ReadyLIFT 3.0" Coil Spring Lift Kit with Falcon 1.1 Monotube Shocks | 2019–2024 Ram 3500 4WD Diesel SRW

ReadyLIFT 3.0" Coil Spring Lift Kit with Falcon 1.1 Monotube Shocks | 2019–2024 Ram 3500 4WD Diesel SRW

⚠️ Diesel trucks only. Single Rear Wheel (SRW) only — dually applications require PN 49-19332. Not compatible with Power Wagon, rear air suspension, dually wheels, or Snow Prep/Ambulance Package. Single Cab configuration has not been validated for fitment and drivability by ReadyLIFT.

Is This for You?
You're running a 2019–2024 Ram 3500 4WD diesel — single rear wheel — and you want a complete 3" 4-corner lift system that delivers a neutral, lifted stance with improved factory ride quality, clearance for 35" tires, and the performance of Falcon 1.1 Monotube shocks front and rear. The ReadyLIFT 49-19330 is a purpose-built heavy-duty coil spring lift kit that includes everything needed for a complete front and rear lift — engineered front coil springs, four Falcon 1.1 Monotube shocks, rear blocks, U-bolts, and bump stop extensions.

The Result
ReadyLIFT-engineered heavy-duty front coil springs deliver 3" of front lift while four Falcon 1.1 Monotube series shocks (two front, two rear) provide a controlled, performance-tuned ride both on- and off-road. Rear blocks and U-bolts lift the rear to achieve a neutral, level-lifted stance. Bump stop extensions complete the geometry correction package. Maximum tire size: 35x12.50 on a 20x9" wheel with 0 offset with no rub.

Verified Fitment (OFAS Standard)
✅ Fits: 2019–2024 Ram 3500 4WD (diesel — Single Rear Wheel only)
❌ Diesel trucks only — not for gasoline engine applications
❌ Does NOT fit: Ram 3500 Dually (Dual Rear Wheel) — use PN 49-19332 for dually applications
❌ Does NOT fit: Ram 3500 Power Wagon
❌ Does NOT fit: Ram 3500 with rear air suspension
❌ Does NOT fit: Ram 3500 with Snow Prep or Ambulance Package
❌ Note: Single Cab configuration has NOT been validated for fitment and drivability by ReadyLIFT — do not order for Single Cab applications

Wheel & Tire Fitment
Maximum tire size with no rub: 35x12.50 on a 20x9" wheel with 0 offset. ReadyLIFT wheel and tire fitment recommendations are based on Wheel Pros wheels and Nitto tires. Actual dimensions vary meaningfully by manufacturer — overall diameter, tread width, aspect ratio, and sidewall construction will differ. Every tire and wheel combination must be test fit prior to final installation. Upgrading to heavier 10-ply (Load Range E) all-terrain or mud-terrain tires will noticeably increase suspension stiffness and alter ride harshness compared to factory 6-ply (Load Range C) tires. Consult your local installer for application-specific guidance.

Installation & Engineering Notes
All U-bolt hardware must be torqued to specification at ride height — do not torque with the suspension unloaded. Re-torque U-bolts after the first 500 miles of driving. A professional 4-wheel alignment is mandatory post-installation. Lifting your vehicle raises its center of gravity; exercise appropriate caution when towing or hauling. All Advanced Driver Assistance Systems (ADAS) including Ram's Forward Collision Warning, Lane Departure Warning, and automatic headlight leveling must be checked and recalibrated after installation.

Engineering Question: Is your 2019–2024 Ram 3500 a diesel-powered 4WD Single Rear Wheel (SRW) truck, and what is your cab configuration? This kit does not fit dually (DRW) applications — use PN 49-19332 instead. Single Cab fitment has not been validated by ReadyLIFT. Confirm your axle configuration, cab style, and engine type before ordering.