ReadyLIFT 2.0" Billet Aluminum Leveling Kit | 2021–2025 Ford F-150 2WD/4WD

ReadyLIFT 2.0" Billet Aluminum Leveling Kit | 2021–2025 Ford F-150 2WD/4WD

Is This for You?
You're running a 2021–2025 Ford F-150 — 2WD or 4WD, including Lightning editions — and you want a true visually level stance with 2" of front lift, factory ride quality maintained, and full compatibility with the F-150's newest safety, security, and capability systems including CCD-equipped vehicles. The 2021–2025 F-150 features a significantly updated chassis and suspension geometry compared to the 2015–2020 model, requiring an all-new purpose-built leveling kit. The ReadyLIFT 66-2120 is that kit — CNC-machined aircraft-grade 6061-T6 billet aluminum with pressed-in studs, an offset design engineered to avoid strut interference, and included alignment cam plates and cam nuts for a clean, correct installation in approximately 2.5 hours.

The Result
Two CNC-machined 6061-T6 billet aluminum offset-style front strut extensions with installation hardware deliver 2.0" of front leveling lift. The offset design adjusts the strut position to avoid interference and maintain the natural lifespan of the strut in a leveled configuration. Four cam plates and four cam nuts are included for easy installation and correct alignment geometry post-lift. Compatible with all factory safety, security, and capability features on 2021–2025 F-150 trucks, including CCD-equipped vehicles. Allows up to a 295/60R20 AT or hybrid tread tire on a 20x9 +18 wheel with no trimming required.

Verified Fitment (OFAS Standard)
✅ Fits: 2021–2025 Ford F-150 (2WD and 4WD — most trim packages)
✅ Fits: Ford F-150 Lightning editions
✅ Compatible with CCD-equipped vehicles
❌ Does NOT fit: 2021–2025 Ford F-150 Tremor — see 66-21301 for Tremor-specific lift kit
❌ Does NOT fit: 2025 F-150 Tremor models
❌ Note: Do not install on trucks with more than 22.5" of wheel hub to fender lip height — measure before ordering

Wheel & Tire Fitment
Maximum tire size with no trimming: 295/60R20 AT or hybrid tread on a 20x9 +18 offset wheel. ReadyLIFT wheel and tire fitment recommendations are based on Wheel Pros wheels and Nitto tires. Actual dimensions vary meaningfully by manufacturer — overall diameter, tread width, aspect ratio, and sidewall construction will differ. Every tire and wheel combination must be test fit prior to final installation. Upgrading to heavier 10-ply (Load Range E) all-terrain or mud-terrain tires will noticeably increase suspension stiffness and alter ride harshness compared to factory 6-ply (Load Range C) tires. Consult your local installer for application-specific guidance.

Installation & Engineering Notes
This is a bolt-on leveling kit installable in approximately 2.5 hours. Do not install on trucks with more than 22.5" of wheel hub to fender lip height — measure before ordering. Cam plates and cam nuts must be installed per ReadyLIFT instructions to ensure correct alignment geometry. A professional 4-wheel alignment is mandatory post-installation. Lifting your vehicle raises its center of gravity; exercise appropriate caution on- and off-road. All Advanced Driver Assistance Systems (ADAS) including Ford Co-Pilot360, Pre-Collision Assist, Lane-Keeping System, BLIS, and automatic headlight leveling must be checked and recalibrated after installation.

Engineering Question: Is your 2021–2025 F-150 a Tremor trim, and have you measured your hub-to-fender height? This kit does not fit Tremor models — use 66-21301 for Tremor applications. Do not install on trucks with more than 22.5" of hub-to-fender height. Confirm your trim and measurement before ordering.