sPOD BantamX Non-Switch Panel Kit | 8-Circuit Solid-State | 84-Inch Cables | Universal | 870115

Is This for You?

You're building a custom off-road, overland, or UTV electrical system and need the BantamX solid-state power module with 84-inch (7-foot) cables — your module mounting location is farther from the switch panel or battery than a 36-inch cable can reach. You already have a compatible sPOD switch panel or plan to use app-based wireless control.

Switch panel is NOT included. If you need a complete kit with a switch panel, this is not the right product. If 36 inches of cable reach is sufficient for your installation, see SKU 870114 ($20 less).

The Result

Eight solid-state circuits with 84-inch (7-foot) cable reach — no relays, no fuses, no relay failures. Stable power delivery for lighting, compressors, pumps, fans, and electronics in builds where the module must be mounted remotely from the control interface.

84-Inch vs. 36-Inch — Choose the Right Cable Length

• 870115 — 84-Inch Cables — $624.95 (this listing): 7-foot reach. For remote module mounting locations.
• 870114 — 36-Inch Cables — $604.95: 3-foot reach. Standard mounting locations. $20 less.

Measure your cable routing path from module to switch panel or control interface before ordering. Choose the length that matches your installation — excess cable is manageable; insufficient cable requires a return.

No Switch Panel Included — What's In This Kit

• Included: BantamX solid-state power module, 84-inch cables, installation hardware
• NOT included: Switch panel — pair with a compatible sPOD switch panel or use app-based control
• Compatible with: sPOD switch panels and sPOD app-based wireless control systems

Solid-State Power Management — No Relays, No Fuses

• No relays — eliminates relay failure, relay noise, and relay heat load
• No fuses — solid-state overcurrent protection replaces traditional fuse-based protection
• Reduced heat load — runs cooler than relay-based systems under sustained high-draw operation
• Consistent output — stable power delivery for lighting, compressors, pumps, fans, and electronics
• Weather-resistant — connectors and housing rated for off-road and outdoor exposure

Programmable Circuit Behavior

• Standard on/off — latching control
• Momentary — circuit active only while switch is held
• Strobe — programmable strobe pattern for warning lights
• Dimming — variable output for dimmable lighting accessories

Verified Fitment (OFAS Standard)

Universal fit for off-road, UTV, overland, and auxiliary electrical systems. Compatible with sPOD switch panels and app-based control. Confirm switch panel or control system compatibility before ordering.

System Specifications

• Part Number / SKU: 870115
• Brand: sPOD
• System: BantamX Non-Switch Panel Power Management Kit
• Circuits: 8 independently switched
• Cable Length: 84 inches (7 feet)
• Switching Technology: Solid-state (no relays, no fuses)
• Switch Panel: NOT included
• Programmable Modes: On/off, momentary, strobe, dimming
• Weather Resistance: Weather-resistant connectors and housing
• Weight: 5.0 lb
• Country of Origin: USA
• Warranty: 5-year manufacturer warranty
• Sold As: Each

What's Included

• sPOD BantamX solid-state power management module
• 84-inch cables
• All required installation hardware
• Switch panel NOT included

Installation Notes

• Switch panel or app control required. This kit does not include a switch panel. Confirm your compatible sPOD switch panel or app-based control system before ordering.
• Professional installation recommended. Electrical integration requires a qualified automotive electrician.
• 84-inch cable routing. Confirm your full cable routing path before installation. 7 feet of reach — plan module placement and routing before you order.
• Verify accessory load. Calculate total amperage draw per circuit before programming.

Engineering Question: Why do you need 84 inches instead of 36? Remote module mounting — firewall to rear cargo area, engine bay to roof rack, or battery-to-module separation in a van or trailer build — all justify the longer cable. Map your exact routing path with a tape measure before committing to either length. Cable management at 7 feet requires planning that 3-foot installs don't.