BDS 4-Inch Lift Kit | FOX 2.0 Performance Series Coil-Overs | 5-Inch Rear Block | Chevy Silverado / GMC Sierra 1500 4WD 2007–2013 | SKU: 184PSS

Verified Fitment

Component Specifications

What Is and Is NOT Included

Critical Compatibility

Drivetrain and platform year confirmation are mandatory before ordering. This kit is 4WD only. The 2014 Silverado/Sierra 1500 is a different platform entirely — do not order this kit for a K2-generation truck. Contact OFAS at (469) 407-7538 before ordering if you need help confirming your drivetrain or platform year.

GMT900 Silverado/Sierra 1500 4-Inch Kit Variant Reference

Contact OFAS at (469) 407-7538 to confirm which SKU is correct for your drivetrain, shock preference, and rear system before ordering.

Installation Notes

Skill Level: Advanced. A 4-inch coil-over lift with 5-inch rear axle block on the GMT900 platform requires a qualified suspension shop. This is not a bolt-on leveling kit. Do not attempt DIY installation.

Required Tools:

• Full hydraulic lift rated for truck weight
• Coil-over compression tool
• Torque wrench
• Full socket and wrench set

Alignment: Full front-end alignment is mandatory after installation. Do not operate the vehicle on public roads before alignment is completed.

Rear Axle Block Installation: 5-inch axle blocks must be installed per BDS specifications. Confirm U-bolt torque specs and axle centering after installation. Improperly centered axle blocks cause driveline vibration and premature U-joint wear.

Extended Brake Lines: Verify whether extended brake lines are required for your specific configuration at time of installation.

Torque Specs: Follow BDS-specified torque values included in the installation instructions. Do not substitute generic torque values on a lifted platform.

Tire Fitment: At 4 inches of lift on the GMT900 platform, typical fitment runs 33–35-inch tires depending on wheel offset and backspacing. Confirm maximum tire diameter and wheel specifications with your wheel and tire supplier before ordering.

The Obsidian Take

SKU 184PSS is the standard-tier 5-inch block rear system for the 2007–2013 GMT900 Silverado or Sierra 1500 4WD owner who wants 4 inches of front lift with full FOX 2.0 Performance Series damping front and rear at the entry price point for this platform. FOX 2.0 coil-overs up front, 5-inch axle block rear, FOX 2.0 rear shocks — a complete front-to-rear system without the FOX 2.5 PE price premium.

The decision between 184PSS and 184PES is the shock tier only. Same 4WD platform, same 5-inch rear axle block, same geometry — FOX 2.0 Performance Series here versus FOX 2.5 PE with external reservoir in 184PES. FOX 2.0 Performance Series is a legitimate damping upgrade over factory shocks and handles daily driving, mild off-road, and light towing without issue. If you run this truck hard off-road, tow at or near capacity regularly, or want external reservoir thermal management, step up to SKU 184PES. If the FOX 2.0 Performance Series meets your use case, 184PSS delivers the same 4-inch lift geometry and 5-inch rear block at a lower price point — and that is the correct call for a lot of GMT900 4WD owners.

The decision between 184PSS and 185PSS is the rear system. Both are 4WD-specific and both run FOX 2.0. SKU 185PSS uses replacement leaf springs and 184PSS uses a 5-inch axle block. A block rear raises the axle under the existing factory spring pack without changing the spring rate. A replacement leaf spring delivers a new spring rate, corrected geometry, and better articulation under towing and hauling loads. For trucks used for towing or heavy hauling, 185PSS is the stronger long-term rear solution. If a block rear fits your use case and budget, 184PSS is the correct choice.

This kit is for you if: You own a 2007–2013 Silverado or Sierra 1500 4WD, you want 4 inches of front lift with a 5-inch rear axle block, and FOX 2.0 Performance Series front and rear is the correct tier for your budget and use case.

This kit is not for you if: Your truck is 2WD — order SKU 186PSS or SKU 187PSS. You want FOX 2.5 PE damping — order SKU 184PES. You want replacement leaf springs at the rear instead of a block — order SKU 185PSS. You have a 2014 or newer Silverado/Sierra — different platform entirely, contact OFAS for the correct K2 SKU. You have a 2006 or earlier, or an HD model. Confirm your year and drivetrain before ordering — the kit is non-returnable once installed.

Common Questions

What is the difference between SKU 184PSS and SKU 184PES?
Both kits fit the 2007–2013 Silverado/Sierra 1500 4WD and deliver 4 inches of front lift with a 5-inch rear axle block on the GMT900 platform. The only difference is the shock tier — 184PSS uses FOX 2.0 Performance Series and 184PES uses FOX 2.5 Performance Elite with external reservoir. If you wheel hard or tow at capacity regularly, order 184PES. Call (469) 407-7538 to confirm which fits your use case.

What is the difference between SKU 184PSS and SKU 185PSS?
Both kits fit the 2007–2013 Silverado/Sierra 1500 4WD and run FOX 2.0 Performance Series on the GMT900 platform. The difference is the rear system — 184PSS uses a 5-inch axle block and 185PSS uses replacement leaf springs. If you tow regularly or want a new spring rate at the rear, 185PSS is the stronger long-term solution. Call (469) 407-7538 to confirm which rear system fits your use case.

What is the difference between SKU 184PSS and SKU 186PSS?
Drivetrain. Both kits run FOX 2.0 Performance Series with a 5-inch axle block rear on the GMT900 platform. SKU 184PSS is for 4WD and SKU 186PSS is for 2WD. Confirm your drivetrain before ordering — this is a non-returnable error.

Does this fit my 2014 Silverado 1500?
No. The 2014 Silverado/Sierra 1500 is the K2 generation — a different platform entirely. Contact OFAS at (469) 407-7538 and we will identify the correct K2 SKU for your truck.

Does this kit include rear lift?
Yes. SKU 184PSS includes 5-inch rear axle blocks and FOX 2.0 Performance Series rear shocks. This is a complete front-to-rear system.

What size tires fit at 4-inch lift on the GMT900 platform?
Typical fitment runs 33–35-inch tires depending on wheel offset and backspacing. Confirm maximum tire diameter and wheel specifications with your wheel and tire supplier before ordering.

What warranty covers this kit?
BDS suspension components are covered by the BDS No-Fine-Print Warranty. FOX 2.0 Performance Series shocks carry a FOX 1-year limited warranty.

Manufacturer Data Disclaimer: Specifications sourced from BDS Suspension product documentation and authorized distributor data. Obsidian Forged Auto Supply is an authorized BDS Suspension dealer. Manufacturer specifications are subject to change without notice.

⚠️ California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information visit P65Warnings.ca.gov.

⚠️ Non-Returnable Notice: Suspension components are non-returnable once installed. Confirm drivetrain, year, and platform before ordering. Call (469) 407-7538 with any fitment questions before your order is placed.