Bedslide 1000 Classic Cargo Slide | 73" x 48" | 1,000 lb Capacity | WeatherDeck | 75% Extension | Black | 2009–Current Dodge/Ram 1500/2500/3500 6.4-Foot Bed | SKU: 10-7348-CLB
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
Verified Fitment
This slide fits the Dodge Ram and Ram 1500, 2500, and 3500 with a 6.4-foot bed, model years 2009 through current. Fitment applies with or without the RamBox storage system — the 6.4-foot bed interior accommodates the 73" x 48" platform regardless of RamBox configuration.
| Make | Model | Confirmed Years | Bed Length | RamBox | Notes |
|---|---|---|---|---|---|
| Dodge / Ram | Ram 1500 | 2009–current | 6.4 ft | With or without | Includes 2019–current Ram 1500 Classic body-on-frame |
| Dodge / Ram | Ram 2500 | 2009–current | 6.4 ft | With or without | |
| Dodge / Ram | Ram 3500 SRW | 2009–current | 6.4 ft | With or without | DRW bed width — see Field 3 |
Fitment is bed-length dependent. Engine, fuel type, and drivetrain do not affect this fitment. Match the truck to the 6.4-foot Dodge/Ram bed before ordering.
Note on pre-2009 Ram fitment: LEER's fitment selector includes 2003–2008 Ram 2500/3500 and 2004–2008 Ram 1500 with the 6.4-foot bed for this SKU. Bedslide's own application guide begins at 2009. If your Ram is a 2003–2008 model, text (469) 407-7538 before ordering — OFAS will verify fitment against both sources before your order ships.
Verify fitment by text: (469) 407-7538
Does NOT Fit
| Exclusion | Reason | Correct SKU |
|---|---|---|
| Ram 1500 5.7-foot bed without RamBox | Bedslide assigns the 5.7-foot non-RamBox Ram bed to a 65" x 48" platform | 10-6548-CLB |
| Ram 1500 5.7-foot bed with RamBox | Bedslide assigns the 5.7-foot RamBox Ram bed to a 63" x 47" platform | 10-6347-CLB |
| Ram 1500/2500/3500 6.5-foot bed (pre-2002) | Pre-2002 Ram 6.5-foot bed requires a 75" x 48" platform | 10-7548-CLB |
| Ram 1500/2500/3500 8-foot bed | Bedslide assigns Ram 8-foot beds to a 95" x 48" platform | 10-9548-CLB |
| Ram 3500 DRW (dual rear wheel) | DRW bed width varies — not explicitly confirmed in Bedslide's application guide for this SKU | Text (469) 407-7538 |
| All Ford F-150 applications | F-150 beds use different platform sizes — 5.5-foot takes 65x48, 6.5-foot takes 75x48, 8-foot takes 95x48 | See F-150 fitment family |
| Ford F-250/F-350 Super Duty (1999–current) | 1999+ Super Duty 6.9-foot bed requires 79" x 48" platform | 10-7948-CLB |
| Chevrolet Silverado / GMC Sierra | Silverado/Sierra 6.5-foot beds use 75x48 (pre-2019) or 78x48 (2019+) platforms | See Silverado fitment family |
| Toyota Tacoma / Tundra | Toyota beds are assigned to different platform sizes — Tacoma 6-foot takes 70x41, Tundra 5.5-foot takes 63x47, Tundra 6.5-foot takes 75x48 | See Toyota fitment family |
| Trucks with spray-in or drop-in bedliners | Installation over bedliners not recommended per Bedslide — liner thickness and surface vary | Remove or adjust liner before install |
| Buyers needing 1,500 lb capacity | This SKU is rated 1,000 lb evenly distributed | 15-7348-CGB (Contractor) |
| Buyers needing 2,000 lb capacity | This SKU is rated 1,000 lb evenly distributed | Heavy Duty tier — no 73x48 HD SKU exists |
| Buyers needing full tailgate extension | This is a 75% extension platform — slide does not travel past the tailgate | Max Extension series |
| Wheel or tire constraints | No specific wheel or tire size constraints confirmed in Bedslide source data | Confirm with installer |
Verify fitment by text: (469) 407-7538
Component Specifications
| Component | Specification |
|---|---|
| Platform dimensions | 73 inches x 48 inches |
| Rated capacity | 1,000 lb (evenly distributed static load) |
| Extension | 75% — approximately 55 inches of the 73-inch platform clears the tailgate plane |
| Deck height above bed floor | 4.5 inches |
| Deck surface | WeatherDeck composite — lightweight, all-weather durability |
