sPOD Ethernet Universal Control Cable | 3-Foot | BantamX SourceLT Mini6 Mini4 | 910025

Is This for You?

You have an existing sPOD BantamX, SourceLT, Mini6, or Mini4 system and need a 3-foot Ethernet cable for a short, direct routing path — your module and switch interface are close together but need more than 1 foot of cable reach to route cleanly without stressing the connector.

Cable only — switch panel and power module are NOT included. If 1 foot is sufficient and your components are truly co-located, see SKU 910010 ($7.00). If you need more reach, see the 10-foot (910000, $29.00) or longer options.

The Result

A reinforced, weather-resistant 3-foot Ethernet cable that connects your sPOD power module to your switch interface with a short, clean routing path — enough reach to route properly without excess slack, and signal-stable in harsh off-road and outdoor environments.

sPOD Ethernet Cable Lineup — Choose Your Length

• 910010 — 1-Foot — $7.00: Truly co-located installs only.
• 910025 — 3-Foot — $12.00 (this listing): Short clean routing with proper bend radius.
• 910000 — 10-Foot — $29.00: Standard reach for most installations.
• 910005 — 15-Foot — $35.00: Extended reach for longer routing paths.
• 910015 — 25-Foot — $45.00: Long-distance routing for large builds.
• 910020 — 30-Foot — $59.95: Maximum reach for the largest builds.

Measure your routing distance from power module to switch interface before ordering. Choose the shortest cable that covers your path with proper bend radius at both connectors.

3-Foot Cable — Short-Routing Use Case

• Short direct routing — for builds where 1 foot is too tight but 10 feet creates excess slack
• Proper connector bend radius — 3 feet allows clean routing without stressing the plug at either end
• Reinforced shielding — signal-stable in high-vibration environments
• Weather-resistant construction — rated for off-road and outdoor exposure

Cable Only — What's Included and What's Not

• This IS: A 3-foot Ethernet cable for connecting sPOD power modules to switch interfaces
• This is NOT: A complete kit — switch panel and power module not included

Compatibility

• sPOD BantamX systems — compatible ✓
• sPOD SourceLT systems — compatible ✓
• sPOD Mini6 interfaces — compatible ✓
• sPOD Mini4 interfaces — compatible ✓

Confirm your specific sPOD system and firmware version are compatible before ordering.

Specifications

• Part Number / SKU: 910025
• Brand: sPOD
• Type: Ethernet Control Cable
• Cable Length: 3 feet
• Cable Type: Ethernet (reinforced shielding)
• Weather Resistance: Weather-resistant construction
• Compatibility: BantamX, SourceLT, Mini6, Mini4
• Weight: 1.0 lb
• Warranty: 5-year manufacturer warranty
• Sold As: Each (cable only)

What's Included

• sPOD 3-foot Ethernet control cable
• Switch panel NOT included
• Power module NOT included

Installation Notes

• Verify routing path. 3 feet covers short direct runs. If your path requires more reach, order the 10-foot (910000) or longer.
• Confirm system compatibility. Verify this cable is compatible with your specific sPOD system and firmware version before ordering.
• Professional installation recommended. Electrical integration requires a qualified technician.

Engineering Question: Why 3 feet instead of 1 foot? Connector bend radius. A 1-foot cable between components that are 10 inches apart straight-line may require a tight bend at the plug that stresses the connector housing over time. 3 feet gives you enough slack to route cleanly, loop once for strain relief, and still keep the install tight.