Baja Designs LP6 LED Light Kit | Jeep JL Wrangler 2018–2026 / JT Gladiator 2020–2026 | Rubicon Steel Bumper | Standard Wiring | SKU: 447671

The Baja Designs LP6 LED Light Kit (447671) is a complete, direct-fit fog and driving light kit for 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT equipped with the factory Rubicon steel front bumper. The LP6 mounts directly into the factory Rubicon steel bumper light pockets — no cutting, no drilling, no fabrication. This is the standard wiring variant, controlled via a conventional relay and switch setup. If your Jeep has the factory Upfitter switch bank and you want integrated OEM-style switch control, order 447671UP instead.

This kit requires the factory Rubicon steel front bumper. JL and JT Sport, Sahara, and Willys models use a plastic bumper without light pockets — this kit will not fit. Confirm your bumper before ordering.

Component Specifications

What Is and Is NOT Included

Critical Compatibility

Bumper or wiring variant question before you order? Text (469) 407-7538.

Standard vs. Upfitter Wiring — Which Kit Do You Need?

Installation Notes

Rubicon steel bumper confirmation is mandatory before ordering. This kit mounts to the fog light pockets on the factory Rubicon steel front bumper only. Pull your window sticker or confirm your trim level before ordering — if your JL or JT does not have the factory Rubicon steel bumper, this kit has no mounting location.

Aftermarket bumper owners must verify before ordering. This kit is designed for the factory Rubicon steel bumper light pockets. Compatibility with aftermarket bumpers depends on whether the bumper replicates the factory LP6 pocket dimensions — confirm with your bumper manufacturer before ordering.

Wiring variant confirmation. If your Jeep has the factory Upfitter switch bank and you want to control the LP6 lights via those switches, order 447671UP. The standard harness in this kit does not connect to the Upfitter switch bank.

Aim before final torque. Set the LP6 beam angle at your intended aim point before fully torquing mount hardware.

Road legality. Auxiliary lighting regulations vary by state. Verify compliance with your state DMV or DOT before on-road use.

Text (469) 407-7538 to confirm bumper compatibility or wiring variant before ordering.

The Obsidian Take

The LP6 kit is the correct choice for a Rubicon JL or JT owner who wants maximum forward illumination out of the factory bumper light pockets with a bolt-in solution. The LP6 is a larger, higher-output pod than the S2 Sport or Squadron Sport — it fills the Rubicon bumper pockets the way they were designed to be filled, with output that matches the size of the pod.

If you do not have the factory Rubicon steel bumper, this kit has no mounting solution — it does not fit plastic bumpers and aftermarket bumper compatibility must be confirmed before ordering. This is not a universal kit.

If you have the Rubicon bumper and the factory Upfitter switch bank and want clean OEM-style switch integration, order 447671UP — the standard harness in this kit will not connect to those switches.

Factory bumper, bolt-in brackets, relay harness in the box — the LP6 kit is the complete solution for the Rubicon owner who wants the output the bumper was designed to handle.

Common Questions

How do I confirm my JL or JT has the Rubicon steel bumper?
Check your window sticker or Monroney label for Rubicon trim designation. Rubicon models come standard with the factory steel front bumper with integrated fog light pockets. Sport, Sahara, and Willys models use a plastic bumper without these pockets. Text (469) 407-7538 if you need help confirming before ordering.

My Jeep has an aftermarket bumper — will this kit fit?
Not confirmed. This kit is designed for the factory Rubicon steel bumper light pockets. If your aftermarket bumper replicates those pocket dimensions, it may fit — but you must confirm with your bumper manufacturer before ordering.

My Jeep has Upfitter switches — do I need a different kit?
Yes. If your Jeep has the factory Upfitter switch bank and you want integrated control through those switches, order 447671UP. The standard harness in this kit does not connect to the Upfitter switch bank.

Does this fit the JK?
No. This kit is specific to the JL and JT Rubicon steel bumper configuration. The JK uses a different bumper and mounting setup.

Is auxiliary lighting legal on public roads?
Auxiliary lighting regulations vary by state. Verify compliance with your state DMV or DOT before on-road use.

Verified Fitment