Baja Designs LP6 LED Light Kit | Jeep JL Wrangler 2018-2026 / JT Gladiator 2020-2026 | Rubicon Steel Bumper | Upfitter

Baja Designs LP6 LED Light Kit | Jeep JL Wrangler 2018–2026 / JT Gladiator 2020–2026 | Rubicon Steel Bumper | Upfitter Switch Wiring | SKU: BAJ447671UP

The Baja Designs LP6 Upfitter Kit (SKU: BAJ447671UP) is a complete, vehicle-specific LED fog and driving light kit for 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT equipped with the factory Rubicon steel front bumper and Upfitter switch bank. The LP6 is a high-output LED pod larger than the S2 Sport and Squadron Sport — designed for maximum forward illumination in demanding off-road environments. This kit mounts directly to the factory Rubicon steel bumper light pockets — no cutting, no fabrication. The “UP” designation indicates this kit is wired for the Jeep factory Upfitter switch bank. Confirm your Jeep has both the Rubicon steel bumper and the Upfitter switch bank before ordering. Sold as a complete kit including LP6 lights, Rubicon steel bumper-specific mounts, and Upfitter wiring harness.

Verified Fitment (OFAS Standard)

• Jeep Wrangler JL — Rubicon trim with factory steel bumper: 2018–2026
• Jeep Gladiator JT — Rubicon trim with factory steel bumper: 2020–2026

Does NOT fit: Jeep Wrangler JL or Gladiator JT with standard plastic/Sport bumper — this kit mounts to the Rubicon steel bumper light pockets only. Does not fit Jeep Wrangler JK (previous generation — different bumper and platform). Does not fit Jeep Wrangler JL or JT without Upfitter switches — confirm Upfitter switch bank is present before ordering. Does not fit aftermarket bumpers without confirming LP6 mount compatibility. Does not fit Jeep Cherokee, Grand Cherokee, or other Jeep models.

Two Critical Fitment Confirmations Required

• 1. Rubicon steel bumper: This kit mounts to the factory Rubicon steel front bumper light pockets. Standard JL/JT Sport, Sahara, and Willys models use a plastic bumper without these light pockets — this kit will not fit. Confirm your Jeep has the factory Rubicon steel bumper before ordering.
• 2. Upfitter switch bank: The included wiring harness connects to the Jeep factory Upfitter switch bank. Confirm your Jeep has the Upfitter switch panel before ordering. If not equipped, a different wiring harness variant is required — contact OFAS at 903-347-3875.

LP6 vs. S2 Sport / Squadron Sport

• S2 Sport / Squadron Sport: Compact to mid-size pods — universal mount, multiple pattern options, lower output than LP6
• LP6 (BAJ447671UP, this listing): Larger, higher-output pod — vehicle-specific mount for Rubicon steel bumper, maximum forward illumination for demanding off-road use

What’s Included

• Baja Designs LP6 LED lights — pair
• Rubicon steel bumper-specific mounting brackets — direct-fit, no drilling
• Upfitter wiring harness — plug-and-play for Jeep factory Upfitter switch bank

Technical Specifications

• SKU: BAJ447671UP
• Brand: Baja Designs
• Model: LP6
• Fitment: Direct-fit — Jeep JL/JT Rubicon factory steel bumper light pockets
• Wiring: Upfitter switch bank harness included
• Weight: 8 lbs (complete kit)
• Application: 2018–2026 Jeep Wrangler JL Rubicon / 2020–2026 Jeep Gladiator JT Rubicon — factory steel bumper and Upfitter switch equipped

Installation Notes

• Rubicon steel bumper confirmation mandatory: Confirm your JL or JT has the factory Rubicon steel front bumper before ordering. Check your Jeep’s build sheet or visually confirm the steel bumper with integrated light pockets.
• Upfitter switch confirmation mandatory: Confirm your Jeep has the Upfitter switch bank before ordering. If not equipped, contact OFAS for the correct kit variant.
• Direct-fit installation: Mounting brackets are Rubicon steel bumper-specific — no cutting or drilling required. Follow Baja Designs installation instructions for correct bracket orientation and torque specs.
• Upfitter harness routing: Route the Upfitter harness per Baja Designs installation instructions. Confirm Upfitter switch assignment before finalizing wiring connections.
• Aim before final torque: Aim the LP6 lights at the desired beam angle before torquing mount hardware.
• Legal notice: Auxiliary lighting use on public roads is subject to state and local regulations. Verify compliance before use on public roads.

Installation Warning

Do not order without confirming factory Rubicon steel bumper is present — this kit will not fit plastic or Sport bumpers. Do not order without confirming Upfitter switch bank is present. Does not fit JK. Verify local regulations before use on public roads.

Have you confirmed your JL or JT has the factory Rubicon steel bumper AND the Upfitter switch bank — contact OFAS at 903-347-3875 to verify both before ordering?