Axiom Supply Sway Bar End Link Kit | 7-9 in Front Lift | 2001-2019 GM 2500HD/3500HD

Axiom Sway Bar End Link Kit | 7–9" Front Lift | 2001–2019 Chevy Silverado / GMC Sierra 2500HD & 3500HD

The Axiom Sway Bar End Link Kit (SKU: AXGMEL79) is an extended-length end link kit engineered for 2001–2019 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks running 7–9" of front suspension lift. At 7–9" of lift, factory-length sway bar end links operate at an extreme angle that reduces sway bar effectiveness, causes premature end link wear, and can result in binding or failure under load. These extended links restore the sway bar to its correct operating geometry, improving roll control, reducing body sway, and maintaining predictable handling on-road and off-road. Sold as a complete end link kit. Covers GMT800/GMT900 (2001–2010) and K2XX (2011–2019) platforms.

Verified Fitment (OFAS Standard)

• Chevy Silverado 2500HD: 2001–2019 — 7–9" front lift only (GMT800, GMT900, K2XX)
• Chevy Silverado 3500HD: 2001–2019 — 7–9" front lift only (GMT800, GMT900, K2XX)
• GMC Sierra 2500HD: 2001–2019 — 7–9" front lift only (GMT800, GMT900, K2XX)
• GMC Sierra 3500HD: 2001–2019 — 7–9" front lift only (GMT800, GMT900, K2XX)

Does NOT fit: Trucks with less than 7" of front lift — extended end links on a stock or mildly lifted truck will place the sway bar at an incorrect angle and reduce roll control. Does not fit trucks with more than 9" of front lift — a longer end link is required. Does not fit 2020–2026 Silverado/Sierra HD (T1XX platform — different sway bar geometry). Does not fit Silverado/Sierra 1500.

Technical Specifications

• SKU: AXGMEL79
• Type: Extended sway bar end link kit
• Lift Range: 7–9" front lift
• Quantity: Complete kit (both sides)
• Construction: Heavy-duty metal — corrosion-resistant finish
• Design: Extended-length for correct sway bar operating geometry at 7–9" lift
• Weight: 5 lbs
• Application: High-lift GM HD builds — towing, hauling, off-road

Installation Notes

• Lift height confirmation required: Measure actual front lift height before ordering. This kit is engineered specifically for 7–9" of front lift. Installing on a truck outside this range will result in incorrect sway bar geometry and reduced roll stability.
• Complete kit: This listing includes end links for both sides — left and right. Replace both simultaneously to maintain equal sway bar leverage across the axle.
• Torque specs: Torque end link hardware to OEM specification for GM 2500HD/3500HD sway bar end link mounts (verify in GM service manual or Axiom install sheet). Do not overtorque — end link ball joints require correct preload to function properly.
• Inspection interval: Inspect end link ball joints for play, binding, or wear at regular service intervals. High-lift applications subject end links to increased angularity and load — inspect more frequently than stock-height applications.
• Alignment check: After any suspension modification at this lift height, verify front-end alignment is within spec. Sway bar end link replacement alone does not require alignment, but confirm no other geometry changes occurred during installation.

Installation Warning

Do not install on trucks with less than 7" or more than 9" of front lift — incorrect end link length will place the sway bar at an improper operating angle, reducing roll control and accelerating end link wear. Do not install on 2020 or newer GM HD (T1XX) — different sway bar geometry. Replace both end links simultaneously — mismatched lengths will cause unequal sway bar leverage and unpredictable handling. Once installed, the kit is non-returnable.

What is your exact front lift height (confirm 7–9"), model year, and platform (GMT800/GMT900 or K2XX) — verify before ordering?