Baja Designs LP6 LED Light Kit | Jeep JL Wrangler 2018–2026 / JT Gladiator 2020–2026 | Rubicon Steel Bumper | Upfitter | SKU: 447671UP

The Baja Designs LP6 Upfitter Kit (447671UP) is a complete, direct-fit LED fog and driving light kit for 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT equipped with the factory Rubicon steel front bumper and the factory Upfitter switch bank. The LP6 mounts directly into the factory Rubicon steel bumper light pockets — no cutting, no drilling, no fabrication. The Upfitter harness connects plug-and-play to the factory Jeep Upfitter switch bank for clean OEM-style switch control.

Two confirmations required before ordering. This kit will not install correctly without both: the factory Rubicon steel front bumper with integrated light pockets, and the factory Upfitter switch bank. If your JL or JT has the Rubicon steel bumper but no Upfitter switches, order 447671 instead. If your JL or JT does not have the Rubicon steel bumper at all, this kit has no mounting location regardless of wiring.

This kit does not fit the JK — different bumper and platform entirely.

Component Specifications

What Is and Is NOT Included

Critical Compatibility

This kit requires two confirmed prerequisites before ordering. Missing either one means this kit will not install correctly.

Prerequisite 1 — Factory Rubicon steel bumper with integrated light pockets: This kit mounts to the fog light pockets on the factory Rubicon steel front bumper only. JL and JT Sport, Sahara, and Willys models use a plastic bumper without light pockets — this kit will not fit. Confirm your trim level and bumper configuration before ordering.

Prerequisite 2 — Factory Upfitter switch bank: The included harness connects to the Jeep factory Upfitter switch bank. If your JL or JT is not equipped with the Upfitter switch panel, this harness has nothing to connect to. If you have the Rubicon steel bumper but no Upfitter switches, order 447671.

Bumper or Upfitter confirmation needed? Text (469) 407-7538 before ordering.

Upfitter vs. Standard Wiring — Which Kit Do You Need?

LP6 vs. S2 Sport / Squadron Sport

Installation Notes

Rubicon steel bumper confirmation is mandatory before ordering. This kit mounts to the light pockets on the factory Rubicon steel front bumper only. Pull your window sticker or build sheet and confirm Rubicon trim with factory steel bumper. If your JL or JT does not have the factory Rubicon steel bumper, this kit has no mounting location.

Aftermarket bumper owners must verify before ordering. If you have replaced the factory bumper with an aftermarket steel bumper, LP6 mount compatibility depends on whether the bumper replicates the factory Rubicon light pocket dimensions. Confirm with your bumper manufacturer before ordering.

Upfitter switch confirmation is mandatory before ordering. The included harness is plug-and-play for the Jeep factory Upfitter switch bank. If your JL or JT is not equipped with the Upfitter switch panel, this harness will not connect. Confirm your build sheet shows the Upfitter switch option before ordering — if not equipped, order 447671.

Upfitter harness routing. Route the harness per Baja Designs installation instructions. Confirm Upfitter switch assignment before finalizing wiring connections.

Aim before final torque. Set the LP6 beam angle at your intended aim point before fully torquing mount hardware.

Road legality. Auxiliary lighting regulations vary by state. Verify compliance with your state DMV or DOT before on-road use.

Text (469) 407-7538 to confirm bumper compatibility or Upfitter configuration before ordering.

The Obsidian Take

The LP6 Upfitter kit is the correct choice for a Rubicon JL or JT owner who has the factory steel bumper and the factory Upfitter switch bank and wants maximum forward illumination with clean OEM-style switch integration. The LP6 is a larger, higher-output pod than the S2 Sport or Squadron Sport — it fills the Rubicon bumper pockets the way they were designed to be filled, and the Upfitter harness means the lights are controlled from the factory switch panel without running additional switches.

If you have the Rubicon steel bumper but no Upfitter switch bank, order 447671 — same mounting solution, conventional relay harness, no Upfitter integration required.

If you do not have the factory Rubicon steel bumper, this kit has no mounting location regardless of wiring variant. It does not fit plastic bumpers and aftermarket bumper compatibility must be confirmed before ordering.

Both prerequisites in place — the LP6 Upfitter kit is a complete bolt-in with factory-level switch integration and output that matches the bumper it was built for.

Common Questions

How do I confirm my JL or JT has the Rubicon steel bumper?
Check your window sticker or build sheet for Rubicon trim designation. Rubicon models come standard with the factory steel front bumper with integrated light pockets. Sport, Sahara, and Willys models use a plastic bumper. Text (469) 407-7538 if you need help confirming before ordering.

How do I confirm my Jeep has the Upfitter switch bank?
Check your build sheet or window sticker for the Upfitter switch option. The Upfitter switch bank is a factory option — not all JL and JT models are equipped. If you are unsure, text (469) 407-7538 and we will confirm before you order.

What is the difference between 447671UP and 447671?
447671UP includes the Upfitter switch bank harness for plug-and-play integration with the factory Jeep Upfitter switch panel. 447671 includes a conventional relay harness for use with an included or aftermarket switch. Both kits include the same LP6 lights and Rubicon steel bumper-specific mounting brackets.

My Jeep has an aftermarket bumper — will this kit fit?
Not confirmed. LP6 mount compatibility with aftermarket bumpers depends on whether the bumper replicates the factory Rubicon light pocket dimensions. Confirm with your bumper manufacturer before ordering.

Does this fit the JK?
No. The JK uses a different bumper and platform configuration entirely. This kit is specific to the JL Wrangler and JT Gladiator Rubicon steel bumper.

Is auxiliary lighting legal on public roads?
Auxiliary lighting regulations vary by state. Verify compliance with your state DMV or DOT before on-road use.

Verified Fitment