Bedslide 1500 Contractor Cargo Slide | 95" x 48" | 1,500 lb Capacity | WeatherDeck | 75% Extension | Black | 8-Foot Long Bed | Silverado/Sierra/Ram 1981–Current | F-Series/F-150/Titan/Tundra | SKU: 15-9548-CGB

Verified Fitment

This slide fits full-size trucks with an 8-foot long bed across five makes and six model families. The 95-inch platform is the largest in the Contractor lineup and is shared across all major domestic and import full-size truck brands with an 8-foot bed. Fitment is bed-length dependent — no generation splits or interior dimension changes affect this platform across its confirmed year ranges.

Fitment is bed-length dependent only. Engine, fuel type, drivetrain, and cab configuration do not restrict this fitment provided the bed measures 8 feet. This is the only Bedslide platform that fits across all major full-size truck brands with a single SKU.

Verify fitment by text: (469) 407-7538

Does NOT Fit

Verify fitment by text: (469) 407-7538

Component Specifications

What Is and Is NOT Included

Included:

Not Included:

No required companion hardware confirmed for standard steel-bed installations without aluminum bed or tailgate step concerns.

Critical Compatibility

No confirmed electrical, ADAS, air suspension, or OEM technology system conflicts for this product.

Installation Notes

Complexity: Intermediate to high. Professional installation strongly recommended given the 230 lb platform weight.

Estimated time: Approximately 1 hour per Bedslide source data for experienced installers. Two-person minimum — the 95" platform at 230 lb cannot be safely positioned solo.

Install method: Drilled mount. Four ½-inch holes required in the truck bed floor. Permanent bed modification.

Required tools:

What makes it complex:

• At 230 lb and 95 inches, this is the heaviest and longest platform in the Contractor lineup. Two people are required at minimum — three is recommended for safe positioning in the bed without damaging the slide or the truck.
• Drilling four ½-inch holes is permanent. Center the unit between wheel wells and confirm 1.5-inch clearance at the bulkhead before marking.
• Do not use air impact tools on riv nuts — hand-install only.
• 2015+ Ford F-150 8' bed owners must install BSA-HALUMKT before mounting.
• Bedliner presence requires removal or adjustment.
• Post-install: cycle the slide under partial load and confirm all locking positions engage at the correct intervals before full-load use.

Post-install: No alignment, calibration, or dealer visit required for standard installations.

Shipping: 95-inch platform ships LTL freight. Residential delivery included. OFAS will contact you after order placement to coordinate delivery.

Common Questions

Does this fit any 8-foot long bed full-size truck?
Yes — if the truck is a confirmed full-size with an 8-foot bed, the 95" x 48" platform fits across all major brands. Chevrolet Silverado and GMC Sierra from 1970 through current. Ram from 1981 through current. Ford F-Series and F-150 from 1970 through current. Nissan Titan from 2004 through current. Toyota Tundra from 2007 through current, plus the T-100 from 1993–1999. The 8-foot bed interior is consistent enough across these applications to share a single platform size. Confirm your bed length is 8 feet before ordering — not all cab configurations are available with 8-foot beds.

At 230 lb, can I install this myself?
Technically yes, but professional installation is strongly recommended. Positioning a 95-inch, 230 lb platform in a truck bed while drilling and mounting requires at least two people and significantly benefits from a third. The install itself is straightforward — four ½-inch holes, riv nuts, four bolts — but the weight makes solo work a safety and alignment risk. If you proceed without a dealer, plan for three people.

My F-150 has an aluminum bed — do I need anything extra?
Yes — BSA-HALUMKT is required for any 2015 or newer Ford F-150 with an aluminum bed. The 8-foot F-150 bed is typically found on Regular Cab and SuperCab configurations, which are less common but confirmed to exist. The steel slide frame in direct contact with aluminum bed rails causes galvanic corrosion. Budget for this kit before ordering.

What is the difference between this and the Heavy Duty 20-9548-HDB?
Same 95" x 48" platform. The Contractor (this SKU) is rated 1,500 lb with a 2+2 bearing configuration. The Heavy Duty (20-9548-HDB) is rated 2,000 lb with 4 cam-follower bearings. If your 8-foot bed will carry loads approaching or exceeding 1,500 lb consistently, the Heavy Duty tier is the correct choice. The Contractor covers most commercial and contractor work-truck applications at a lower cost.

What is the warranty?
5-year standard warranty. Lifetime warranty available upon product registration with Bedslide. Register immediately after installation.

The Obsidian Take

This slide is for the full-size long-bed truck operator who needs 1,500 lb contractor-tier capacity across the full 8-foot interior — Silverado, Sierra, Ram, F-150, F-Series, Titan, or Tundra. The 95" x 48" platform is the only Bedslide Contractor SKU that fits all of these applications with a single part number, which makes the fitment decision simple: measure the bed, confirm it's 8 feet, order this SKU.

It is not for any truck with a bed shorter than 8 feet — every sub-8-foot application has its own platform size and SKU. It is not for buyers who need 2,000 lb capacity — the Heavy Duty tier (20-9548-HDB) covers that on the same platform. And it is not for anyone who needs full tailgate extension — the 75% travel is fixed in the Contractor tier. If 1,000 lb capacity is sufficient, the Classic tier (10-9548-CLB) is available on the same 95" x 48" platform at lower cost.

At 230 lb with cam-follower bearings, WeatherDeck composite decking, and a BedTrax T-slot system that supports the full BedBin accessory ecosystem, this is the most capable per-SKU application coverage in the Contractor lineup — one slide, every 8-foot full-size truck.

Manufacturer Data Disclaimer

Product images and data are manufacturer-provided for reference only. Actual product appearance, components, packaging, finishes, and fitment details may vary by application, part number, or manufacturer updates.

Prop 65 Warning

WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Non-Returnable Notice

This item is non-returnable once installed, drilled, assembled, or modified. Inspect the product before installation. Text (469) 407-7538 with your year, make, model, cab style, bed length, bedliner details, and any tailgate step or accessory before purchasing if you have fitment questions.