Baja Designs LP6 Pro Bumper Light Kit — Jeep Wrangler JL / Gladiator JT SKU: 447671 | Jeep Wrangler JL 2018–2026 / Gladiator JT 2020–2026 | OEM Steel Bumper | Driving/Combo | Clear | Toggle

A complete bumper light kit tested specifically on the Jeep JL and JT with the Rubicon steel bumper. Built around the LP6 Pro pod (SKU 270003) — a 6-inch, 11,225-lumen Driving/Combo unit with Integrated Peripheral Technology (IPT) delivering 1,972 lumens of dedicated peripheral lighting, Direct Ducted Cooling, and three lighting modes including amber daytime running light backlighting. Toggle harness wiring is designed to run in conjunction with factory upfitter systems or sPOD and Switch Pros power distribution units.

Before ordering: This kit is designed for the Jeep Wrangler JL and Gladiator JT with the OEM steel bumper — specifically tested on the Rubicon steel bumper. It will not fit aftermarket bumpers. Confirm your bumper configuration before ordering.

Required separately: A factory upfitter system, sPOD unit, or Switch Pros unit is not required but is compatible — the kit toggle harness is specifically designed to integrate with these systems. The LP6 Pro pods use a DT06-4S Deutsch terminal connector — confirm connector compatibility if integrating with existing wiring.

Verified Fitment

OEM steel bumper required. This kit has been tested with the Rubicon steel bumper. Aftermarket bumpers are not supported.

Component Specifications

LP6 Pro LED Light Pod (SKU 270003 — included in kit):

What Is and Is NOT Included

Included:

• LP6 Pro LED Light Pods (SKU 270003) — vehicle-specific kit quantity for JL/JT bumper application
• Toggle switch wiring harness — designed for use with factory upfitter systems or sPOD/Switch Pros units
• All necessary mounting hardware (stainless steel)

Not included:

• Factory upfitter system, sPOD unit, or Switch Pros unit (compatible but not required)

Critical Compatibility

• OEM steel bumper only: This kit is specifically designed and tested for the Jeep JL/JT OEM steel bumper, including the Rubicon steel bumper. Aftermarket bumpers are not supported.
• Toggle harness integration: The included toggle harness is specifically designed to work in conjunction with factory upfitter systems, sPOD units, or Switch Pros power distribution units. A separate upfitter harness is not required.
• DT06-4S Deutsch connector: The LP6 Pro pods use DT06-4S Deutsch terminal connectors. Confirm connector compatibility if integrating with existing wiring systems before ordering.
• Lighting modes: The LP6 Pro offers three modes — High Beam, Low Beam, and Amber Daytime Running Light backlighting. All three are controlled through the kit harness.
• IPT peripheral lighting: The Integrated Peripheral Technology provides 1,972 lumens of dedicated peripheral illumination through 4 dedicated LEDs, separate from the 6 main forward-projecting LEDs.
• Off-road use: Some lighting outputs may not be legal for use on public roads. Buyer is responsible for compliance with all applicable laws and regulations.

Installation Notes

Professional installation is strongly recommended. This kit has been tested and designed specifically for the Jeep JL and JT OEM steel bumper — the wiring routes and mounting positions are specific to this application. The toggle harness integrates with the factory upfitter system or sPOD/Switch Pros unit if present. All necessary hardware is included.

Refer to the current Baja Designs installation instructions for SKU 447671 for complete procedures, torque specifications, and wiring diagrams.

The Obsidian Take

The 447671 is Baja Designs' complete LP6 Pro solution for the Wrangler JL and Gladiator JT on the OEM steel bumper — tested specifically on the Rubicon steel bumper to eliminate installation guesswork. The LP6 Pro brings three lighting modes (high, low, and amber DRL backlighting), Direct Ducted Cooling for sustained thermal performance, and IPT peripheral lighting that fills the 200-degree spread beyond what the main 6-LED forward beam covers. The toggle harness is pre-designed to work with factory upfitter systems and sPOD or Switch Pros units, which makes this a natural companion to the sPOD kits in this catalog. The DT06-4S Deutsch connector is the one detail to confirm against existing wiring before the kit arrives.