| Bearing configuration | (2) cam-follower bearings, 3,282 lb static rating each (load-bearing end) + (2) sealed ball roller bearings (guide end) |
| D-ring tie-downs | (4) D-ring tie-downs included |
| Grab bar | Full-width grab bar — accessible from either side |
| Locking positions | Multiple locking positions for load security during transit |
| Guardrails | Full perimeter guardrail included |
| Latch system | Hard latch system |
| BedTrax T-slots | Included — compatible with Bedslide BedBin accessory ecosystem |
| Finish | Black Edition |
| Unit weight | 160 lb |
| Manufacturing tolerance | ±0.25 inch |
| Country of manufacture | Made in USA |
| Product series | Bedslide 1000 Classic |
What Is and Is NOT Included
Included:
| Component |
|---|
| Bedslide 10-7348-CLB cargo slide platform (73" x 48") |
| WeatherDeck composite deck surface |
| Full perimeter guardrail kit |
| Full-width grab bar |
| (4) D-ring tie-down anchors |
| (2) cam-follower bearing assemblies + (2) sealed ball roller bearing assemblies |
| Multiple-position hard latch system |
| BedTrax T-slot track system |
| Standard installation hardware: riv nuts, riv nut tool, 5/16" bolts, split lock washers, flat washers |
Not Included:
| Item | Notes |
|---|---|
| BSA-SPACEBLKIT tailgate step clearance kit | Required if the slide does not clear the tailgate or the truck has a step integrated into the tailgate. Sold separately. |
| BSA-HALUMKT aluminum bed install kit | Not applicable to Ram or standard steel-bed trucks. Required for aluminum-bed applications only — not this application. |
| No-drill mount kit | No confirmed no-drill kit SKU for Ram 6.4-foot bed applications. Drilling four ½-inch holes is required. |
| Professional installation labor | Dealer installation recommended. Labor not included. |
| BedBin storage accessories | BedBin deck dividers, Mini Kix, Side Kix, and Upper Tray are sold separately and attach via BedTrax T-slots. |
Critical Compatibility
| System / Condition | Interaction | Action Required |
|---|---|---|
| Ram 6.4-foot bed with RamBox | RamBox does not affect this SKU — the 73" x 48" platform fits the 6.4-foot Ram bed with or without RamBox. This is the opposite of the 5.7-foot bed, which splits by RamBox. | No action required — order normally if truck has 6.4-foot bed. |
| Ram 3500 DRW | DRW trucks have wider rear axle track and different wheel well intrusion than SRW. Bedslide's guide does not explicitly exclude or confirm DRW for this SKU. | Text (469) 407-7538 before ordering if your Ram 3500 is a dually. |
| Tailgate with integrated step | If the tailgate has an integrated step (e.g., Ram Multifunction Tailgate or aftermarket tailgate step), the Bedslide may contact the step mechanism when extended. | Purchase BSA-SPACEBLKIT (Bedslide Lift Block Kit) for clearance. |
| Spray-in / drop-in bedliners | Bedslide explicitly states installation over bedliners is not recommended. Liner thickness and surface vary. | Remove or modify liner before installation. |
| Tonneau covers and truck caps | This slide is designed to operate under a tonneau cover or truck cap. Confirm cover interior height accommodates the 4.5-inch deck profile plus loaded cargo height. | Verify with your cover manufacturer if running a low-profile tonneau. |
| Pre-2009 Ram with 6.4-foot bed | LEER data supports fitment back to 2003–2004; Bedslide's own guide begins at 2009. Conflict exists between sources. | Text (469) 407-7538 for pre-2009 Ram fitment verification before ordering. |
No confirmed electrical, ADAS, MagneRide, air suspension, or OEM system conflicts for this product.
Installation Notes
Complexity: Intermediate. Dealer installation recommended by Bedslide.
Estimated time: Approximately 1 hour per Bedslide source data.
Install method: Drilled mount. Four ½-inch holes are required in the truck bed floor. This is not a no-drill installation.
