ReadyLIFT 1.25" Billet Aluminum Leveling Kit | 2015–2022 Chevy Colorado & GMC Canyon

ReadyLIFT 1.25" Billet Aluminum Leveling Kit | 2015–2022 Chevy Colorado & GMC Canyon

Is This for You?
You're running a 2015–2022 Chevy Colorado or GMC Canyon — including ZR2 — and the factory rake is killing the stance. The front sits approximately 1.5" lower than the rear from the factory, and you want a clean, level look with room for a slightly larger tire without touching the suspension geometry or strut assembly. The ReadyLIFT 66-3071 is the fastest, safest, and easiest leveling solution for this platform — 100% CNC-machined 6061-T6 billet aluminum, direct bolt-on, no cutting required.

The Result
1.25" of front leveling lift via 100% CNC-machined 6061-T6 billet aluminum strut spacers that install directly onto the factory strut with no cutting or suspension modifications. Factory suspension geometry and strut travel are fully preserved. The result is a level stance that clears a 265/65-17 with no rubbing, and up to a 275/70-17 on an 8" wide wheel with 5.5" backspacing. Alignment is maintained after installation without requiring special hardware.

Verified Fitment (OFAS Standard)
✅ Fits: 2015–2022 Chevrolet Colorado (2WD and 4WD)
✅ Fits: 2015–2022 GMC Canyon (2WD and 4WD)
✅ Fits: 2015–2022 Chevrolet Colorado ZR2
❌ Does NOT fit: 2023 and newer Colorado/Canyon (next generation — different strut architecture)
❌ Does NOT fit: 2014 and earlier Colorado/Canyon

Wheel & Tire Fitment
Maximum no-rub tire size is a 265/65-17. Maximum overall tire size is a 275/70-17 on an 8" wide wheel with 5.5" backspacing. ReadyLIFT wheel and tire fitment recommendations are based on Wheel Pros wheels and Nitto tires. Actual dimensions vary meaningfully by manufacturer — overall diameter, tread width, aspect ratio, and sidewall construction will differ. Every tire and wheel combination must be test fit prior to final installation. Upgrading to heavier 8-ply or 10-ply (Load Range E) all-terrain or mud-terrain tires will noticeably increase suspension stiffness and alter ride harshness compared to factory 6-ply (Load Range C) tires. Consult your local installer for application-specific guidance.

Installation & Engineering Notes
This is a direct bolt-on leveling kit requiring no cutting, welding, or suspension modifications. Factory strut travel and suspension geometry are fully preserved. A professional alignment check is recommended after installation to confirm ride height. Lifting your vehicle raises its center of gravity; exercise appropriate caution on- and off-road. All Advanced Driver Assistance Systems (ADAS) including GM Safety Alert Seat, Lane Keep Assist, and Forward Collision Alert should be verified after any suspension height change.

Engineering Question: Is your Colorado or Canyon a 2015–2022 model year, and is it 2WD or 4WD? Confirm your model year and drivetrain before ordering — the 2023 and newer Colorado/Canyon is a new generation with a different strut architecture that is not compatible with this kit.