Carolina Metal Masters A-Pillar 1-Inch Ball Mount Solution — Jeep Wrangler JL / Gladiator JT SKU: 86-0218

A year-specific, no-drill A-pillar mounting solution for the 2024–2026 Jeep Wrangler JL and Gladiator JT. The 3D-machined 6061 aluminum insert replaces the factory A-pillar cover panel and accepts a 1-inch ball mount for electronic accessories including sPOD controllers, GPS units, cell phones, and similar devices. Installs in any of the four A-pillar positions — above or below the factory handle on either side — using the existing factory mounting hole.

Before ordering: Fits 2024–2026 Jeep Wrangler JL and Gladiator JT, front A-pillar positions only. Not compatible with rear positions. This kit includes one ball mount and one machined insert — one unit covers one mounting position. If you need multiple positions, order accordingly.

Required separately: RAM Mount Double Socket Arm for 1-inch ball (PN 860245) and/or 1/4-20 Female Threaded Hole with 1-inch ball adapter (PN 200244) for sPOD HD or Touchscreen mounting — both sold separately. Your electronic device and mounting hardware are not included.

Verified Fitment

This product is year-specific for 2024–2026 Wrangler JL and Gladiator JT models. It is not compatible with pre-2024 JL or JT builds — the machined insert is designed for the 2024–2026 A-pillar geometry.

Component Specifications

What Is and Is NOT Included

Included:

• (1) 3D machined 6061 aluminum base insert, anodized black
• (1) 1-inch ball mount
• All required hardware

Not included:

• RAM Mount Double Socket Arm for 1-inch ball — PN 860245 (sold separately)
• 1/4-20 Female Threaded Hole with 1-inch ball adapter — PN 200244 (sold separately; for sPOD HD or Touchscreen rear-mounting)
• Electronic device (sPOD controller, GPS, phone, etc.)
• Additional CMM inserts (one unit covers one position; order additional units for multiple positions)

Critical Compatibility

• Year-specific fitment: Designed for 2024–2026 Jeep Wrangler JL and Gladiator JT only. Not compatible with pre-2024 JL or JT A-pillar cover geometry.
• Front A-pillar only: This product fits front A-pillar positions only. Rear installation is not supported.
• Four available positions: Can be installed in any of the four A-pillar locations — above or below the factory handle on the driver or passenger side. One unit covers one position.
• Ball mount size: 1-inch ball. Confirm your device mount or RAM arm accepts a 1-inch ball before ordering.
• sPOD HD and Touchscreen: A 1/4-20 Female Threaded Hole with 1-inch ball adapter (PN 200244) is available separately to connect the sPOD HD or Touchscreen to this mount.

Installation Notes

Installation requires no drilling or cutting. Remove the existing factory A-pillar cover panel, seat the CMM machined insert in its place, and secure it using one bolt into the existing factory hole. No professional installation is required for this product.

The Obsidian Take

The 86-0218 solves the A-pillar mounting problem on 2024–2026 Wrangler JL and Gladiator JT builds cleanly — 3D-machined 6061 aluminum, anodized black, no drilling, no cutting, one factory bolt. It pairs directly with sPOD Mini6, HD, and Touchscreen controllers and accepts any 1-inch ball mount accessory. One unit covers one position; the four available A-pillar locations give you flexibility on driver-side or passenger-side placement, above or below the factory handle. The RAM Mount Double Socket Arm (PN 860245) and sPOD HD/Touchscreen adapter (PN 200244) are the two most common add-ons and are sold separately.

This Product Is For You If

• You own a 2024–2026 Jeep Wrangler JL or Gladiator JT.
• You want a no-drill, no-cut front A-pillar mount for an electronic accessory at the factory A-pillar location.
• You are running an sPOD Mini6, HD, or Touchscreen controller and want a clean, factory-position mounting point.
• You want to use a 1-inch ball mount system for a GPS, phone, or similar device.

This Product Is Not For You If

• Your Jeep Wrangler JL or Gladiator JT is not a 2024–2026 model.
• You need a rear-position or non-A-pillar mount.
• Your device mount is not compatible with a 1-inch ball.

Product Family Reference

Compatible add-ons (sold separately):

Common Questions

Does this fit pre-2024 Wrangler JL or Gladiator JT models?
No. This insert is machined specifically for the 2024–2026 A-pillar geometry and is not compatible with earlier JL or JT builds.

How many positions can I use this in?
There are four available A-pillar positions: above the factory handle (driver side), below the factory handle (driver side), above the factory handle (passenger side), and below the factory handle (passenger side). One unit covers one position. Order additional units for multiple positions.

Is any drilling or cutting required?
No. The insert replaces the factory cover panel and secures with one bolt into the existing factory hole.

What if I want to mount my sPOD HD or Touchscreen to this?
PN 200244 (1/4-20 Female Threaded Hole with 1-inch ball) attaches to the back of the sPOD HD or Touchscreen panel and connects to the 1-inch ball on this mount. Sold separately.

Do I need the RAM Double Socket Arm?
PN 860245 (RAM Mount Double Socket Arm for 1-inch ball) is needed to extend or articulate the device away from the A-pillar. It is sold separately and is not required for all setups — confirm your device mounting requirements before ordering.

What devices work with this mount?
Any device or mount system compatible with a 1-inch ball, including sPOD Mini6, HD, and Touchscreen controllers, cell phones, and GPS units.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and compatibility data for this product are sourced from sPOD product documentation for this CMM Offroad SKU and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.

Required Legal, Warning, Fitment, and Return Notices

California Proposition 65 Warning: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.

Return Policy: Returns are accepted within 30 days of receipt. Merchandise must be returned unused, in original condition, with all printed materials and accessories enclosed. Products showing signs of installation or not in original condition may incur additional charges or may not be accepted. All returns require a Return Merchandise Authorization (RMA) number and proof of original purchase. To request an RMA, email Return@bajadesigns.com with your full name, invoice number, and part number. A 15% restocking fee applies after 30 days. Return shipping is the buyer's responsibility. Original shipping fees are non-refundable. Obsidian Forged Auto Supply strongly recommends insuring all return packages. We are not responsible for items lost or stolen in transit; liability is assumed once the return reaches the facility. Failure to follow the return process may result in delays or refusal of the returned package. These policies are subject to change without prior notice.