sPOD Blue LED SourceLT Kit | 6-Circuit Solid-State | 2009-2018 Jeep Wrangler JK | 873115

Is This for You?

You have a 2009–2018 Jeep Wrangler JK or JK Unlimited with a single-battery system and need a 6-circuit solid-state power management kit with a Blue LED switch panel. No Genesis dual-battery adapter — this is the standard single-battery configuration at $15 less than the Genesis version.

If you have a dual-battery system and need the Genesis adapter, see the Blue LED Genesis kit (873140, $605.00, $15 more). If you prefer a different panel color without a Genesis adapter, see the Green LED kit (873165, $590.00) or other non-Genesis color options. If you have a 2007–2008 JK or a JL Wrangler, this kit does NOT fit.

The Result

Six solid-state circuits — no relays, no fuses, no relay failures. Blue LED switch panel for high-contrast in-cab control of lighting, compressors, pumps, and electronics on the 2009–2018 JK platform. Clean wiring, reduced heat load, programmable circuit behavior.

Genesis vs. Non-Genesis — Which Do You Need?

• 873115 — Blue LED SourceLT — No Genesis Adapter — $590.00 (this listing): Single-battery JK builds.
• 873140 — Blue LED SourceLT Genesis — Dual-Battery Adapter — $605.00: JK builds with dual-battery systems. $15 more.

If your JK runs a single battery — even a high-capacity AGM or lithium upgrade — this non-Genesis kit is the correct choice. The Genesis adapter is only needed for true dual-battery configurations.

JK Non-Genesis SourceLT Kit — Panel Color Options

• 873115 — Blue LED — 2009–2018 JK — $590.00 (this listing)
• 873165 — Green LED — 2009–2018 JK — $590.00: Same price.
• 873175 — Mini6 Panel — 2007–2018 JK — $595.00: Full JK range including 2007–2008. $5 more.

Solid-State Power Management — No Relays, No Fuses

• No relays — eliminates relay failure, relay noise, and relay heat load
• No fuses — solid-state overcurrent protection replaces traditional fuse-based protection
• Reduced heat load — runs cooler than relay-based systems
• Stable output — consistent power delivery for lighting, compressors, pumps, and electronics
• Weather-resistant — connectors and housing rated for off-road and outdoor exposure

Programmable Circuit Behavior

• Standard on/off — latching control
• Momentary — circuit active only while switch is held
• Strobe — programmable strobe pattern for warning lights
• Dimming — variable output for dimmable lighting accessories

Verified Fitment (OFAS Standard)

Jeep Wrangler JK / JK Unlimited — 2009–2018 (Late JK Only)

• Sport, Sport S, Sahara, Rubicon, Moab, Freedom Edition, Willys Wheeler, 70th Anniversary, 75th Anniversary, X
• 2-door (JK) and 4-door Unlimited (JKU) — both fit ✓

• 2007–2008 Jeep Wrangler JK (Early JK) — does NOT fit ✗
• Jeep Wrangler JL (2018–2026) — does NOT fit ✗
• Jeep Gladiator JT — does NOT fit ✗
• Jeep Wrangler TJ (2003–2006) / LJ (2004–2006) — does NOT fit ✗

System Specifications

• Part Number / SKU: 873115
• Brand: sPOD
• System: Blue LED SourceLT Power Management Kit
• Circuits: 6 independently switched
• Switching Technology: Solid-state (no relays, no fuses)
• Switch Panel: Blue LED
• Genesis Adapter: NOT included — single-battery configuration
• Programmable Modes: On/off, momentary, strobe, dimming
• Weather Resistance: Weather-resistant connectors and housing
• Weight: 5.0 lb
• Country of Origin: USA
• Warranty: 5-year manufacturer warranty
• Sold As: Complete kit

Kit Components

• sPOD SourceLT solid-state power management module
• Blue LED switch panel
• All required installation hardware
• Genesis dual-battery adapter NOT included

Installation Notes

• Single-battery builds only. If your JK has a dual-battery system, order the Blue LED Genesis kit (873140, $15 more) instead.
• Confirm late JK platform. Fits 2009–2018 JK only. 2007–2008 early JK does not fit.
• Verify mounting locations. Confirm mounting location for both the Blue LED panel and the SourceLT module before installation.
• Professional installation recommended. Electrical integration requires a qualified automotive electrician.
• Verify accessory load. Calculate total amperage draw per circuit before programming.

Engineering Question: Do you actually need the Genesis adapter? If your JK runs a single battery — even a 100Ah lithium or Group 34 AGM — the non-Genesis kit (this listing) is correct and saves you $15. The Genesis adapter is specifically for JKs with a factory or aftermarket dual-battery tray and a second battery wired in parallel or with an isolator. If you’re unsure, check under your hood — if there’s only one battery, order this kit.