Required tools:
| Tool | Required |
|---|---|
| Drill | Yes |
| ½-inch drill bit | Yes |
| Riv nut tool | Yes (included in hardware kit) |
| ½-inch socket and ratchet | Yes |
| ½-inch open-end wrench | Yes |
| Allen wrench | Yes |
| Tape measure | Yes |
| Marker | Yes |
What makes it complex:
- Drilling four ½-inch holes into the bed floor is a permanent modification. Measure twice — center the unit between wheel wells and confirm 1.5-inch clearance at the bulkhead before marking holes.
- Do not use air impact tools on riv nuts — hand-install only to avoid stripping.
- Tailgate clearance must be confirmed before finalizing position. The tailgate must close without contacting the Bedslide frame. If clearance is insufficient, BSA-SPACEBLKIT is required.
- At 160 lb, a second person is required for safe positioning.
- Bedliner presence requires removal or adjustment before install.
Post-install: No alignment, calibration, or dealer visit required. Cycle the slide under partial load and confirm all locking positions engage before full-load use.
Shipping: 73-inch platform ships LTL freight. Residential delivery included. OFAS will contact you after order placement to coordinate delivery.
Common Questions
Does this fit my Ram 1500 with the 5.7-foot bed?
No. The 5.7-foot Ram 1500 bed requires a different platform size — 65" x 48" if you don't have RamBox (SKU 10-6548-CLB), or 63" x 47" if you do have RamBox (SKU 10-6347-CLB). The 73" x 48" platform is sized specifically for the 6.4-foot Ram bed. Measure your bed interior before ordering.
My Ram 6.4-foot bed has RamBox. Does that affect fitment?
No — for the 6.4-foot Ram bed, RamBox does not change the SKU. Bedslide's application guide confirms the 73" x 48" platform fits the 6.4-foot bed with or without RamBox. This is different from the 5.7-foot bed, where RamBox status drives a different platform size.
This requires drilling — is that a dealbreaker?
Drilling four ½-inch holes is required. This is a permanent bed modification. If your truck is leased, confirm with your leasing company before ordering. If you want to avoid drilling, Bedslide does not offer a confirmed no-drill kit for the Ram 6.4-foot bed application. Text (469) 407-7538 to discuss options before ordering.
What is the difference between this and the 1500 Contractor version?
The Contractor tier (SKU 15-7348-CGB) raises capacity from 1,000 lb to 1,500 lb. The bearing configuration is the same between tiers. The capacity difference comes from the structural rating of the platform components. If your loads consistently approach 1,000 lb, the Contractor is the correct tier. The Classic is the right choice for general cargo, tools, and daily work-truck use where 1,000 lb is sufficient.
What is the warranty?
5-year standard warranty. Lifetime warranty available upon product registration with Bedslide. Register immediately after installation.
My Ram is a 2006 or 2007 model — does this fit?
Bedslide's application guide shows this SKU fits the Ram 6.4-foot bed starting in 2009. LEER's fitment data extends fitment back to 2003–2004 for Ram 2500/3500 and 2004 for Ram 1500. This is a source conflict. Text (469) 407-7538 with your year, model, and bed length — OFAS will verify against both sources before your order ships.
The Obsidian Take
This slide is for the 2009-and-newer Dodge/Ram 1500, 2500, or 3500 owner with a 6.4-foot bed who needs organized, 1,000 lb capacity cargo access in black — whether the truck has RamBox or not. It is the correct choice for contractors, fleet operators, and daily work-truck users who load tools, coolers, equipment, and gear that stay under 1,000 lb evenly distributed.
It is not for the Ram owner with a 5.7-foot bed — that is a different platform entirely, with or without RamBox. It is not for buyers who need 1,500 lb or 2,000 lb capacity — the Contractor and Heavy Duty tiers exist for that. And it is not for anyone who wants the slide to travel completely out of the bed — the 75% extension is a design characteristic, not a limitation to configure around.
At 160 lb, 73" x 48", with a 4.5-inch profile and WeatherDeck composite deck, this is a purpose-built tool for the Ram 6.4-foot bed — not a universal cargo accessory.
Manufacturer Data Disclaimer
Product images and data are manufacturer-provided for reference only. Actual product appearance, components, packaging, finishes, and fitment details may vary by application, part number, or manufacturer updates.
Prop 65 Warning
WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Non-Returnable Notice
This item is non-returnable once installed, drilled, assembled, or modified. Inspect the product before installation. Text (469) 407-7538 with your year, make, model, bed length, cab style, RamBox status, bedliner details, and any tailgate step or accessory before purchasing if you have fitment questions.