sPOD BantamX Touchscreen Kit | 8-Circuit In-Cab Touchscreen | 2007-2018 Jeep Wrangler JK | SKU 870035
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
The sPOD BantamX Touchscreen Kit (SKU 870035) is the vehicle-specific 8-circuit solid-state power management system for the 2007–2018 Jeep Wrangler JK with a 3.5-inch TFT LCD touchscreen interface. The touchscreen mounts in the JK cab via vehicle-specific hardware. The BantamX module mounts in the engine bay. A single CAT-6 Ethernet cable connects both. No wires cut, no factory circuits tapped. Expandable to 32 channels. Operates on 12V or 24V DC.
The touchscreen is NOT weatherproof. Mount in a protected interior location only. Water or liquid exposure voids the warranty. The touchscreen becomes inoperable below 20°F — allow the cab to warm up before operation in cold climates.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 870035 |
| Brand | sPOD |
| Product Line | BantamX Touchscreen Vehicle Kit |
| Platform | 2007–2018 Jeep Wrangler JK and JK Unlimited — full year range |
| Number of Circuits | 8 — independently switched |
| Single Circuit Capacity | 30A at 12.5V DC |
| Total System Capacity | 100A |
| System Protection Fuse | 100A in-line fuse |
| System Circuit Breaker | 50A auto-resetting |
| Operating Voltage | 12V DC or 24V DC |
| Control Technology | Current-sensing MOSFETs via microprocessor — no fuses, no relays |
| Fault Protection | Failsafe self-healing circuits; overheating, over-current, short, reverse polarity, field collapse |
| Low Voltage Cutoff (LVCO) | Disconnects at 11.6V (2-min delay); requires 12.8V to reinitialize |
| LVCO Fuse | One ATM mini-style fuse for LVCO protection and reset |
| LVCO Override | Optional override available |
| Expandability | 2 controller ports (RJ45) — expandable to 32 channels via BantamX add-on |
| Terminal Block | 16-position terminal block |
| Input Terminal Block | 8-position input terminal block for controlling outputs |
| Ignition Control | Optional ignition control and safety lockout for circuits 1 and 2 |
| Bluetooth | Built-in sPODConnect — controlled via free sPOD Mobile App (iOS and Android) |
| Software Updates | On-demand wireless OTA updates |
| Controller Cable | 10 ft CAT-6 Ethernet (touchscreen to BantamX module) — extendable to 25 ft |
| Battery Cables | Hi-strand crosslinked copper wire, silicone jacket, nylon braid |
| Touchscreen Display | 3.5-inch LED backlit TFT LCD |
| Touchscreen Resolution | 320 x 240 |
| Touchscreen Colors | 16.7 million |
| Touchscreen Viewing Angle | 180 degrees |
| Touch Technology | Resistive — pressure-activated |
| Touchscreen Weatherproof | No — interior protected mounting only |
| Cold Temperature Limit | Inoperable below 20°F — allow cab to warm before use |
| Module Housing | Powder-coated steel base with silicone gasket weatherproofing, aluminum lid |
| Mounting | Vehicle-specific JK hardware included |
| Shipping Weight | 5.0 lbs |
| Country of Origin | USA |
| Warranty | 5-year manufacturer warranty |
| Sold As | Complete kit |
Touchscreen Interface Features
| Feature | Detail |
|---|---|
| Screen Type | TFT LCD — resistive touchscreen (pressure-activated) |
| Circuit Control | Individual on/off per circuit via touchscreen |
| Circuit Monitoring | Real-time circuit status display |
| Circuit Naming | Customizable labels for each circuit |
| Programmable Functions | Dimming, Strobe, Flash, Momentary, Memory, Switch Linking, Auto Power-Up |
| App Integration | Full sPOD app programmability via Bluetooth in parallel |
| Cold Temperature | Inoperable below 20°F — allow cab temperature to warm before use |
| Weatherproof | No — interior protected location only |
Kit Contents
- sPOD BantamX solid-state module (8-circuit, expandable)
- 3.5-inch TFT LCD touchscreen controller
- 10-ft CAT-6 Ethernet cable (touchscreen to module)
- Vehicle-specific JK mounting hardware
- Battery cable set (hi-strand crosslinked copper, silicone jacket, nylon braid)
- All required installation hardware
JK BantamX System Selector
| SKU | System | Interface | Expandable | Notes |
|---|---|---|---|---|
| 870020 | BantamX HD | Physical HD panel — RGB backlit silicone buttons | Yes — to 32 | Operable by feel, no cold weather limitation |
| 870035 (this listing) | BantamX Touchscreen | 3.5-inch TFT LCD touchscreen | Yes — to 32 | Customizable labels; inoperable below 20°F |
| 870120 | BantamX Wireless | App only — no physical panel | Yes — to 32 | No in-cab panel; app control only |
| 873175 | SourceLT Mini6 | Mini6 silicone-button panel | No | 6-circuit ceiling |
Verified Fitment
| Vehicle | Years | Status |
|---|---|---|
| Jeep Wrangler JK (2-door) — all trims | 2007–2018 | ✓ — full year range |
| Jeep Wrangler JK Unlimited (4-door) — all trims | 2007–2018 | ✓ — full year range |
| Jeep Wrangler JL / JLU | 2018–2026 | ✗ Different platform — order 870025 or JL-specific touchscreen kit |
| Jeep Gladiator JT | 2020–2026 | ✗ Different platform — does not fit |
| Jeep Wrangler TJ / LJ | All years | ✗ Different platform — does not fit |
Critical Compatibility — Does NOT Fit
FITMENT GATE: 2007–2018 JK only. JL does not fit. Questions? Text (469) 407-7538.
