Rigid Industries 30-Inch RDS SR-Series Curved Single Row Spot LED Light Bar | Universal | 88331

Rigid Industries 30-Inch RDS SR-Series Curved Single Row Spot LED Light Bar | Universal | 88331

Is This for You?

You're building a truck, SUV, UTV, or Jeep and you want a 30-inch light bar with a low-profile single-row footprint, a curved housing for increased horizontal coverage, and a tight long-range spot beam for high-speed desert and open-terrain driving. The Rigid Industries 30-Inch RDS SR-Series Curved (SKU: 88331) delivers exactly that. The SR-Series single-row design keeps the bar slim and low-profile — ideal for builds where mounting clearance is tight or where a low-visibility aesthetic matters. The RDS curvature increases horizontal light spread without sacrificing the spot beam's distance projection. This is the low-profile, long-range, wide-horizontal-coverage option in the Rigid 30-inch lineup.

The Result

30 inches of single-row curved spot illumination — slim profile, wide horizontal coverage, maximum distance projection. The RDS curvature gives you more horizontal spread than a straight spot bar at the same length without opening the beam into a driving or flood pattern. At $1,399.99, this is the same price as the E-Series Pro double-row options but delivers a fundamentally different beam geometry — lower profile, wider horizontal arc, same distance focus. If your build prioritizes low mounting height and wide horizontal coverage over raw lumen count, the 88331 is the right call.

Verified Fitment (OFAS Standard)

• Fitment: Universal — compatible with any vehicle equipped with appropriate roof rack, bumper, or grille mounting brackets and a 12V wiring harness
• Mounting: Standard RDS end-cap bolt pattern — verify bracket compatibility with your specific rack or bumper before ordering. Curved profile requires clearance verification on tight mounting locations.
• Wiring: Requires compatible wiring harness and relay switch system — not included

System Specifications

• SKU: 88331
• Series: Rigid RDS SR-Series
• Length: 30 inches
• Profile: Curved
• Beam Pattern: Spot — long-range, fixed beam
• Row Configuration: Single row (SR-Series low-profile)
• Housing Color: Black, corrosion-resistant
• Lens: Impact-resistant, sealed
• Electronics: Fully sealed, weather-rated
• Weight: 10.6 lbs
• Condition: New
• Warranty: Rigid Industries limited warranty

Installation Notes

Professional installation recommended. Requires a compatible wiring harness, relay, and switch system — not included. The curved profile requires clearance verification on tight mounting locations — confirm end-cap-to-bracket geometry before ordering. Verify mounting bracket structural load rating for the 10.6-lb bar weight before install.

Engineering Question

Choosing between the Rigid 30-Inch RDS SR-Series Curved Spot (88331, single-row curved) and the Rigid 30-Inch E-Series Pro Spot/Driving Combo (132313, double-row straight) for a bumper-mount application on a high-speed desert truck — does the RDS curvature on the 88331 produce a wider effective horizontal beam angle than the straight double-row 132313 at 500 feet, and does the single-row output of the 88331 produce enough raw lumen intensity at that distance to match the double-row 132313 in the spot zone? Contact OFAS with your mounting location, vehicle platform, and primary terrain profile and we'll confirm which 30-inch Rigid configuration delivers the right beam geometry for your specific build.