sPOD BantamX Modular | Amber LED | 8-Circuit | Carling Panel | 36-Inch Cables | Universal | SKU BXMOD36A
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD BantamX Modular (SKU BXMOD36A) is the universal 8-circuit solid-state power management system with an Amber LED Carling Contura switch panel and 36-inch battery cables — for trucks, SUVs, UTVs, overland rigs, and custom builds where the module mounts close to the battery and no vehicle-specific BantamX kit exists for the platform. Aluminum formed and welded panel housing with IP66/68-rated Carling Contura switches, dual-lit per switch, pilot push button, daisy-chainable. Single CAT-6 cable between module and panel. No wires cut, no factory circuits tapped. Operates on 12V or 24V DC. Expandable to 32 circuits. Amber LED — warm, low-glare illumination that preserves night vision during trail and off-road driving.
If your module will mount more than 3 feet from the battery, order BXMOD84A (84-inch cables) instead.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | BXMOD36A |
| Brand | sPOD |
| Product Line | BantamX Modular — Universal |
| LED Switch Panel Color | Amber |
| Switch Panel Type | Carling Contura — aluminum formed and welded panel |
| Switch Rating | Carling Technologies Contura — IP66/68 certified (marine/harsh environment) |
| Switch Illumination | Dual-lit per switch — ON indicator + pilot light |
| Pilot Light | Controlled lower pilot light — independent push button |
| Panel Auto-Shutdown | Auto safe shutdown when panel is unplugged |
| Panel Daisy-Chain | Yes — daisy-chain panels for remote operation |
| Platform | Universal — Truck, SUV, UTV, overland, custom builds |
| Number of Circuits | 8 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits 1.5A–30A; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Pro-Series App Functions | Circuit timers, switch lockout, always-on circuit, current limiting (2A increments to 30A), selectable auto restart, programmable ignition control, variable strobe patterns |
| Pro-Series Startup Current | Startup current raisable to 65A for 5 seconds via Pro-Series App |
| Expandability | 2 RJ45 controller ports — expandable to 32 channels; up to 4 BantamX units daisy-chainable |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Ignition Control | Optional ignition control and safety lockout for circuits 1 and 2 |
| Switch Strobe/Flash | Yes — per switch via On/Off/On sequence; variable patterns via Pro-Series App |
| Bluetooth | Built-in sPODConnect — free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Controller Cable | 10 ft CAT-6 Ethernet — extendable to 25 ft |
| Battery Cable Length | 36 inches |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Wiring Sleeves | High-temp abrasion-resistant nylon braided sleeving |
| Housing — Panel | Formed, welded, powder-coated aluminum |
| Housing — Module Base | Powder-coated steel with silicone gasket weatherproofing |
| Housing — Module Lid | Aluminum lid |
| Legends Included | Yes |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty — verify against current sPOD policy |
| Sold As | Complete kit |
36-Inch vs. 84-Inch — Choose Before Ordering
| Cable Length | SKU | Best For |
|---|---|---|
| 36 inches — BXMOD36A (this listing) | Module mounting within 3 feet of battery — UTV engine bays, compact setups, near-battery positions | |
| 84 inches — BXMOD84A | Module mounting more than 3 feet from battery — full-size trucks, van builds, overland rigs |
Measure your routing path from the battery to the planned module location before ordering. If it exceeds 3 feet, order BXMOD84A.
BantamX Modular Color Options — 36-Inch Cable
| SKU | LED Color | Best For |
|---|---|---|
| BXMOD36A (this listing) | Amber | Night vision-friendly, warm spectrum — trail and mixed-use builds |
| BXMOD36G | Green | All-around visibility — best readability across all lighting conditions |
| BXMOD36R | Red | Maximum night vision preservation — dedicated dark trail builds |
| BXMOD36B | Blue | High-contrast visibility — daily drivers and mixed-use builds |
BantamX Modular vs. BantamX HD Kit — Choose Your Panel Format
| Kit | Panel Format | Switch Type | IP Rating | Color Options |
|---|---|---|---|---|
| BantamX Modular — BXMOD36A (this listing) | Carling Contura — aluminum formed/welded | LED rocker switches — dual-lit | IP66/68 | Red, Green, Blue, Amber |
| BantamX HD Kit — BXTSBUNI36 | HD silicone-button panel | Silicone buttons — RGB backlit | All-weather | RGB (any color) |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- Amber LED Carling Contura aluminum switch panel (IP66/68)
- 36-inch battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- 10-ft CAT-6 Ethernet controller cable
- Legend sheet
- All required installation hardware
Critical Compatibility
| Configuration | Notes |
|---|---|
| Module mounting more than 3 feet from battery | Order BXMOD84A (84-inch cables) instead |
| Builds requiring more than 8 circuits | BantamX expandable to 32 via add-on units — order BXUNI36ADD or BXUNI84ADD |
| sPOD SourceLT systems | SourceLT is a separate 6-circuit system. Not compatible with BantamX expansion. |
| Winches and high-draw recovery motors | 30A max per circuit standard; Pro-Series App raises startup current to 65A for 5 seconds only. Wire winches direct to battery through a dedicated relay. |
| Any accessory requiring more than 30A sustained | 30A hard ceiling per circuit for sustained loads. High-draw devices require direct battery wiring. |
| High-amp solenoids on the same battery post | Isolate the BantamX battery connection from any high-amp relay or solenoid. |
Common Questions
How do I confirm 36-inch cables are sufficient? Measure the actual routing path from the battery to the planned module location — not straight-line distance. Route the tape measure through the same path the cable will take: through firewall openings, along routing channels, to the mount point. If it exceeds 3 feet, order BXMOD84A. A cable that falls short mid-install requires a return.
Do I need the Pro-Series App or is the free app enough? The free sPOD app covers dimming, strobe, flash, momentary, switch linking, and on-road/off-road modes — enough for most builds. The Pro-Series App unlocks circuit timers, switch lockout, always-on programming, current limiting in 2A increments, selectable auto restart, and variable strobe patterns. It also raises startup current to 65A for 5 seconds — useful for high-inrush accessories like certain compressors. Most buyers never need Pro-Series; heavy builders will want it.
Why Amber over Red for a night trail build? Both preserve night vision significantly better than Blue or Green. Red provides maximum preservation — least pupil contraction, fastest dark adaptation recovery. Amber is slightly more readable in intermediate lighting while still protecting dark adaptation far better than cool-spectrum colors. For a rig that splits time between road and trail, Amber is the more versatile night-use choice. For a dedicated dark-trail-only rig, Red (BXMOD36R) is the better technical pick.
Can I expand beyond 8 circuits later? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels. Up to 4 BantamX units can be daisy-chained. Order BXUNI36ADD or BXUNI84ADD when ready to expand.
The Obsidian Take
The BantamX Modular (BXMOD36A) is for the builder running a compact mounting layout who wants 8 circuits of clean, fuse-free accessory power behind IP66/68-rated Amber LED Carling switches — the most versatile night-use color in the lineup. Module close to the battery, 36 inches of cable, expandable to 32 circuits when the build grows.
Two decisions before ordering. First — measure your cable routing path. If it exceeds 3 feet, order BXMOD84A. Second — if this rig runs exclusively in complete darkness, Red is the better LED choice. If it splits time between road and trail, Amber is the right call.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify compatibility with your specific vehicle and build configuration before ordering. Manufacturer specifications are subject to change without notice.