sPOD Amber LED SourceLT Kit | 6-Circuit Solid-State | 2007-2008 Jeep Wrangler JK (Early JK) | 873100

Is This for You?

You have a 2007–2008 Jeep Wrangler JK or JK Unlimited (early JK platform) and need a 6-circuit solid-state power management kit with an Amber LED switch panel — warm, low-glare visibility that preserves night vision during off-road and trail driving. The early JK (2007–2008) has a different electrical architecture from the late JK (2009–2018) — these kits are not interchangeable.

If your JK is 2009 or later, this kit does NOT fit. See the 2009–2018 Amber LED SourceLT Kit (873105, same price) for the late JK platform. If you have a JL Wrangler (2018–2026), neither JK kit fits.

The Result

Six solid-state circuits engineered for the early JK electrical architecture — no relays, no fuses, no relay failures. Amber LED switch panel for warm, low-glare in-cab control that preserves night vision during extended trail runs on the 2007–2008 JK platform.

Early JK vs. Late JK — Critical Platform Split

The 2007–2008 JK (early) and 2009–2018 JK (late) have different electrical architectures. These kits are not interchangeable. Confirm your model year before ordering.

• 873100 — Amber LED SourceLT — 2007–2008 JK (Early) — $590.00 (this listing): Early JK electrical architecture.
• 873105 — Amber LED SourceLT — 2009–2018 JK (Late) — $590.00: Late JK electrical architecture. Same price.

Solid-State Power Management — No Relays, No Fuses

• No relays — eliminates relay failure, relay noise, and relay heat load
• No fuses — solid-state overcurrent protection replaces traditional fuse-based protection
• Reduced heat load — runs cooler than relay-based systems
• Stable output — consistent power delivery for lighting, compressors, pumps, and electronics
• Weather-resistant — connectors and housing rated for off-road and outdoor exposure

Programmable Circuit Behavior

• Standard on/off — latching control
• Momentary — circuit active only while switch is held
• Strobe — programmable strobe pattern for warning lights
• Dimming — variable output for dimmable lighting accessories

Verified Fitment (OFAS Standard)

Jeep Wrangler JK / JK Unlimited — 2007–2008 (Early JK Only)

• Sport, Sahara, Rubicon, X
• 2-door (JK) and 4-door Unlimited (JKU) — both fit ✓

• 2009–2018 Jeep Wrangler JK (Late JK) — does NOT fit ✗ — different electrical architecture — see 873105
• Jeep Wrangler JL (2018–2026) — does NOT fit ✗
• Jeep Gladiator JT — does NOT fit ✗
• Jeep Wrangler TJ (2003–2006) / LJ (2004–2006) — does NOT fit ✗

System Specifications

• Part Number / SKU: 873100
• Brand: sPOD
• System: Amber LED SourceLT Power Management Kit (Early JK)
• Circuits: 6 independently switched
• Switching Technology: Solid-state (no relays, no fuses)
• Switch Panel: Amber LED
• Genesis Adapter: NOT included
• Programmable Modes: On/off, momentary, strobe, dimming
• Weather Resistance: Weather-resistant connectors and housing
• Weight: 5.0 lb
• Country of Origin: USA
• Warranty: 5-year manufacturer warranty
• Sold As: Complete kit

Kit Components

• sPOD SourceLT solid-state power management module (early JK)
• Amber LED switch panel
• All required installation hardware

Installation Notes

• Confirm model year before ordering. This kit is for 2007–2008 early JK only. If your JK is 2009 or later, order 873105 instead. Installing the wrong kit on the wrong platform will not connect to your JK’s electrical system.
• Professional installation recommended. Electrical integration requires a qualified automotive electrician.
• Verify mounting locations. Confirm mounting location for both the Amber LED panel and the SourceLT module before installation.
• Verify accessory load. Calculate total amperage draw per circuit before programming.

Engineering Question: Amber LED on an early JK trail build — the right call for night vision preservation. Confirm your model year via VIN before ordering: the 10th character indicates the year (7 = 2007, 8 = 2008, 9 = 2009). The early JK PDC layout and connector architecture are different from the 2009+ JK — the wrong kit will not connect regardless of panel color preference.