Project X Series X HP.70 High-Power 7-Inch LED Auxiliary Light | Combo Beam | Universal | AL538804-1

Project X Series X HP.70 High-Power 7-Inch LED Auxiliary Light | Combo Beam | Universal | AL538804-1

Is This for You?

You're building a truck, SUV, Jeep, or UTV and you want a high-power auxiliary pod with a combo beam in a more compact 7-inch housing than the HP.85. The Project X HP.70 (SKU: AL538804-1) delivers high-power LED output in a 7-inch housing with a combo beam pattern — the same beam configuration as the HP.85 (AL538805-1) in a smaller, lighter, lower-cost package. The HP.70 is the right choice for builds where mounting clearance limits the HP.85's 8.5-inch housing, where weight is a constraint, or where the HP.85's output exceeds what the application requires. This is the individual pod version — sold as a single unit for custom mounting configurations.

The Result

One HP.70 high-power 7-inch LED pod with combo beam at $377.77. The HP.70 delivers high-power output in a more compact and lighter housing than the HP.85 — $111.11 less per pod at the same combo beam configuration. The combo beam provides balanced distance projection and peripheral spread. Sealed electronics, corrosion-resistant housing, and off-road-rated construction deliver long-term reliability under vibration, weather exposure, and harsh trail conditions.

Verified Fitment (OFAS Standard)

• Fitment: Universal — compatible with any vehicle equipped with appropriate mounting brackets and a 12V wiring harness
• Mounting: Requires compatible mounting bracket — not included. Bronco-specific 4-pod bumper mount available: AC538853-1.
• vs. HP.85 (AL538805-1): HP.70 = 7-inch housing, 6.52 lbs, $377.77. HP.85 = 8.5-inch housing, 8.86 lbs, $488.88. Same combo beam pattern. Choose HP.70 for compact fitment and lower cost; choose HP.85 for maximum output.

System Specifications

• SKU: AL538804-1
• Series: Project X Series X
• Pod Size: 7 inches (HP.70)
• Beam Pattern: Combo — balanced distance projection and peripheral spread
• Housing: Sealed, corrosion-resistant, off-road-rated
• Weight: 6.52 lbs
• Sold As: Single unit
• Condition: New

Installation Notes

Professional installation recommended. Mounting bracket not included — confirm bracket compatibility with your specific mounting location before ordering. Requires compatible wiring harness and relay — not included.

Engineering Question

Running a pair of Project X HP.70 pods (AL538804-1) on the Bronco-specific 4-pod bumper mount (AC538853-1) alongside two additional HP.70 pods — does the AC538853-1 mount accommodate the HP.70's 7-inch housing diameter in all four pod positions without interference, and does the HP.70's combo beam at the bumper mounting height produce adequate peripheral coverage at slow trail speeds compared to the HP.85 at the same position? Contact OFAS with your Bronco trim level and intended pod configuration and we’ll confirm mount compatibility and beam coverage before you order.