Clayton Off Road Ride Right+ 2.5 Inch Short Arm Suspension Lift Kit for 2007-2018 Jeep Wrangler JK 2-Door and 4-Door

Is This for You?

• You're running a 2007–2018 Jeep Wrangler JK — 2-door or 4-door — and want to step up to 33–35" tires without the stiff, noisy ride that most short arm kits at 2.5" of lift produce. The Ride Right+ uses GIIRO joints to isolate road noise and vibration at all four corners — on-road comfort stays intact.
• You want front and rear upper control arms with GIIRO joints, not just front uppers. This kit includes fully adjustable front AND rear upper control arms with dual-durometer GIIRO bushings — full-corner isolation front and rear.
• You want a maintenance-free suspension system with no grease fittings and no maintenance schedule at the control arm joints. GIIRO joints are self-lubricating and self-centering — install and forget.

The Result

• GIIRO dual-durometer bushing joints on front AND rear upper control arms — isolate road noise and vibration at both ends of the vehicle while providing superior articulation over standard rubber or polyurethane bushings. Self-lubricating, self-centering, zero maintenance.
• 1-3/8" x 5/16" DOM tubing front and rear track bars — adjustable for proper axle centering after lift installation; heavier wall construction than most short arm kits at this price point.
• SealKor zinc-rich powder-coated coil springs — corrosion-resistant finish rated for the 2.5" lift height; adjustable sway bar links front and rear restore proper geometry at ride height.

The COR-3108225 is Clayton Off Road's Ride Right+ short arm suspension lift kit for the JK platform in both 2-door and 4-door configurations, set at the 2.5" lift height. This SKU includes fully adjustable front AND rear upper control arms with GIIRO joints — providing GIIRO isolation at all four corners of the suspension. At 2.5", this kit is optimized for 33–35" tire fitment and is the most popular lift height in the Ride Right+ JK lineup for daily-driven builds that also see weekend trail use. Critical 2-door note: 2-door JK models will see approximately 1" more lift than the advertised 2.5" due to lighter vehicle weight — net lift on a 2-door is approximately 3.5". Plan your tire and wheel clearance accordingly. Caster correction is a consideration at 2.5" of lift: factory JK caster is approximately 4°, and the target for proper steering feel is 5.5°. Achieving 5.5° may require upgrading the front lower control arms beyond what this kit includes — evaluate after installation before final alignment. Ships at 175 lbs. Made in the USA, backed by a Lifetime Warranty.

Audit Table

Verified Fitment (OFAS Standard)

Fits — 4-Door (Unlimited):

• ✅ 2007–2010 Jeep Wrangler Unlimited X (JK)
• ✅ 2007–2018 Jeep Wrangler Unlimited Rubicon (JK)
• ✅ 2007–2018 Jeep Wrangler Unlimited Sahara (JK)
• ✅ 2010–2018 Jeep Wrangler Unlimited Sport (JK)
• ✅ 2011 Jeep Wrangler Unlimited 70th Anniversary (JK)
• ✅ 2016 Jeep Wrangler Unlimited 75th Anniversary (JK)
• ✅ 2016–2018 Jeep Wrangler Unlimited Sport S (JK)

Fits — 2-Door:

• ✅ 2007–2010 Jeep Wrangler X (JK)
• ✅ 2007–2018 Jeep Wrangler Rubicon (JK)
• ✅ 2007–2018 Jeep Wrangler Sahara (JK)
• ✅ 2010–2018 Jeep Wrangler Sport (JK)
• ✅ 2011 Jeep Wrangler 70th Anniversary (JK)
• ✅ 2016 Jeep Wrangler 75th Anniversary (JK)
• ✅ 2016–2018 Jeep Wrangler Sport S (JK)
• ✅ 2018 Jeep Wrangler JK Rubicon, Sahara, Sport, Sport S

Does NOT Fit:

• ❌ 2019–2026 Jeep Wrangler JL — different platform entirely
• ❌ Jeep Gladiator JT — different wheelbase and suspension geometry

2-Door Net Lift Note: 2-door JK models will see approximately 1" more lift than the advertised 2.5" due to lighter vehicle weight — net lift is approximately 3.5" on a 2-door. Plan wheel and tire clearance accordingly.

Installation & Fabrication Notes

• Align front and rear track bars after installation to re-center axles — both bars are adjustable for this purpose.
• Target caster: 5.5°. Factory JK caster is approximately 4°. Depending on your specific setup, achieving 5.5° at 2.5" of lift may require upgrading the front lower control arms beyond what this kit includes — evaluate after installation before final alignment.
• Caster below approximately 4° will result in light or vague steering feel — do not leave caster uncorrected after lift installation.
• Adjust sway bar links after lift to restore proper sway bar geometry and on-road handling.
• Full 4-wheel alignment required after installation — use a shop familiar with lifted JK geometry.
• California Prop 65 Warning: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.

Wheel & Tire Fitment

• 2.5" lift (4-door): Up to 33–35" tires
• 2.5" lift (2-door): Net ~3.5" — verify clearance for 33–35" tires with your specific wheel offset and backspacing
• 3.5" lift: Up to 35–36" tires — see COR-3108235
• 4.5" lift: Up to 37" tires — see COR-3108245
• 1.5" lift: Up to 31–33" tires
• Backspacing and offset affect final clearance — verify with your specific wheel spec before ordering tires.

Engineering Question: Are you running a 2-door JK or a 4-door JK Unlimited? 2-door models will net approximately 1" more lift than advertised due to lighter vehicle weight — confirm your body style and verify wheel/tire clearance before ordering. Also confirm whether you need front lower control arm upgrades to achieve 5.5° caster at 2.5" of lift on your specific build.