Clayton Off Road Ride Right+ 4.5 Inch Short Arm Suspension Lift Kit for 2007-2018 Jeep Wrangler JK 4-Door
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
Is This for You?
- You're running a 2007β2018 Jeep Wrangler JK Unlimited (4-door) and want to fit 37" tires without the harsh, punishing ride that most short arm kits at this lift height deliver. The Ride Right+ uses GIIRO joints to keep road noise and vibration isolated β on-road manners stay intact at 4.5" of lift.
- You want a maintenance-free suspension system that doesn't require periodic greasing at the control arm joints. GIIRO joints are self-lubricating and self-centering β no grease fittings, no maintenance schedule.
- You're building a capable JK trail rig on a budget and want a system that can grow into the Clayton Overland+ kit later. The Ride Right+ is the entry point to Clayton's JK suspension lineup β not a dead end.
The Result
- GIIRO dual-durometer bushing joints on the front upper control arms β isolate road noise and vibration while providing superior articulation over standard rubber or polyurethane bushings. Self-lubricating, self-centering, zero maintenance.
- 1-3/8" x 5/16" DOM tubing front and rear track bars β adjustable for proper axle centering after lift installation; heavier wall construction than most short arm kits at this price point.
- SealKor zinc-rich powder-coated coil springs β corrosion-resistant finish rated for the 4.5" lift height specific to this SKU; adjustable sway bar links front and rear restore proper geometry at ride height.
The COR-3108445 is Clayton Off Road's Ride Right+ short arm suspension lift kit for the JK Unlimited (4-door) platform, configured for the 4.5" lift height. At 4.5", this is the maximum lift height in the Ride Right+ JK lineup and is optimized for 37" tire fitment. The GIIRO joint system is the key differentiator at this lift height β most short arm kits at 4.5" use standard rubber or poly bushings that transmit road noise and degrade over time. GIIRO's dual-durometer construction isolates vibration while maintaining the articulation compliance needed for off-road use. Caster correction is a critical consideration at 4.5" of lift: factory JK caster is approximately 4Β°, and the target for proper steering feel is 5.5Β°. At 4.5" of lift, achieving 5.5Β° caster may require upgrading the front lower control arms beyond what this kit includes β evaluate after installation and before final alignment. Ships at 155 lbs. Made in the USA, backed by a Lifetime Warranty.
Audit Table
| Component | Spec |
|---|---|
| Part Number | COR-3108445 |
| Lift Height | 4.5" |
| Platform | 2007β2018 Jeep Wrangler JK Unlimited (4-door) |
| Front Upper Control Arms | Fully adjustable β dual-durometer GIIRO bushings |
| Front Track Bar | Adjustable β 1-3/8" x 5/16" DOM tubing |
| Rear Track Bar | Adjustable β 1-3/8" x 5/16" DOM tubing |
| Front Sway Bar Links | Adjustable |
| Rear Sway Bar Links | Adjustable |
| Coil Springs | Powder-coated, SealKor zinc-rich finish, 4.5" rate |
| Joint Type | GIIRO β self-lubricating, self-centering, maintenance-free |
| Country of Origin | USA |
| Warranty | Lifetime |
| Shipping Weight | 155 lbs |
| Shipping Dimensions | 45" L x 24" W x 30" H |
| Tire Fitment | Up to 37" |
Verified Fitment (OFAS Standard)
Fits:
- β 2007β2010 Jeep Wrangler Unlimited X (JK)
- β 2007β2018 Jeep Wrangler Unlimited Rubicon (JK)
- β 2007β2018 Jeep Wrangler Unlimited Sahara (JK)
- β 2010β2018 Jeep Wrangler Unlimited Sport (JK)
- β 2011 Jeep Wrangler Unlimited 70th Anniversary (JK)
- β 2016 Jeep Wrangler Unlimited 75th Anniversary (JK)
- β 2016β2018 Jeep Wrangler Unlimited Sport S (JK)
- β 2018 Jeep Wrangler JK Unlimited Rubicon
- β 2018 Jeep Wrangler JK Unlimited Sahara
- β 2018 Jeep Wrangler JK Unlimited Sport
- β 2018 Jeep Wrangler JK Unlimited Sport S
Does NOT Fit:
- β 2007β2018 Jeep Wrangler JK 2-door β different spring rates and wheelbase; see JK 2-door specific SKU
- β 2019β2026 Jeep Wrangler JL β different platform entirely; see COR-3109315 and related JL SKUs
- β Jeep Gladiator JT β different wheelbase and suspension geometry
Installation & Fabrication Notes
- Align front and rear track bars after installation to re-center axles β both bars are adjustable for this purpose.
- Target caster: 5.5Β°. Factory JK caster is approximately 4Β°. At 4.5" of lift, achieving 5.5Β° may require upgrading the front lower control arms beyond what this kit includes β evaluate after installation before final alignment.
- Caster below approximately 4Β° will result in light or vague steering feel β do not leave caster uncorrected after lift installation.
- Adjust sway bar links after lift to restore proper sway bar geometry and on-road handling.
- Full 4-wheel alignment required after installation β use a shop familiar with lifted JK geometry.
- California Prop 65 Warning: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.
Wheel & Tire Fitment
- 4.5" lift: Up to 37" tires
- 3.5" lift: Up to 35β36" tires
- 2.5" lift: Up to 33β35" tires
- 1.5" lift: Up to 31β33" tires
- Backspacing and offset affect final clearance β verify with your specific wheel spec before ordering tires.
Engineering Question: Are you running a 4-door JK Unlimited or a 2-door JK? This SKU (COR-3108445) is specifically for the 4-door Unlimited. Spring rates and geometry differ between 2-door and 4-door β confirm your body style before ordering. Also confirm whether you need front lower control arm upgrades to achieve 5.5Β° caster at 4.5" of lift on your specific build.