AMP Research PowerStep Running Boards — Jeep Wrangler JK 2-Door SKU: 75121-01A
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
Verified Fitment
| Make | Model | Model Year | Configuration | Confirmed Engine |
|---|---|---|---|---|
| Jeep | Wrangler JK | 2018 | 2-Door | 3.6L V6 |
This SKU is confirmed for the 2018 Jeep Wrangler JK, 2-Door, 3.6L V6. Other Wrangler JK model years and the 4-Door (Unlimited) configuration are not confirmed in the supplied source data for this SKU. Verify your exact configuration against the current AMP Research application guide before ordering.
Rubicon Edition note: Rubicon-equipped vehicles with factory rock rails must have the OE rock rails removed before installation.
Component Specifications
| Attribute | Specification |
|---|---|
| Brand | AMP Research (a RealTruck company) |
| Step type | Single-motor power-retracting step |
| Step material | Die-cast aluminum |
| Step width | 6 inches |
| Step length | Cab length |
| Step finish | Military-grade black PTFE coating; textured black powder coat |
| Step mount | Mounts to vehicle's rocker panel |
| Hinge pins | Stainless steel |
| Lighting | Low-profile integrated LED courtesy lights; illuminate on deployment |
| Electrical connection | Direct wiring (without Plug-N-Play OBD-II module — see note below) |
| Manual override | Optional Override Switch, sold separately |
| Warranty | 5-year limited warranty |
Electrical connection note: This application is listed as W/O Plug-N-Play. This kit does not use an OBD-II Plug-N-Play module. The electrical connection uses direct wiring specific to this vehicle application.
What Is and Is NOT Included
Included:
- Pair of vehicle-specific PowerStep running board assemblies
- Vehicle-specific mounting kit (brackets, hardware, wiring accessories, motors)
- Vehicle-specific installation guide
Not included:
- OBD-II Plug-N-Play module (this application does not use one)
- Override Switch for manual control (sold separately)
- OE Rubicon rock rails are not replaced by this kit; removal of those rails is the owner's responsibility if equipped
Critical Compatibility
- Confirmed application: 2018 Jeep Wrangler JK, 2-Door, 3.6L V6.
- The 4-Door Wrangler JK (Unlimited) is not confirmed for this SKU.
- Rubicon Edition vehicles equipped with factory rock rails require removal of the OE rock rails before installation.
- No drilling required for installation.
- This application does not include or use an OBD-II Plug-N-Play module; wiring is direct.
- Confirm your exact configuration against the current AMP Research application guide before ordering.
Installation Notes
- No drilling required for this application.
- Rubicon Edition: remove factory OE rock rails before beginning installation.
- Includes a vehicle-specific installation guide and mounting kit with all required brackets, hardware, wiring accessories, and motors.
- This kit does not use an OBD-II Plug-N-Play module; wiring is direct for this application.
- Professional installation is recommended. Experienced DIYers can install at home; consult the vehicle-specific installation guide included with the kit for the confirmed tool list and estimated installation time for this application.
The Obsidian Take
The PowerStep gives 2018 Jeep Wrangler JK 2-Door owners a single-motor power-retracting step that deploys automatically when a door opens and tucks back under the rocker panel when the door closes — with no drilling required on this application, and no OBD-II module involved. The direct-wiring configuration is specific to the Wrangler JK platform. Rubicon owners need to pull the factory rock rails before the kit can mount; that removal is required and not included in the kit. This is the standard PowerStep — one motor per side — suited to owners who want automatic deployment and clean looks over the dual-motor heavy-duty build of the PowerStep XTreme.
This Product Is For You If
- You own a 2018 Jeep Wrangler JK, 2-Door, 3.6L V6 (confirmed application).
- You want power-retracting steps that deploy automatically and retract out of sight when not in use.
- You want a no-drill installation.
- You want integrated LED lighting on deployment.
- If Rubicon-equipped, you are prepared to remove the factory OE rock rails before installation.
This Product Is Not For You If
- Your vehicle is not a 2018 Jeep Wrangler JK, 2-Door.
- Your vehicle is the 4-Door Wrangler JK (Unlimited) — that configuration is not confirmed for this SKU.
- You have a Rubicon Edition and are not prepared to remove the factory OE rock rails.
- You need dual-motor durability for extreme environments — see the AMP Research PowerStep XTreme.
Common Questions
Does this fit the 4-Door Wrangler JK (Unlimited)?
The confirmed application for this SKU is the 2-Door Wrangler JK only. The 4-Door (Unlimited) is not confirmed. Verify with the current AMP Research application guide before ordering.
Does my Rubicon need any special preparation?
Yes. Rubicon Edition vehicles equipped with factory OE rock rails must have those rails removed before installation. The kit does not replace the rock rails.
Does installation require drilling?
No. This application requires no drilling.
Does this use an OBD-II Plug-N-Play module?
No. This application uses direct wiring, not an OBD-II Plug-N-Play module.
Is this the same as the PowerStep XTreme?
No. This is the standard PowerStep with a single-motor design per side. The PowerStep XTreme features a dual-motor design per side for extreme environments.
Can I add manual override control?
Yes, with an optional Override Switch sold separately by AMP Research.
How do I clean and maintain the PowerStep?
Manually deploy the boards by opening the door, placing your foot on the step, and closing the door while holding pressure. Pressure-wash the four hinge points, avoiding direct spray on the motors. After washing, apply silicone spray lubricant only to the four linkage arms and all pivot pins, then cycle a door to work it into the hinge points. Do not apply wax, protectants such as Armor All, grease, oil, WD-40, or other penetrants. Do not apply silicone, wax, or protectants to the running board step surface.
What is the warranty?
A 5-year limited warranty, subject to the exclusions listed below.
Manufacturer Data Disclaimer
Fitment, specification, included-component, and installation data for this product are sourced from AMP Research/RealTruck manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.
Required Legal, Warning, Fitment, and Return Notices
California Residents: Prop 65 Warning.
Warranty Summary: AMP Research provides a 5-year limited warranty, non-transferable, covering defects in materials or workmanship on properly installed AMP Research products, effective from the date of purchase. The warranty expires if the product is removed from the original vehicle or if the original vehicle is transferred to another owner. This warranty does not cover damage, defect, or malfunction caused by misuse, abuse, accident, improper installation, modification, improper or inadequate maintenance, or on-road/off-road hazards. Incidental and consequential damages are not recoverable under this warranty. During the warranty period, AMP Research will, at its option, repair or replace any defective product at no additional charge; the buyer is responsible for any labor charges associated with removal or reinstallation. If a specific product has been discontinued, AMP Research may replace it with a current product of comparable function and value.