sPOD BantamX HD Kit — Polaris RZR Pro R SKU: 870092

This vehicle-specific BantamX HD kit integrates the sPOD HD switch panel onto the roof bar of the 2022–2026 Polaris RZR Pro R while positioning the BantamX power control module at the lower foot panel — delivering 8 circuits of 30-amp accessory power via a single ethernet cable, with no cutting, wire-fishing, or tapping into the vehicle's electrical system.

Before ordering: This is a Built to Order product. Call for availability and lead time before placing your order. Fits 2022–2026 Polaris RZR Pro R only. The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passenger footwell. Confirm your passenger footwell configuration before ordering.

Required separately: Accessory devices and any additional circuits beyond the included 8-channel BantamX system. Additional BantamX modules required for expansion beyond 8 channels.

Verified Fitment

Component Specifications

What Is and Is NOT Included

Critical Compatibility

• Fits 2022–2026 Polaris RZR Pro R only.
• The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passenger footwell. Confirm your passenger footwell configuration before ordering.
• HD switch panel mounts on the roof bar. PCM mounts at the lower foot panel using the included brackets.
• This is a Built to Order product — contact OFAS before ordering to confirm availability and lead time.
• Use only the included sPOD battery cables on the positive and negative terminal studs of the BantamX board. Attaching any other cable to these terminals voids the warranty.
• Connecting battery cables with reversed polarity voids the warranty.
• Do not connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post used by the BantamX system. Per manufacturer documentation, this causes irreversible damage and voids all warranties.
• Do not cut, splice, or otherwise modify the supplied wiring, connectors, or switches, and do not remove actuators without the manufacturer's specific actuator removal tool. Any such modification voids the warranty.
• Water, liquid, or chemical damage to any electrical component voids the warranty.

Installation Notes

Professional installation is strongly recommended. The HD switch panel mounts on the roof bar. The BantamX PCM mounts at the lower foot panel using the included brackets. A single 10-foot ethernet cable connects the BantamX to the HD panel — no cutting, wire-fishing, or tapping into the vehicle's electrical system is required. The 84-inch battery cable set connects the BantamX to the vehicle's battery.

Refer to the current sPOD/Baja Designs installation instructions for SKU 870092 for complete procedures, torque specifications, and all safety requirements. A color copy of the instructions is available at BajaDesigns.com under your vehicle-specific application.

The Obsidian Take

The 870092 gives the 2022–2026 Polaris RZR Pro R a clean, vehicle-specific BantamX HD installation with the panel on the roof bar and the PCM tucked at the foot panel — all routed through a single ethernet cable. Eight 30-amp circuits handle the accessory load, with uLINK expansion available if the build grows. One hard note before ordering: the PCM bracket will conflict with aftermarket accessories already mounted on the passenger footwell. If that space is occupied, resolve the conflict before the kit arrives. Built to Order — call ahead to confirm lead time.

This Product Is For You If

• You own a 2022–2026 Polaris RZR Pro R.
• You want a vehicle-specific BantamX HD installation with the panel on the roof bar and the PCM at the foot panel.
• You need 8 independently controlled, 30-amp circuits with Bluetooth app control.
• Your passenger footwell does not have aftermarket accessories that would conflict with the PCM bracket.
• You want a no-cut, no-splice installation using the vehicle's existing electrical system.

This Product Is Not For You If

• Your vehicle is not a 2022–2026 Polaris RZR Pro R.
• You have aftermarket accessories mounted on the passenger footwell that would conflict with the PCM bracket.
• You plan to connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the BantamX.
• You plan to cut, splice, or modify the supplied wiring.
• You need more than 8 circuits immediately without adding additional BantamX modules.

Common Questions

Is this product in stock?
This is a Built to Order product. Contact Obsidian Forged Auto Supply before ordering to confirm availability and lead time. Call or text 469-407-7538.

Will this kit interfere with my passenger footwell accessories?
Yes — the PCM bracket is confirmed to interfere with aftermarket accessories mounted on the passenger footwell. Confirm your footwell configuration before ordering.

Where does the HD panel mount?
The HD switch panel mounts on the roof bar of the RZR Pro R.

Where does the BantamX PCM mount?
The BantamX PCM mounts at the lower foot panel using the two included mounting brackets.

How many accessories can this kit control?
8 circuits, each rated at 30 amps at 12.5 VDC. Additional BantamX modules can be linked to expand the system.

Can I control the system from my phone?
Yes. The BantamX includes built-in Bluetooth for remote control via the sPOD app.

Does this support 24 VDC systems?
Yes. The BantamX operates on 12 VDC or 24 VDC.

Does installation require cutting or tapping into the vehicle's electrical system?
No. A single 10-foot ethernet cable connects the BantamX to the HD panel. No cutting, wire-fishing, or tapping into the vehicle's electrical system is required.

What is the warranty?
sPOD provides a non-transferable 5-year limited warranty on electronic parts and components against manufacturer defects, effective on products purchased after April 1, 2023. See the full warranty summary below.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and installation data for this kit are sourced from sPOD/Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase. A color copy of the installation instructions is available at BajaDesigns.com under your vehicle-specific application.

Required Legal, Warning, Fitment, and Return Notices

California Proposition 65 Warning: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.

Warranty Summary: sPOD provides a non-transferable 5-year limited warranty on electronic parts and components against manufacturer defects, effective on products purchased after April 1, 2023. sPOD will repair or replace qualifying items and return them at no charge. If the identical product is no longer available, sPOD will replace it with a similar product of equal value. This warranty does not cover indirect or consequential damages. This warranty excludes damage or failure resulting from: installation errors; abuse, misuse, or crash damage; reverse battery cable polarity; cutting or splicing sPOD connectors or wiring; attaching non-sPOD cables to the positive/negative terminal studs; modifying the supplied switches; removing actuators without the specific actuator removal tool; and water, liquid, or chemical damage to any electrical component. Attaching an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the BantamX causes irreversible damage and voids all warranties. Normal wear and tear is not covered. The buyer must provide a copy of the original invoice or completed product registration to file a warranty claim. All warranty claims must be submitted in writing to sPOD at 2950 Norman Strasse Road, San Marcos, CA 92069, or by email to Tech@4x4s-pod.com.

Return Policy: Returns are accepted within 30 days of receipt. Merchandise must be returned unused, in original condition, with all printed materials and accessories enclosed. Products showing signs of installation or not in original condition may incur additional charges or may not be accepted. All returns require a Return Merchandise Authorization (RMA) number and proof of original purchase. To request an RMA, email Tech@4x4s-pod.com with your full name, invoice number, and part number. A 15% restocking fee applies after 30 days. Return shipping is the buyer's responsibility. Original shipping fees are non-refundable. Obsidian Forged Auto Supply strongly recommends insuring all return packages. We are not responsible for items lost or stolen in transit; liability is assumed once the return reaches the facility. Failure to follow the return process may result in delays or refusal of the returned package. These policies are subject to change without prior notice.