format | Switch Type | IP Rating | Color Options |
|---|---|---|---|---|
| BantamX Modular — BXMOD36G (this listing) | Carling Contura — aluminum formed/welded | LED rocker switches — dual-lit | IP66/68 | Red, Green, Blue, Amber |
| BantamX HD Kit — BXTSBUNI36 | HD silicone-button panel | Silicone buttons — RGB backlit | All-weather | RGB (any color) |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- Green LED Carling Contura aluminum switch panel (IP66/68)
- 36-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- 10-ft CAT-6 Ethernet controller cable
- All required installation hardware
Critical Compatibility
| Configuration | Notes |
|---|---|
| Module mounting more than 3 feet from battery | Order BXMOD84G (84-inch cables) instead |
| Builds requiring more than 8 circuits | BantamX expandable to 32 via add-on units — order BXUNI36ADD or BXUNI84ADD |
| sPOD SourceLT systems | SourceLT is a separate 6-circuit system. Not compatible with BantamX expansion. |
| Winches and high-draw recovery motors | 30A max per circuit. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A per circuit | 30A hard ceiling per circuit. High-draw devices require direct battery wiring outside this system. |
| High-amp solenoids on the same battery post | Isolate the BantamX battery connection from any high-amp relay or solenoid. |
Common Questions
How do I confirm 36-inch cables are sufficient? Measure the actual routing path from the battery to the planned module location — not straight-line distance. Route the tape measure through the same path the cable will take: through firewall openings, along routing channels, to the mount point. If it exceeds 3 feet, order BXMOD84G. A cable that falls short mid-install requires a return.
Why Green LED for a universal build? Green sits at peak human eye sensitivity — the clearest switch-state readability across the widest range of lighting conditions including daylight, mixed interior lighting, and low-light. For a build that operates across varied environments and lighting situations, Green is the most practical all-around choice. For dedicated night trail operation where preserving dark adaptation matters, Amber (BXMOD36A) or Red (BXMOD36R) are better options.
What is the difference between BantamX Modular and the BantamX HD Kit? Panel format only. The Modular uses IP66/68-rated Carling Contura rocker switches in a welded aluminum housing with LED color options. The HD Kit uses modern silicone buttons in a billet aluminum housing with RGB backlight. Same BantamX module, same 8 circuits, same expandability.
Can I expand beyond 8 circuits? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels via BantamX add-on modules.
The Obsidian Take
The BantamX Modular (BXMOD36G) is for the builder running a compact mounting layout — module close to the battery, clean short cable routing — who wants 8 circuits of fuse-free accessory power with IP66/68-rated Green LED Carling switches and the most versatile LED color in the lineup. All-around visibility, expandable to 32 circuits.
Measure your battery cable routing path before ordering. If it exceeds 3 feet, order BXMOD84G. If it is within 3 feet and Green is the right color for the build, this is your kit.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify compatibility with your specific vehicle and build configuration before ordering. Manufacturer specifications are subject to change without notice.