Rigid Industries 30-Inch Adapt E-Series Adaptive LED Light Bar | Auto Beam Control | Universal | 270413

Rigid Industries 30-Inch Adapt E-Series Adaptive LED Light Bar | Auto Beam Control | Universal | 270413

Is This for You?

You're building a truck, SUV, UTV, or Jeep and you want a 30-inch adaptive light bar with double-row output and automatic speed-indexed beam transitions. The Rigid Industries 30-Inch Adapt E-Series (SKU: 270413) delivers Rigid's Adapt beam technology in the E-Series double-row platform at 30 inches — the most popular light bar length for roof rack, bumper, and grille applications. At low speed, the bar opens to a wide flood for trail navigation. As speed increases, it transitions through driving to a tight long-range spot for open-terrain runs. The E-Series double-row configuration delivers more raw lumen output than a single-row Adapt bar at the same length — making this the higher-output adaptive choice for 30-inch mounting locations.

The Result

30 inches of double-row adaptive illumination with automatic speed-indexed beam transitions at $1,269.99. The E-Series platform's double-row LED configuration delivers higher lumen output than single-row Adapt bars at the same length. This is the adaptive beam solution for builds that need the versatility of automatic beam management and the output of a double-row bar in the standard 30-inch form factor. The sealed electronics, durable housing, and impact-resistant lens deliver sustained performance under vibration, weather exposure, and harsh trail conditions.

Verified Fitment (OFAS Standard)

• Fitment: Universal — compatible with any vehicle equipped with appropriate roof rack, bumper, or grille mounting brackets and a 12V wiring harness
• Mounting: Standard E-Series end-cap bolt pattern — verify bracket compatibility with your specific rack or bumper before ordering
• Wiring: Requires compatible Adapt wiring harness and relay switch system — not included. The Adapt system requires the specific Adapt controller harness — standard light bar harnesses are not compatible.

System Specifications

• SKU: 270413
• Series: Rigid Adapt E-Series
• Length: 30 inches
• Beam Pattern: Adaptive — automatic Spot → Driving → Flood transition based on vehicle speed
• Row Configuration: Double row
• Housing Color: Black, corrosion-resistant
• Lens: Impact-resistant, sealed
• Electronics: Fully sealed, weather-rated
• Weight: 12.0 lbs
• Condition: New
• Warranty: Rigid Industries limited warranty

Installation Notes

Professional installation recommended. The Adapt system requires the specific Rigid Adapt controller wiring harness — standard light bar harnesses will not activate the adaptive beam function. Confirm Adapt harness compatibility with your vehicle's electrical system before ordering. Verify mounting bracket clearance and structural load rating for the 12-lb bar weight before install.

Engineering Question

Choosing between the Rigid 30-Inch Adapt E-Series (270413, adaptive double-row) and the Rigid 30-Inch E-Series Pro Spot/Driving Combo (132313, fixed double-row) for a roof rack build on a Jeep Wrangler JL — does the Adapt system's automatic beam transition on the 270413 produce a meaningfully different light output at the transition speed threshold compared to the fixed Spot/Driving Combo optic on the 132313, and is the Adapt controller harness compatible with the JL's factory electrical architecture without modification? Contact OFAS with your vehicle platform, existing electrical system, and primary terrain profile and we'll confirm which 30-inch E-Series configuration delivers the right beam management for your specific build.