Baja Designs LP9 Pro LED Light Pod Pair | Clear Lens | Driving/Combo Pattern | SKU 320003
Couldn't load pickup availability
Before ordering, verify your vehicle details, current setup, and SKU with OFAS fitment support so your upgrade matches your build.
Shipping & Delivery
Free shipping is available within the lower 48 U.S. states. Large or heavy items may ship by freight, and delivery timing can vary by warehouse, carrier, and product availability.
Fitment, Shipping & Product Support
Inspired by Baja Designs' legendary 8" La Paz HID, the LP9 Pro is the highest-output round pod in the entire Baja Designs lineup — a physically separate product family from the rectangular LP4 Pro/LP6 Pro line, not a smaller or larger version of the same body. Each pod combines 9 forward-projecting LEDs (11,025 lumens, 105W/7.6A) with 6 additional Integrated Peripheral Technology (IPT) LEDs (2,280 lumens, 21W/1.52A) for a combined ~13,305 lumens per light and a 200° usable spread — genuine forward throw plus real near-field peripheral coverage from one pod. Direct Ducted Cooling pulls air from the front of the housing to the rear, preventing thermal throttling on long, hot runs. Built-in amber daytime running/backlight function, with low and high power modes. uService lens swapping lets you change pattern or color later without voiding the warranty.
Component Specifications
| Spec | Detail |
|---|---|
| SKU / Part Number | 320003 |
| Form Factor | Round pod — 8" diameter (not the rectangular LP4/LP6 body) |
| Lens | Clear, hardcoated polycarbonate |
| Pattern | Driving/Combo — 42° Wide Cornering/Driving + 6° Spot, Lighting Zone 3 |
| Forward-Projecting Output | 11,025 lumens / 9 LEDs / 105W / 7.6A |
| IPT (Peripheral) Output | 2,280 lumens / 6 LEDs / 21W / 1.52A |
| Combined Total Output | ~13,305 lumens per light |
| Backlight | Amber daytime running light, 2.8W / 0.2A |
| Dimensions | 8.1" H x 8.0" W x 3.3" D |
| LED Life Expectancy | 49,930 hours |
| Housing | Hard anodized machined aluminum, black powder-coated |
| Bezel | Billet-machined aluminum |
| Hardware/Bracket Material | Stainless steel |
| Terminal Connector | DT06-4S Deutsch |
| Lighting Modes | High Beam / Low Beam / Daytime Running Backlighting |
| IP Rating | IP69K — submersible to 9 ft, pressure-washable |
| Impact Rating | IK10 compliant |
| Durability | Exceeds MIL-STD810G, salt spray certified |
| Overvoltage Protection | Built-in |
| Mounting Hardware | Included — stainless steel |
| Wiring Harness | NOT included — PN 640172 |
| Warranty | Limited lifetime |
| Guarantee | 30-day money-back |
| Sold As | Pair (2 lights) |
Critical Compatibility
| Configuration | Status |
|---|---|
| LP4 Pro / LP6 Pro rectangular mounts | Does NOT fit — LP9 is round, entirely different mounting geometry, no adapter exists |
| S2 Sport / Squadron Sport / XL Sport round-pod mounts | Does NOT fit without confirmation — LP9's 8" diameter substantially exceeds these smaller round pods |
| Wiring harness 640172 | Correct harness for this pair — required, not included |
| Upfitter Lock-Out Harness (sPOD / Switch-Pros / factory upfitter) | Available as an alternative to 640172 for switch-panel integration |
| Amber lens, Driving/Combo | Separate SKU 320013 — same body, different lens |
| Amber lens, Spot only | Separate SKU 320011 — narrower beam, longer throw, less peripheral spread |
| Racer Edition | Distinct configuration — same power draw, tighter beam, less side spread than standard |
Installation Notes
This is a moderate-skill install — a dedicated 12V wiring run, a compatible harness, and a mount rated for an 8" pod under vibration load. Mounting hardware (stainless bolts/fasteners) ships with the light; the bracket itself is a separate confirmation — do not assume a bracket you already own will fit.
Wiring harness PN 640172 includes plug-and-play Deutsch connectors, a built-in splitter for two LP9 or LP6 lights, large ring terminals, a 3-position 30A DC-rated DPDT switch for independent high/low beam control, a spliced extra lead for the amber DRL function, a 20A/40A relay, a 30A inline fuse, 12 ft of wire from battery to instrument cluster, and 15 ft from instrument cluster to the light.
If you're running sPOD, Switch-Pros, or a factory Upfitter switch panel, use the Upfitter Lock-Out Harness variant instead of 640172 — it's built to integrate with those systems.
Common Questions
Will this overheat and dim under sustained high-speed use?
No — Direct Ducted Cooling actively channels airflow front-to-rear through the housing specifically to prevent thermal throttling on long desert runs.
Am I locked into this exact beam pattern forever?
No — uService lens swapping lets you change pattern or color later without voiding the warranty.
Can I run this off my aftermarket switch panel?
Yes, but not with the standard harness — confirm the Upfitter Lock-Out Harness if you're on sPOD, Switch-Pros, or factory Upfitter.
How is LP9 Pro different from LP4 Pro or LP6 Pro?
LP9 Pro is round and 8" in diameter; LP4 Pro and LP6 Pro are a separate rectangular product line with their own independent mounting hardware — not a smaller or larger version of the LP9 body.
What's the difference between standard and Racer Edition?
Same power draw. Standard balances near-field and far-field spread; Racer Edition trades peripheral coverage for a tighter, longer-throw beam.
The Obsidian Take
The LP9 Pro is for the builder who has outgrown the Squadron/XL Sport round-pod tier and wants the single highest-output round light Baja Designs makes — roughly 13,300 combined lumens per light between the forward beam and the IPT peripheral spread, with a design lineage tracing back to their own La Paz HID.
It is not the right pick if you're trying to match or expand an existing LP4/LP6 rectangular setup — the mounting systems are entirely incompatible, no adapter bridges that gap. It's also not a simple plug-and-play accessory light; between the required 640172 (or Upfitter) harness and the dedicated 8" mount, this is a considered install.
Choose standard (this listing) for genuine all-around trail and desert use where you want both distance and peripheral light. Choose Racer Edition instead if you're strictly running high speed and want every lumen thrown further down the trail rather than spread to the sides.
Non-Returnable Notice: Electrical lighting products that have been installed or wired are non-returnable. Confirm mount compatibility and harness selection before ordering.
⚠️ California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information visit P65Warnings.ca.gov.
Manufacturer Data Disclaimer: Specifications sourced from Baja Designs and authorized distributor documentation. Obsidian Forged Auto Supply is an authorized Baja Designs dealer. Manufacturer specifications are subject to change without notice.