This Product Is For You If

• You own a 2018–2026 Jeep Wrangler JL or 2020–2026 Gladiator JT with the OEM steel bumper.
• You want LP6 Pro pods with High/Low beam, amber DRL backlighting, and IPT peripheral lighting in one kit.
• You are running a factory upfitter system, sPOD unit, or Switch Pros unit and want a wiring setup designed to integrate with those systems.
• You want a tested, bumper-specific kit with all necessary hardware included.

This Product Is Not For You If

• Your Jeep has an aftermarket bumper — OEM steel bumper only.
• Your vehicle is not a 2018–2026 Wrangler JL or 2020–2026 Gladiator JT.
• You need an upfitter-specific harness variant rather than toggle — confirm harness requirements with Baja Designs before ordering.
• Your existing wiring uses a connector other than DT06-4S Deutsch and you have not confirmed adapter compatibility.

Product Family Reference

The LP6 Pro pod is also available individually as SKU 270003 for custom installations.

Common Questions

Does this fit aftermarket bumpers?
No. This kit is designed and tested for the OEM steel bumper on the Wrangler JL and Gladiator JT. Aftermarket bumper fitment is not supported.

Do I need an sPOD or Switch Pros unit to use this kit?
No. The toggle harness operates independently. However, the wiring is specifically designed to integrate with factory upfitter systems, sPOD units, and Switch Pros units if present in your build.

What are the three lighting modes?
High Beam, Low Beam, and Amber Daytime Running Light backlighting. All three modes are controlled through the included kit harness.

What is Integrated Peripheral Technology (IPT)?
IPT uses 4 dedicated LEDs to project 1,972 lumens of peripheral lighting around the main forward beam, extending the usable light spread to 200 degrees.

What is Direct Ducted Cooling (DDC)?
DDC allows air to travel through the front of the LP6 Pro housing and over the rear heat sinks, improving cooling capacity and sustained performance under high-output use.

What connector does the LP6 Pro use?
The LP6 Pro uses a DT06-4S Deutsch terminal connector. Confirm connector compatibility if integrating with existing wiring before ordering.

What is the warranty?
Baja Designs provides a Limited Lifetime Warranty and a 30-Day Money Back Satisfaction Guarantee.

Manufacturer Data Disclaimer

Fitment, specification, included-component, and installation data for this kit are sourced from Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.

Required Legal, Warning, Fitment, and Return Notices

Off-Road Use Notice: Some lighting configurations and outputs may not be legal for use on public roads. Buyer is responsible for compliance with all applicable laws, regulations, and vehicle safety guidelines regarding auxiliary lighting use.

California Proposition 65 Warning: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.

Warranty Summary: Baja Designs provides a Limited Lifetime Warranty against defects in materials and workmanship, along with a 30-Day Money Back Satisfaction Guarantee. Full warranty terms are available at BajaDesigns.com.

Return Policy: Baja Designs provides a 30-day satisfaction guarantee from the invoice date. To initiate any return or exchange, a Return Authorization (RMA) number must be obtained before shipping — returns received without an RMA number will not be processed. Return shipping is the buyer's responsibility. Baja Designs is not responsible for items lost or damaged in transit. A 15% restocking fee applies to items returned after 30 days from the invoice date, items with installation or mounting damage, items not in original packaging or not in 100% sellable condition, and items damaged by poor packaging. Exchanges for unused items are accepted within 90 days of the invoice date for one-to-one replacements of the same product only — a different color of the same product is acceptable; different products, upgrades, or substitutions are not eligible. Refunds are applied to the original payment method within 7–10 business days of Baja Designs receiving the returned goods.