Axiom Supply Sway Bar End Link Kit | Integrated Clevis Mount | 4-6" Front Lift | Factory Sway Bar Location | 2001-2019 GM 2500HD/3500HD | SKU AXGMEL46
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The Axiom Sway Bar End Link Kit (SKU AXGMEL46) is an extended-length end link kit for 2001–2019 Chevrolet Silverado 2500HD/3500HD, GMC Sierra 2500HD/3500HD, and Hummer H2 trucks running a 4"–6" front lift kit while keeping the sway bar in its factory location. Factory GM end links are a known weak point — lifting the truck increases the angle and stress placed on the end links, leading to premature wear or failure. These links feature an integrated lower clevis mount and reinforced hardware specifically engineered to reduce angular load throughout suspension travel. Links measure 11 inches center-to-center — approximately 5 inches longer than stock — restoring proper sway bar geometry for safer, more controlled suspension movement. Particularly beneficial on trucks running oversized tie rods or upgraded steering. Sold as a complete kit (both sides). Covers GMT800/GMT900 (2001–2010) and K2XX (2011–2019) platforms.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | AXGMEL46 |
| Brand | Axiom Supply |
| Type | Extended sway bar end link kit — integrated clevis design |
| Lift Range | 4"–6" front lift |
| Center-to-Center Length | 11" (+5" over stock) |
| Sway Bar Position Requirement | Factory location only |
| Quantity | Complete kit (both sides) |
| Construction | Heavy-duty metal — reinforced hardware, corrosion-resistant finish |
| Price | $104.99 |
| Application | Mid-lift GM HD builds — towing, hauling, off-road, oversized tie rods |
| Sold As | Kit |
What Is and Is NOT Included
| Item | Included |
|---|---|
| Complete extended end link kit (left and right) | ✓ |
| Integrated lower clevis mount | ✓ |
| Reinforced mounting hardware | ✓ |
| Compatibility with relocated/dropped sway bars | ✗ NOT confirmed — designed for factory sway bar location |
Sway Bar End Link Selection Guide — Confirm Your Lift Height
| Lift Range | Center-to-Center Length | SKU | Price |
|---|---|---|---|
| Stock height to 2" | Stock-equivalent | AXGMEL02 | $89.99 |
| 4"–6" (this listing) | 11" (+5" over stock) | AXGMEL46 | $104.99 |
| 7"–9" | 14.25" (+8.25" over stock) | AXGMEL79 | $109.99 |
All tiers require the sway bar to remain in its factory mounting position — confirm with us if you've installed a sway bar relocation kit.
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Chevrolet Silverado 2500HD/3500HD | 2001–2019 | ✓ — running 4"-6" front lift |
| GMC Sierra 2500HD/3500HD | 2001–2019 | ✓ — running 4"-6" front lift |
| Hummer H2 | 2001–2019 (confirm exact years) | ✓ |
| Silverado/Sierra 2500HD/3500HD | 2020 and newer | ✗ T1XX platform — different SKU required |
| Silverado/Sierra 1500 | Any | ✗ Different platform |
| Trucks with less than 4" of front lift | — | ✗ Use AXGMEL02 instead |
| Trucks with more than 6" of front lift | — | ✗ Use AXGMEL79 instead |
Critical Compatibility
| Configuration | Notes |
|---|---|
| Sway bar relocated/dropped from factory position | Confirm with us before ordering — this kit is designed for the factory sway bar location |
| Front lift outside the 4"-6" range | Use AXGMEL02 (under 4") or AXGMEL79 (over 6") instead — incorrect length places the sway bar at an improper angle |
| 2020 and newer GM HD trucks | Different platform — confirm the correct SKU |
| Mismatched end link condition left/right | Replace both sides simultaneously to maintain equal sway bar leverage |
Common Questions
Why can't I use the stock-length end links at 4-6" of lift?
At this lift range, factory-length end links operate at a steep angle that reduces sway bar effectiveness and accelerates wear. The 11" center-to-center length of this kit restores the correct operating geometry.
Does this work if I've installed a sway bar drop kit?
Confirm with us first. This kit is designed for trucks that keep the sway bar in its factory mounting position — if you've relocated the sway bar, a different geometry solution may be needed.
Does this fit my Hummer H2?
Yes, confirmed for the same general year range as the Silverado/Sierra HD platform.
What if my lift is outside the 4-6" range?
Order AXGMEL02 for under 4" of lift, or AXGMEL79 for 7"-9" of lift.
The Obsidian Take
The AXGMEL46 is for the 2001-2019 Silverado/Sierra 2500HD/3500HD or Hummer H2 owner running a 4"-6" front lift who needs the sway bar end links extended to match the new geometry — integrated clevis mount, reinforced hardware, 11" center-to-center, complete kit for both sides.
The one thing that matters most: this kit assumes your sway bar is still in its factory location. If you've already installed a relocation/drop kit, confirm with us whether this is still the right geometry match before ordering.
Non-Returnable Notice: Once installed, this kit is non-returnable. Confirm exact lift height and sway bar mounting position before ordering.
Manufacturer Data Disclaimer: Specifications sourced from Axiom Supply and authorized distributor documentation. Obsidian Forged Auto Supply is an authorized Axiom Supply dealer. Manufacturer specifications are subject to change without notice.