Rock Slide Engineering Appalachian Mid Front Bumper | Winch Plate | Steel | 2007–2018 Jeep Wrangler JK

Is This for You?

• You're building a JK that needs a mid-width steel front bumper with winch capability, recovery points, and auxiliary lighting mounts — the Rock Slide Engineering Appalachian Mid Front Bumper in steel is engineered for JK-specific mounting geometry, integrating a winch plate, dual D-ring recovery points, 4" factory fog light pockets, removable wings with 4" auxiliary light mounts, and a removable 20" light bar-capable bull bar in a single platform-specific fitment.
• You want full steel construction for maximum durability in moderate to aggressive off-road use — at 130 lbs, this is an all-steel bumper designed for builds where structural integrity under sustained trail impacts is the priority. The aluminum Appalachian JK mid bumper is available for builds where weight reduction is the primary consideration.
• You want a configurable bumper that can run stubby or full-width — the wings are removable for a stubby profile, and the bull bar is independently removable. Both configurations retain the winch plate, D-rings, and factory fog light pockets in the main shell.

The Result

• All-steel construction, powder-coated textured black — 130 lbs of platform-specific steel bumper engineered for JK mounting geometry. Full steel construction provides the structural integrity required for moderate to aggressive trail use, winch loads, and recovery operations.
• Integrated winch plate with dual D-ring recovery points — winch mount opening with integrated winch plate compatible with standard winch bolt patterns. Two D-ring mounts positioned for correct pull angle on the JK platform. Verify winch footprint before ordering.
• Removable wings with 4" auxiliary light mounts and removable bull bar — wings include mounts for aftermarket 4" lights and are removable for a stubby profile. Bull bar accepts a 20" light bar and is independently removable without affecting the main shell or recovery points.

The Appalachian Mid Front Bumper for JK in steel is a full steel construction at 130 lbs, providing greater structural integrity for moderate to aggressive trail use compared to the aluminum-shell composite variant. The steel construction means winch pull loads and recovery forces transfer through steel hardware throughout — there is no aluminum shell component in the load path. The 4" light pockets in the main shell retain the factory JK fog light position. Wing-mounted 4" light mounts accept aftermarket auxiliary lights outboard of the factory fog light location. The bull bar accepts a 20" light bar. All three lighting positions are independent. At 130 lbs, this bumper adds significant front-end weight — the impact on front-end handling, steering feel, and suspension geometry should be considered, particularly on lifted builds or builds with modified front-end components. Estimated installation time is 2 hours on a stock JK. Sold as a single unit (each). Winch, D-rings, and lights are not included unless explicitly stated.

Audit Table

Appalachian JK Front Bumper Comparison

Verified Fitment — 2007–2018 Jeep Wrangler JK

✔ 2007–2010 Jeep Wrangler JK — X / Unlimited X
✔ 2007–2018 Jeep Wrangler JK — Rubicon / Sahara / Unlimited Rubicon / Unlimited Sahara
✔ 2010–2018 Jeep Wrangler JK — Sport / Unlimited Sport
✔ 2011 Jeep Wrangler JK — 70th Anniversary / Unlimited 70th Anniversary
✔ 2016 Jeep Wrangler JK — 75th Anniversary / Sport S / Unlimited Sport S / Unlimited 75th Anniversary
✔ 2018 Jeep Wrangler JK — Sport S / Unlimited Sport S / Unlimited Rubicon / Unlimited Sahara / Unlimited Sport

✘ Does NOT fit Jeep Wrangler JL (2018+) — JL uses different frame mounting geometry. See FB-F-310-JL for JL/JT fitment.
✘ Does NOT fit Jeep Gladiator JT — JT-specific bumpers required. See FB-F-310-JL.
✘ Verify fitment on modified vehicles — aftermarket bumper mounts, frame modifications, or non-standard front-end configurations may affect fitment.

Installation Notes

• Estimated installation time: 2 hours on a stock JK. Modified vehicles may require additional time or hardware.
• Steel bumper — 130 lbs. Consider impact on front-end handling, steering feel, and suspension geometry, particularly on lifted builds or builds with modified front-end components.
• Winch compatibility: verify your winch footprint matches the integrated winch plate bolt pattern before ordering.
• D-rings included. Winch, lights, and light bar are not included.
• Professional installation recommended for winch mounting and recovery point torque specifications.
• California Proposition 65 warning: this product may expose you to chemicals known to the State of California to cause cancer or reproductive harm.
• Verify fitment on modified vehicles before ordering.

Engineering Question: Is your JK stock or modified? Confirm your model year and trim. At 130 lbs, this steel bumper adds significant front-end weight — confirm your suspension and steering components are appropriate for the additional load, particularly on lifted builds. Also confirm your winch footprint matches the integrated winch plate before ordering. For the aluminum variant or stubby configuration, see the comparison table above.