sPOD Fender Mount Bracket | BantamX & SourceLT | Jeep Wrangler JL / Gladiator JT | 2018-2026 | SKU 910740

The sPOD Fender Mount Bracket (SKU 910740) is the vehicle-specific inner fender mounting bracket for the BantamX or SourceLT power management module in the 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT. Bolt-on installation using factory mounting locations — no drilling, no modifications, no fabrication. High-grade steel with black powder-coated finish. Bracket only — BantamX and SourceLT module not included.

This bracket does NOT fit the JK Wrangler (2007–2018). For the JK, order SKU 910315.

Specifications

What Is and Is NOT Included

Fender Mount vs. Other Bracket Options — JL/JT

Choose 910740 for a vehicle-specific inner fender mount in the JL or JT. Choose a universal bracket if you want to mount in a custom location outside the inner fender position.

Verified Fitment

Critical Compatibility

Common Questions

Does this bracket require drilling into the JL or JT engine bay? No. The bracket uses factory mounting locations along the JL/JT inner fender — bolt-on installation with included hardware. No drilling, no welding, no fabrication required.

Why mount on the inner fender instead of the firewall? Inner fender placement keeps the BantamX or SourceLT module away from direct firewall heat, positions it close to the battery for shorter cable runs, and maintains cleaner harness routing. It also keeps the module accessible for circuit checks and service without reaching deep into the engine bay. Firewall mounting is viable but the fender bracket is the sPOD-designed position for this platform.

What is the cable routing implication of fender mounting vs. other positions? Fender mounting positions the module further from the in-cab switch panel than a firewall or under-dash location. Confirm your Ethernet cable length from the fender mounting position to your switch interface location before ordering the cable. Most JL/JT fender-to-dash runs fall between 10 and 15 feet depending on routing path. Measure before ordering your cable.

Does this bracket work with the Wrangler 392 V8? Yes. The 392 V8 Wrangler uses the same JL platform with the same inner fender architecture. This bracket fits.

The Obsidian Take

The 910740 is the right bracket when you want your BantamX or SourceLT positioned at the inner fender in a JL or JT — factory-fit, bolt-on, no modifications. Powder-coated steel that handles off-road conditions long-term.

One thing to plan before ordering: measure your Ethernet cable run from the fender mount position to your switch interface. Fender placement typically adds cable length versus a firewall mount. Order the correct cable length before you pull the bracket off the shelf.

If you have a JK, order 910315 instead.

Manufacturer Data Disclaimer: Specifications sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify compatibility with your specific BantamX or SourceLT module variant before ordering. Manufacturer specifications are subject to change without notice.