Cognito Stainless Steel Badge Logo Kit
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The Obsidian Vision
Older Cognito boxed-style truck control arms shipped with a Cognito sticker. This kit replaces that sticker with a permanent, hardware-mounted stainless steel badge — the same badge used on current production Cognito arms. Two stainless steel Cognito badges, 4.75 inches wide, secured with 4 rivets each. Drilling required. Made in the USA.
Concierge Fitment Guarantee
Every order is manually reviewed by our technicians to ensure 100% compatibility with your build before we ship.
Engineering Breakdown
- Upgrades older Cognito boxed-style control arms that shipped with a Cognito sticker to the current hardware-mounted stainless steel badge — a permanent, corrosion-resistant identification badge that does not peel, fade, or lift at the edges the way a sticker does under the heat, vibration, and road debris exposure of a front suspension environment.
- Installs with 4 rivets per badge using a standard rivet gun after drilling the required mounting holes in the control arm — a permanent, flush-mounted installation that matches the badge mounting method used on current production Cognito arms.
- Compatible with boxed-style Cognito truck control arms and other applications where a Cognito sticker was previously used — a straightforward upgrade for any Cognito arm owner who wants the current stainless steel badge appearance.
Audit Table
| Part Number | Configuration | Materials | Weight | Included Components |
|---|---|---|---|---|
| 199-91163 | Cognito Stainless Steel Badge Logo Kit — 4.75" Wide; 4-Rivet Mount; USA-Manufactured | Stainless steel badge construction | 1 lb | Cognito stainless steel badges (2), rivets (8 total, 4 per badge) |
Verified Fitment (OFAS Standard)
✅ CONFIRMED: Compatible with all Cognito boxed-style truck control arms that previously used a Cognito sticker badge. Also compatible with other applications where a Cognito sticker was used and a permanent stainless steel badge upgrade is desired.
❌ REQUIREMENTS:
⚠️ DRILLING REQUIRED: Mounting holes must be drilled in the control arm before installing the badges. Use a drill bit sized for the included rivets. Mark and center-punch the badge mounting locations before drilling to ensure correct badge alignment.
Installation & Technical Notes
Estimated Install Time: Under 15 minutes (with a drill, correct drill bit, rivet gun, and center punch)
Install Sequence: Position the badge on the control arm and mark the 4 rivet hole locations. Center-punch each location. Drill the 4 mounting holes to the correct diameter for the included rivets. Position the badge over the holes and install all 4 rivets with a rivet gun. Repeat for the second badge.
Note: Drill only through the outer face of the control arm — do not drill through both walls of the boxed arm section.
Wheel & Tire Fitment
This is a cosmetic badge upgrade accessory — wheel and tire fitment is not affected by this installation.
Our team is standing by to confirm this badge kit is compatible with your specific Cognito control arm revision. Purchase with confidence; we review every build.