Carli King 2.5" Remote Reservoir Shock Package | Pintop-Level Tune | Front and Rear | 2.5" Leveling | 2013–2019 Ram 3500 Diesel 4WD SRW | SKU: CS-DPT25SPKG-LVL-1319-D
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
Verified Fitment
This shock package fits the 2013 through 2019 Ram 3500 with a diesel engine, 4WD, and single rear wheel configuration. It is tuned specifically for trucks running Carli's 2.5-inch front leveling springs — the shock valving is calibrated for that spring rate and front geometry. It is not compatible with Carli's 3.25-inch lift height or with factory Air-Assist rear suspension.
| Year Range | Make | Model | Drivetrain | Engine | SRW/DRW | Compatible Lift |
|---|---|---|---|---|---|---|
| 2013–2019 | Ram | 3500 | 4WD | Diesel | SRW only | Carli 2.5" front springs + 0–1" rear lift |
Carli 2.5" front springs required: These shocks are tuned for Carli's 2.5" front leveling coil springs. They are not compatible with factory spring rates or generic aftermarket leveling spacers. Carli front springs must be installed or ordered alongside this package.
Verify fitment by text: (469) 407-7538
Does NOT Fit
| Exclusion | Reason | Correct SKU |
|---|---|---|
| Ram 3500 Gas | Shock valving is tuned for diesel-specific front geometry and spring rates | Confirm gas availability with OFAS |
| Ram 3500 DRW (Dually) | DRW rear axle and geometry differ from SRW — this package is tuned for SRW | Text (469) 407-7538 to confirm DRW availability |
| Ram 2500 | Different platform and spring geometry — Ram 2500 uses separate shock packages | See Ram 2500 leveling shock packages |
| 2020+ Ram 3500 | The 2019+ Ram 3500 has a separate platform-specific leveling system (CS-DPT25-LVL-19-D-3500) | See 2019+ Ram 3500 leveling system |
| 2012 or earlier Ram 3500 | Different platform — prior generation uses different shock specifications | See Carli 2010–2012 Ram 2500/3500 shock packages |
| Trucks running Carli 3.25" lift springs | This package is tuned ONLY for Carli 2.5" front springs — Carli explicitly states it will NOT work at 3.25" lift height | See Carli 3.25" Pintop shock package for Ram 3500 |
| Trucks with factory Auto-Leveling Air-Assist suspension | Not compatible — Air-Assist rams require a separate, specifically tuned shock package | CS-DPT25SPKG-13-D-ALAS |
| Trucks with generic aftermarket leveling spacers (non-Carli springs) | Shocks are tuned for Carli's specific spring rate and geometry — generic spacers produce different spring rates that the shock valving is not calibrated for | Install Carli 2.5" front springs before ordering |
| Trucks with more than 1" of rear lift | Rear shock travel is sized for 0–1" of rear lift. More than 1" of rear lift will cause the rear shocks to bind or bottom out. | Confirm rear lift configuration before ordering |
Verify fitment by text: (469) 407-7538
Component Specifications
| Component | Specification |
|---|---|
| SKU | CS-DPT25SPKG-LVL-1319-D |
| Package contents | King 2.5" Remote Reservoir front shocks (pair) + King 2.5" Remote Reservoir rear shocks (pair) — 4 shocks total |
| Shock diameter | 2.5 inches |
| Shock tuning | Carli custom-tuned Pintop-level valving for 2.5" Ram 3500 diesel leveling geometry |
| Front wheel travel | 10 inches |
| Rear wheel travel | 12 inches |
| Shafts | 17-4 stainless steel — machined and polished from solid piece; no coating to wear off |
| Shock oil | King oil rated to -55°F |
| Shock body | Plated steel — Carli recommends wrapping in 3M for moisture protection in harsh climates |
| Reservoir mounts | Coil-mounted short reservoir brackets included |
| Compatible lift | Carli 2.5" front springs + 0–1" rear lift only |
| Incompatible configurations | 3.25" lift height; factory Air-Assist suspension; non-Carli spring rates |
| Prop 65 | Confirmed |
| Price | ~$2,981.00 (confirm current price with OFAS before ordering) |
What Is and Is NOT Included
Included:
| Component |
|---|
| King 2.5" Remote Reservoir front shocks (pair) — Carli custom-tuned |
| King 2.5" Remote Reservoir rear shocks (pair) — Carli custom-tuned |
| Coil-mounted short reservoir brackets |
| 17-4 stainless machined shock shafts |
Not Included:
| Item | Notes |
|---|---|
| Carli 2.5" front leveling coil springs | Required for these shocks to function correctly. Shocks are tuned for Carli's 2.5" spring rate — must be installed or ordered alongside this package if not already installed. |
| Adjustable track bar | Required for axle re-centering after any front lift. Not included in this shock package. Order separately for the 2013–2019 Ram 3500 platform. |
| Professional installation labor | Shop installation recommended. Not included. |
| Post-install alignment service | Required after any front suspension work. Not included. |
Critical Compatibility
| Condition | Interaction | Action Required |
|---|---|---|
| Carli 2.5" front springs — required | These shocks are explicitly tuned to pair with Carli's 2.5" front leveling coil springs. Carli states these will NOT work at the 3.25" lift height. Using these shocks with a different spring rate or lift height produces a mismatched system where neither the spring nor the shock operates at its tuned performance point. | Confirm Carli 2.5" front springs are installed or being ordered before purchasing this package. |
| Auto-Leveling Air-Assist suspension | Not compatible. Trucks with factory Air-Assist require the CS-DPT25SPKG-13-D-ALAS package — a separately tuned shock set for the Air-Assist system's different rear geometry and spring rate. | Confirm whether your Ram 3500 has factory Air-Assist before ordering. |
| Ram 3500 DRW rear geometry | DRW rear axle track and spring configuration differs from SRW. This package is confirmed for SRW only. | Confirm SRW vs. DRW before ordering. |
| 2020+ Ram 3500 | The 2019+ Ram 3500 platform has a separate Carli leveling system (CS-DPT25-LVL-19-D-3500). Even though some 2019 trucks fall within the 2013–2019 range, the 2019 model year was a significant Ram 3500 platform change. | If your truck is a 2019 Ram 3500, text (469) 407-7538 before ordering to confirm which shock package applies to your exact build. |
Installation Notes
Skill level: Intermediate. Shock replacement is significantly less complex than the complete systems earlier in this Carli session. A qualified shop or experienced installer with proper lift equipment can complete this installation.
