sPOD HD BantamX Kit | 8-Circuit Power Management | 2019-2023 Mercedes-Benz Sprinter 1500 2500 3500 | 870110

Is This for You?

You're building out a 2019–2023 Mercedes-Benz Sprinter 1500, 2500, or 3500 (3rd Gen, VS30 platform) and need a dedicated 8-circuit power management system for lighting, compressors, inverters, refrigeration, cameras, and other van build or commercial upfitter electronics. You want a vehicle-specific kit — not a universal wiring solution — with a 5-year manufacturer warranty.

If you have a 2018 or earlier Sprinter (2nd Gen, NCV3 platform), this kit does NOT fit. If you have a 2024–2026 Sprinter, verify VS30 platform continuity before ordering — confirm compatibility with sPOD or your installer prior to purchase.

The Result

Eight independently switched, fused circuits consolidated into a single HD BantamX module — organized, protected, and serviceable. Lighting, compressors, inverters, refrigeration, and recovery electronics all managed from one system. Built for the power demands of serious van builds and commercial upfitting on the VS30 Sprinter platform.

Sprinter Van Build Applications

• Lighting — interior LED strips, exterior work lights, scene lights, emergency lighting
• Compressors — on-board air, air suspension, pneumatic tools
• Inverters and power — shore power integration, auxiliary power distribution
• Refrigeration — 12V refrigerators and coolers
• Cameras and electronics — backup cameras, dash cams, communication systems
• Recovery and utility — winches, pumps, and other high-draw accessories

Verified Fitment (OFAS Standard)

• 2019–2023 Mercedes-Benz Sprinter 1500 (3rd Gen, VS30) — fits ✓
• 2019–2023 Mercedes-Benz Sprinter 2500 (3rd Gen, VS30) — fits ✓
• 2019–2023 Mercedes-Benz Sprinter 3500 (3rd Gen, VS30) — fits ✓
• 2018 and earlier Sprinter (2nd Gen, NCV3) — does NOT fit ✗
• Ford Transit, Ram ProMaster, or other van platforms — does NOT fit ✗
• 2024–2026 Sprinter — verify VS30 platform continuity with sPOD before ordering ⚠️

Configuration Note: Wheelbase, roof height, and body style do not affect electrical fitment but may affect mounting location. Confirm your module mounting plan before installation.

System Specifications

• Part Number / SKU: 870110
• Brand: sPOD
• System: HD BantamX — 8-Circuit Power Management Kit
• Circuits: 8 independently switched and fused
• Control Interface: Physical HD switch panel
• Dimensions: 13.0 x 10.0 x 10.0 in
• Weight: 5.0 lb
• Mounting: Hardware included
• Country of Origin: USA
• Warranty: 5-year manufacturer warranty
• Sold As: Each

Kit Components

• sPOD HD BantamX power management module
• HD switch panel
• All required installation hardware

Installation Notes

• Professional installation required. Electrical integration in a van build environment requires a qualified automotive electrician or van conversion specialist.
• Confirm VS30 generation. This kit fits 2019–2023 Sprinter (VS30) only. 2018 and earlier NCV3 platform does not fit.
• 2024–2026 Sprinter. Verify VS30 platform continuity with sPOD before ordering.
• Verify accessory load. Total accessory amperage draw must not exceed system capacity. Map your circuit load before wiring — van builds frequently run high aggregate draw across multiple circuits simultaneously.

Engineering Question: Are you running simultaneous high-draw loads — compressor, inverter, and lighting all at once? Van builds stress power management systems differently than truck builds because multiple circuits fire concurrently during operation. Calculate your peak simultaneous draw against the HD BantamX's capacity before finalizing your circuit map.