sPOD Red LED SourceLT Kit | 6-Circuit Solid-State | 2012-2017 Toyota Tundra (2nd Gen) | 873010

Is This for You?

You're building a 2012–2017 Toyota Tundra (2nd Generation) and need a 6-circuit solid-state power management system with a Red LED switch panel — high-visibility control that also preserves night vision better than blue or white LED panels during trail and off-road driving.

If you have a 2022–2026 Toyota Tundra (3rd Gen), this kit does NOT fit — different platform. For 3rd-gen Tundra, see the Mini6 SourceLT Kit (870091) or BantamX vehicle kits (870089, 870090). If you prefer a different panel color for the 2nd-gen Tundra, see the Blue LED kit (873020, same price).

The Result

Six solid-state circuits — no relays, no fuses, no relay failures. Red LED switch panel for high-visibility in-cab control with better night vision preservation than blue or white panels. Clean wiring, reduced heat load, programmable circuit behavior on the 2nd-gen Tundra platform.

2nd-Gen Tundra SourceLT — Panel Color Options

• 873010 — Red LED — 2012–2017 Tundra — $590.00 (this listing): Night vision-friendly, high-visibility.
• 873020 — Blue LED — 2012–2017 Tundra — $590.00: High-contrast visibility. Same price.

Solid-State Power Management — No Relays, No Fuses

• No relays — eliminates relay failure, relay noise, and relay heat load
• No fuses — solid-state overcurrent protection replaces traditional fuse-based protection
• Reduced heat load — runs cooler than relay-based systems
• Stable output — consistent power delivery for lighting, compressors, pumps, and electronics
• Weather-resistant — connectors and housing rated for off-road and outdoor exposure

Programmable Circuit Behavior

• Standard on/off — latching control
• Momentary — circuit active only while switch is held
• Strobe — programmable strobe pattern for warning lights
• Dimming — variable output for dimmable lighting accessories

Verified Fitment (OFAS Standard)

Toyota Tundra — 2012–2017 (2nd Generation)

• Trims: SR, SR5, Limited, Platinum, 1794 Edition, TRD Off-Road, TRD Pro
• CrewMax, Double Cab, Regular Cab — confirm cab configuration before ordering

• 2022–2026 Toyota Tundra (3rd Gen) — does NOT fit ✗ — see 870091, 870089, 870090
• 2007–2011 Toyota Tundra — confirm compatibility before ordering ⚠️
• Toyota Tacoma, 4Runner, or other Toyota platforms — does NOT fit ✗

System Specifications

• Part Number / SKU: 873010
• Brand: sPOD
• System: Red LED SourceLT Power Management Kit
• Circuits: 6 independently switched
• Switching Technology: Solid-state (no relays, no fuses)
• Switch Panel: Red LED
• Programmable Modes: On/off, momentary, strobe, dimming
• Weather Resistance: Weather-resistant connectors and housing
• Weight: 5.0 lb
• Country of Origin: USA
• Warranty: 5-year manufacturer warranty
• Sold As: Complete kit

Kit Components

• sPOD SourceLT solid-state power management module
• Red LED switch panel
• All required installation hardware

Installation Notes

• Confirm 2nd-gen platform. Fits 2012–2017 Tundra (2nd Gen) only. 2022–2026 3rd-gen does not fit.
• Verify mounting locations. Confirm mounting location for both the Red LED panel and the SourceLT module before installation.
• Professional installation recommended. Electrical integration requires a qualified automotive electrician.
• Verify accessory load. Calculate total amperage draw per circuit before programming.

Engineering Question: Red LED on a Tundra build — the right call for trail driving where night vision matters. Red light sits at the far end of the visible spectrum and causes the least pupil contraction, keeping your eyes adjusted to low-light conditions. If your Tundra is a dedicated off-road or overland rig running dark trails, Red LED is the technically correct panel color. For a daily driver, Blue (873020) gives you better daytime switch-state visibility.