ReadyLIFT 2.5" SST Lift Kit | 2024–2025 Toyota Tacoma

ReadyLIFT 2.5" SST Lift Kit | 2024–2025 Toyota Tacoma

Is This for You?
You bought a 2024–2025 Toyota Tacoma and you want a lifted stance with room for larger tires — but you don't need a full 3" kit with UCAs and differential drop hardware. You want a clean, economical bolt-on solution that delivers real lift front and rear, clears 285/75R17s without trimming, and keeps the factory ride quality intact. The ReadyLIFT 69-54250 2.5" SST Lift Kit is ReadyLIFT's Smart Suspension Technology applied to the new-generation Tacoma platform — proven engineering, minimal complexity, maximum value.

The Result
A 2.5" front lift via fabricated steel upper strut extensions paired with billet pre-load spacers, and 1.0" of rear lift via a rear coil spacer, delivers a level, aggressive stance with genuine ground clearance gains. The no-trim maximum tire size is a 285/75R17 on a 17x8 +35 offset wheel — a meaningful upgrade over the factory fitment with zero cutting required. Factory ride quality is preserved throughout, making this the most economical and practical entry point into the ReadyLIFT SST lineup for the 2024–2025 Tacoma.

Verified Fitment (OFAS Standard)
✅ Fits: 2024–2025 Toyota Tacoma (factory rear coil spring equipped)
❌ Does NOT fit: Tacoma equipped with rear leaf springs
❌ Does NOT fit: TRD PRO
❌ Does NOT fit: Models equipped with Adaptive Variable Suspension (AVS)
❌ Does NOT fit: Trail Hunter
❌ Sway bar disconnect compatibility: ReadyLIFT has not tested or confirmed fitment on the optional factory sway bar disconnect — verify before ordering

Wheel & Tire Fitment

ReadyLIFT wheel and tire fitment recommendations are based on Wheel Pros wheels and Nitto tires. Actual dimensions vary meaningfully by manufacturer — overall diameter, tread width, aspect ratio, and sidewall construction will differ. Every tire and wheel combination must be test fit prior to final installation. Upgrading to heavier 10-ply (Load Range E) all-terrain or mud-terrain tires will noticeably increase suspension stiffness and alter ride harshness compared to factory 6-ply (Load Range C) tires. Consult your local installer for application-specific guidance.

Installation & Engineering Notes
This is a complete bolt-on system requiring no cutting, welding, or structural modification. A professional 4-wheel alignment is mandatory post-installation to verify torque specs, confirm ride height, and lock in corrected geometry. Lifting your vehicle raises its center of gravity; exercise appropriate caution on- and off-road. All Advanced Driver Assistance Systems (ADAS) including Toyota Safety Sense (TSS), Pre-Collision System, Lane Departure Alert, and automatic high beams must be checked and recalibrated after installation.

Engineering Question: Is your 2024–2025 Tacoma equipped with rear coil springs or rear leaf springs? Does your build include TRD PRO, Trail Hunter, or Adaptive Variable Suspension (AVS)? Confirm your suspension configuration and trim level before ordering — this kit is not compatible with leaf spring or AVS-equipped models.