| Configuration | Reason |
|---|---|
| Jeep Wrangler JL / JLU — 2018–2026 | Different platform. Order the JL/JT-specific BantamX touchscreen kit instead. |
| 2018 Jeep Wrangler JL | Both JK and JL produced in 2018. Confirm your 2018 Wrangler is a JK before ordering. |
| Jeep Gladiator JT | Different platform. Does not fit. |
| Exterior or exposed touchscreen mounting | NOT weatherproof. Water or liquid exposure voids warranty. Interior protected location only. |
| Cold climate use below 20°F without warmup | Touchscreen becomes inoperable below 20°F. Allow cab temperature to warm before use. |
| Winches and high-draw recovery motors | 30A max per circuit. Wire winches direct to battery through a dedicated relay. |
Common Questions
Touchscreen vs. HD panel — which is right for my JK? Two different use cases. The touchscreen (870035) gives you a customizable labeled screen interface with real-time circuit monitoring — best when your accessory list changes or you want visual system status. The HD panel (870020) gives you tactile silicone buttons you can activate by feel in the dark without looking at the screen — and the HD panel has no cold weather limitation. For a dedicated trail rig running cold weather or night conditions frequently, the HD panel is the more reliable choice. For a daily driver or mixed-use build where configuration flexibility matters, the touchscreen is the better long-term interface.
The touchscreen becomes inoperable below 20°F — how significant is that? In a heated cab that has warmed to operating temperature, this is not a practical limitation for most use cases. The touchscreen responds once the display warms up. In extreme cold where the cab never reaches 20°F — remote start disabled, running doors-off, or operating in sustained sub-zero conditions — the touchscreen will not respond until it warms. If your JK regularly operates in those conditions, the HD panel (870020) has no cold weather limitation.
Does this cover both 2007–2008 and 2009–2018 JK in one SKU? Yes. The BantamX Touchscreen Kit 870035 covers the full 2007–2018 JK range in a single SKU — no early/late platform split.
Does installation require cutting factory wires? No. The BantamX module connects directly to the battery. A single CAT-6 cable runs from the engine bay module to the cab touchscreen. No factory circuits are tapped, no wires are cut.
Can I expand beyond 8 circuits? Yes. The BantamX has two RJ45 controller ports and is expandable to 32 channels via BantamX add-on modules.
The Obsidian Take
The BantamX Touchscreen Kit (870035) is for the 2007–2018 JK owner who wants 8 circuits of clean, fuse-free accessory power behind a customizable 3.5-inch touchscreen — labeled circuits, real-time monitoring, Bluetooth in parallel, full JK year range in one SKU.
Two things that matter before installing. First — the touchscreen is not weatherproof. It goes in a protected interior location, not exposed to the elements. Second — the touchscreen becomes inoperable below 20°F. If the JK runs cold climate trail work frequently, evaluate the HD panel (870020) instead. Outside those two conditions, this kit delivers exactly what it promises.
Non-Returnable Notice: Electrical systems that have been powered and connected to a vehicle are non-returnable. Inspect the kit and confirm fitment before connecting to the battery.
Manufacturer Data Disclaimer: Specifications and fitment data are sourced from sPOD manufacturer documentation. Obsidian Forged Auto Supply is an authorized sPOD dealer. Verify final fitment against your VIN, window sticker, or door jamb label before ordering. Manufacturer specifications are subject to change without notice.