sPOD SourceLT Genesis Kit | Red LED | 6-Circuit + G-Screen Slot | 2009-2018 Jeep Wrangler JK | SKU 873155

The sPOD SourceLT Genesis Kit (SKU 873155) is the vehicle-specific 6-circuit solid-state power management system for the 2009–2018 Jeep Wrangler JK and JK Unlimited with a Red LED Genesis adapter switch panel. The Genesis panel includes a reserved slot for the Genesis Offroad G-Screen dual battery monitor — the right kit for JK builds running or planning a Genesis Offroad dual battery system. Battery harness and mounting hardware engineered for the late JK's PDC layout. Single CAT-6 cable into the cab. No wires cut, no factory circuits tapped. Operates on 12V DC. Red LED — maximum night vision preservation for dedicated trail and off-road builds.

If your JK is 2007 or 2008, this kit does NOT fit. If you are not running a Genesis Offroad dual battery system and do not need the G-Screen slot, order 873010 equivalent for the JK platform and save $15.

Component Specifications

Genesis vs. Non-Genesis — G-Screen Slot or Not

The Genesis adapter is the switch panel format with a reserved 1-inch circular slot for the Genesis Offroad G-Screen. If you have a Genesis Offroad dual battery kit, the G-Screen drops into the slot for integrated dual battery voltage monitoring. If you are not running Genesis Offroad hardware, the slot remains empty — order the non-Genesis Red LED JK kit and save $15.

Genesis Panel — What It Is and What It Does

The Genesis adapter panel functions identically to the standard SourceLT switch panel — 6 circuits, same MOSFET control, same Bluetooth app, same LVCO protection — with one addition: a reserved 1-inch slot sized to accept the Genesis Offroad G-Screen dual battery monitor. The G-Screen is sold separately by Genesis Offroad. If you are not running a Genesis dual battery system, the slot remains empty and the sPOD system operates identically.

Late JK Genesis Panel Color Selector

All Genesis kits are identical in circuit count, amp rating, features, and Genesis panel format. Color refers to LED switch illumination only.

Kit Contents

• sPOD SourceLT solid-state module (6-circuit)
• Red LED Genesis adapter switch panel with reserved G-Screen slot
• Late JK-specific battery harness (hi-strand crosslinked copper, silicone jacket, nylon braid)
• 10-ft CAT-6 Ethernet controller cable
• Vehicle-specific mounting hardware
• All required installation hardware

Note: Genesis Offroad G-Screen is NOT included. The panel includes the slot to accept it. Order the G-Screen separately from Genesis Offroad if dual battery monitoring is required.

Verified Fitment

Critical Compatibility — Does NOT Fit

FITMENT: 2009–2018 late JK only. Confirm model year via VIN before ordering. Questions? Text (469) 407-7538.

Common Questions

What exactly does the Genesis adapter do? The Genesis adapter is the switch panel format that includes a reserved 1-inch circular slot for the Genesis Offroad G-Screen dual battery monitor. The sPOD system operates identically with or without the G-Screen installed. If you have a Genesis Offroad dual battery kit, the G-Screen drops into the slot for integrated dual battery voltage monitoring and remote boost capability. If you do not, the slot remains empty — order the non-Genesis kit and save $15.

Why Red LED for a trail JK? Red light sits at the far end of the visible spectrum and causes the least pupil contraction — your eyes stay dark-adapted when you look away from the panel. This is the traditional standard for cockpit lighting in any application where sustained night vision matters. For a JK running dark canyon roads, backcountry routes, or technical trails at night, Red is the correct panel color. For a daily driver, Blue or Green is more practical for daytime switch-state readability.

How do I confirm my JK is 2009 or later? Check the 10th character of your VIN: 9 = 2009, A = 2010, B = 2011, C = 2012, D = 2013, E = 2014, F = 2015, G = 2016, H = 2017, J = 2018. If the 10th character is 7 or 8, order the early JK Genesis Red LED kit instead.

Does installation require cutting factory wires? No. The SourceLT module connects directly to the battery via the included late JK-specific harness. A single CAT-6 cable runs from the module to the switch panel. No factory circuits are tapped, no wires are cut.

Can I expand beyond 6 circuits later? No. The SourceLT is a closed 6-circuit system with no expansion path. If there is any chance you need more circuits, order a BantamX JK kit now.

The Obsidian Take

The SourceLT Genesis Kit (873155) is for the 2009–2018 JK trail runner who wants 6 circuits of clean, fuse-free accessory power with Red LED panel illumination and a built-in G-Screen slot for when the Genesis Offroad dual battery system gets added. Red is the night-vision choice — maximum dark adaptation preservation on extended trail runs.

If you are not running Genesis hardware and never plan to, skip the Genesis panel and save $15. If Genesis dual battery monitoring is part of the build, this panel is the right foundation from day one.

Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.

Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your VIN, window sticker, or door jamb label before ordering. Manufacturer specifications are subject to change without notice.