Post-install alignment: Full front-end alignment is recommended after any front suspension work, including shock replacement paired with leveling springs.
Reservoir bracket installation: Coil-mounted short reservoir brackets are included. Brackets mount to the front coil spring to position the shock reservoir correctly.
Shock body protection: King shocks are built with a plated steel body. In harsh climates or off-road environments with heavy water exposure, Carli recommends wrapping shock bodies in 3M protective film as a replaceable moisture barrier.
Instructions: Not currently available at carlisuspension.com for this SKU.
Common Questions
This is a shock package — what else do I need for a complete leveling setup?
At minimum: Carli 2.5" front leveling coil springs (required for these shocks to function correctly), an adjustable track bar to re-center the front axle after lift, caster shims to correct front geometry, and extended brake lines. These components are included in Carli's complete Leveling System (CS-DPT25-LVL-13-D) — if you haven't yet lifted the truck, the complete system may be the more straightforward purchase. Text (469) 407-7538 to confirm which approach fits your situation.
Why won't these shocks work with the 3.25" lift height?
The shock valving — piston design, oil flow rates, rebound and compression tuning — is calibrated specifically for the spring rate and geometry of Carli's 2.5" front coil springs. The 3.25" lift system uses a different spring rate and geometry that requires a different shock tune. Carli builds and validates each shock package for its specific application; using a 2.5" tune at 3.25" produces a suspension that is neither optimally calibrated for on-road ride nor for off-road control.
My Ram 3500 has factory Air-Assist rear suspension. Does this fit?
No. Factory Air-Assist Ram 3500 trucks require CS-DPT25SPKG-13-D-ALAS — a separately tuned shock package designed around the Air-Assist system's rear spring rate and geometry. Confirm whether your Ram 3500 has this feature before ordering.
Is this front shocks only or front and rear?
Front and rear — this package includes two front shocks and two rear shocks (four shocks total), all King 2.5" Remote Reservoir, Carli custom-tuned. The draft description suggesting front-only was incorrect.
What is the warranty?
Carli provides a limited lifetime warranty against manufacturing defects to the original purchaser, with proof of purchase at Carli's retail price required. Wear items excluded.
The Obsidian Take
This package is for the 2013–2019 Ram 3500 Diesel SRW owner who already has Carli's 2.5" front leveling springs installed — or is installing them now — and wants the King 2.5" Remote Reservoir shock performance that Carli's Pintop-level complete systems provide, without purchasing the full system. At approximately $2,981 for four Carli-tuned King 2.5" shocks front and rear, this is the most cost-efficient path to King 2.5" performance on this platform provided the springs and geometry components are already addressed.
It is not for the buyer who is starting from stock suspension — the complete Carli Leveling System includes the springs, track bar, caster shims, and brake lines that this shock package does not. It is not for any Ram 3500 with factory Air-Assist suspension — that requires a separately tuned package. And it is not compatible with Carli's 3.25" lift height, which requires different shock valving.
If the springs are already in place and the truck is already leveled, this package is what the suspension has been waiting for.
Manufacturer Data Disclaimer
Specifications are sourced from Carli Suspension product documentation and authorized distributor data. Actual product specifications, component fitment, and compatibility may vary by specific vehicle configuration, existing modifications, and manufacturer updates. Confirm all vehicle specifications with Carli Suspension or OFAS before ordering.
Prop 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Non-Returnable Notice
Suspension components are non-returnable once installed. Confirm model year (2013–2019), engine (diesel), drivetrain (4WD), SRW vs. DRW configuration, existing lift height (Carli 2.5" springs required), and factory suspension type (Air-Assist vs. standard) before ordering. Text (469) 407-7538 with any fitment questions before your order is placed.