Fox 2.0 Performance Front Shock | Single | 0-1.5 in Lift | 2005-2026 Ford F-250/F-350

Fox 2.0 Performance Series Front Shock | Single Unit | 0–1.5" Front Lift | 2005–2026 Ford F-250 / F-350 Super Duty

The Fox 2.0 Performance Series front shock (SKU: AX154) is engineered for 2005–2026 Ford F-250 and F-350 Super Duty trucks running stock height or up to 1.5" of front lift. Aluminum body construction improves heat dissipation over steel-bodied OEM shocks. The IFP (Internal Floating Piston) design separates oil and nitrogen gas to maintain consistent damping performance through heat cycles during towing, hauling, and rough-road use. Tuned specifically for the F-250 and F-350 front suspension chassis — not a universal shock. Sold as a single front shock.

Verified Fitment (OFAS Standard)

• Ford F-250 Super Duty (Front): 2005–2026 — stock height to 1.5" front lift
• Ford F-350 Super Duty (Front): 2005–2026 — stock height to 1.5" front lift

Does NOT fit: Ford F-450 or F-550 (different front suspension geometry). Does not fit 1999–2004 Super Duty (different front shock mounting — see AX151 rear shock for 1999–2026). Does not fit trucks with more than 1.5" of front lift — a longer-travel shock is required. Not compatible with long-travel or coilover conversion suspension systems. Does not fit F-150.

Technical Specifications

• SKU: AX154
• Series: Fox 2.0 Performance Series
• Position: Front
• Quantity: Single shock (order 2 for a complete front pair)
• Body: Aluminum — improved heat dissipation vs. OEM steel body
• Damping: IFP (Internal Floating Piston) — oil/nitrogen gas separation for consistent damping
• Lift Range: 0–1.5" front lift
• Weight: 7 lbs
• Application: Towing, hauling, daily driving, rough-road use

Installation Notes

• Sold as single: This listing is for one (1) front shock. Order quantity 2 for a complete front replacement pair.
• Lift confirmation required: Verify front lift height is 0–1.5" before ordering. Installing on a truck with more than 1.5" of front lift will result in incorrect shock travel and potential bottoming or topping out.
• Torque specs: Upper and lower mounting hardware — torque to OEM specification for Ford F-250/F-350 front shock mounts (verify in Fox install sheet or Ford service manual). Do not overtorque aluminum-bodied shock mounts.
• Alignment recommended: A front-end alignment check is recommended after front shock replacement, particularly if the truck has been running worn shocks that allowed excessive suspension movement.
• Replacement interval: Inspect for oil weeping, fade, or excessive body heat after installation. Fox 2.0 shocks are rebuildable — retain the shock body for future service.
• Pairing note: For optimal handling balance, replace front shocks in pairs. Mismatched damping rates between left and right will cause instability under braking and cornering.

Installation Warning

Do not install on trucks with more than 1.5" of front lift — incorrect shock travel will result in bottoming or topping out under load, causing handling instability and potential shock damage. This shock is not compatible with long-travel or coilover conversion systems. Sold as a single unit — verify quantity before ordering. Once installed, the unit is non-returnable.

What is your current front lift height, payload/tow rating, and are you replacing one shock or ordering a complete front pair?